Triumph Speed Twin rear shock upgrade | Ohlins from a Thruxton R

Рет қаралды 46,255

4 жыл бұрын

In this video my Speedy gets an early Christmas gift, I install new Ohlins rear shocks that come stock on the Thruxton R. I set them to stock settings for the first test ride and like the results. in the near future I will make an update video with fine tuned settings!
Subscribe here: kzfaq.info?s...
Social Media:
Facebook / / adam.croll
Instagram / acroll80?h...
Artlist Music Used in this video:
Chanson for Siv by, Ian Post
Blitz Glitz by, Stefano Mastronardi
Desire by, KOLA
Far from Houses far from doors by, Glories
Disclaimer: I am an Amazon Affiliate, by clicking these links it will help me a bit financially, Thanks if you do!!
Camera Gear I use:
Sony A6400 / amzn.to/2XhPd7r
Sony RX100 vii / amzn.to/2CILUwH
Sony RX0 ii / amzn.to/32JLgtD
Sony Lens 10-18mm f4 / amzn.to/2Kor5eb
Sony Lens 18-105mm f4 / amzn.to/3541ZJu
Sigma prime 30mm f1.4 / amzn.to/32PpO6u
DJI Osmo pocket / amzn.to/2CMu7ox
Deity V-Mic D3 / amzn.to/2NR7GFb
Rode Video Micro / amzn.to/2CKKZff
Rode Wireless GO / amzn.to/2O7b5OI
Purple Panda Lav Mic / amzn.to/2Kr8Vv0
GoPro Hero 8 Black / amzn.to/2Ql17vT
GoPro Hero 7 Black / amzn.to/2TfJ3Bb
GoPro Hero 5 Black / amzn.to/2SzY8NW
Manfrotto Tripod / amzn.to/2Ekrfzk
Lume Cube / amzn.to/2Vp94zs
DJI Mavic Air fly more / amzn.to/33RYKog
Riding Gear I use:
Shoei GT-Air / amzn.to/2EBlcIg
Dainese 8-Track leather jacket / amzn.to/2Qk1vuL
Icon Truant ii boots / amzn.to/2TYUSAe
Alpinestar SMX-1 gloves / amzn.to/33YMOS1
Bilt Ironworkers riding jeans / amzn.to/32O81wz
Quad Lock phone mount system / amzn.to/350FxRy
Cardo Pack Talk Bold w/JBL / amzn.to/372Ryrr

Пікірлер: 109

@TheWanderingMoon 4 жыл бұрын

Hey Adam. For future reference; just jack the bike up (no paddock stand). When you remove the old shocks, the swing arm will relax down, but the bike frame will stay put. Easy one-person job.

@MotoGoato 4 жыл бұрын

axle stands under the footrest mounting brackets work well too, or even better - an ABBA stand (lifts the bike from the swingarm pivot)

@adammoore9088 4 жыл бұрын

It's also a lot easier if you do one shock at a time. The swing arm doesn't relax much when one shock is still in place.

@stevendilnott4399 2 жыл бұрын

PADOCK STAND IS HOW YOU DO IT MATE, TRY IT, SIMPLE!!!!!!!!!

@g.g.6362 2 жыл бұрын

I went for YSS rear shocks,as I couldn't justify the cost of Ohlins,or like the yellow......The YSS look and work beautifully,are much lighter than stock,and cost about half of the Ohlins. Progressive springs and adjustable preload caps up front, have made a big difference too,and together are a huge improvement over stock components, and good enough for fast road riding I have found. Love my Speed Twin,and great videos....👍

@David-vb8tg Жыл бұрын

shamo

@kingskillz88 4 жыл бұрын

Thanks for uploading this! I've been wanting to upgrade the shocks on my speed twin.

@RandomGRK 4 жыл бұрын

Looks incredible and the bike sounds so good.

@scruffy-lookingnerfherder230 4 жыл бұрын

No riding boots.... As a former EMT, I am scared for you. Thanks for the vid, and be safe out there.

@peterkoning21 4 жыл бұрын

I never ride without some ankle protection !!

@hemanthkumar-sk2zd 4 жыл бұрын

Thanks for that Adam . Waiting for it for a long time. Next modification should be horn or tank protection film. I am waiting

@NicePantsLance 4 жыл бұрын

I'm already planning mods before I buy the bike 😅 sweet video 👍

@mr.sergiux4000 4 жыл бұрын

Adam I love your motorcycle, now with ohlinns back !!!😍 It has me crazy !!!it will be my next motorcycle.. greetings from Spain!! Gas ✊🏼

@peterroda8156 3 жыл бұрын

Really nice!

@cclay2007 4 жыл бұрын

I also fitted a pair of Ohlins Thruxton R shocks to my Speed Twin. As Adam says they are stiffer but the improved damping is very noticeable. I really like them. I fitted some black springs, I will be fitting an Andreani cartridge kit in the new year. Great vids Adam

@seanrubin3127 4 жыл бұрын

Adam, love your bike, I just got a 2020 in the same color. I too added the ohlins shocks, and have found from doing this is the past, if you place a scissor jack on the rear tire, and turn it up to where it just putting pressure on the underside of the fender, it allows you to move the rear of the bike up and down, to help you get the shocks on very easily. I did this when putting mine in, and was done with the job in 20 mins, this was taking my time and wiping things off as well. Thanks for the great videos

@tinks43 4 жыл бұрын

Oh man I feel for you with the fitting. I hope there was no damage.

@erwinballings9155 4 жыл бұрын

Looks great

@Richard-il3lv 11 ай бұрын

You made that really difficult for yourself mate, plenty vids about with good tips 👍 Like all your vids 👍

@michaelmclarney1994 2 жыл бұрын

Hi Adam, loving your channel and you seem to swear when doing jobs, just like me when I drop stuff etc. Nice shocks and I'm hoping to get a speed twin when funds allow. A useful tip when changing shocks is to do one at a time, so the other is supporting most of the bikes weight while you work. I learnt that one the hard way too!

@sunnyverghese8232 4 жыл бұрын

Hi Adam, love the way you do all the mods yourself . Can we have a video of all the tools you have in your garage for the speed twin .Will be useful for all who wish to follow in your footsteps 😬. Keep up the good work !!!

@jaimeserrano1234 3 жыл бұрын

The Blue Label on the Reservoirs? Come on Ohlins! Come On!

@mitchsmith71 2 жыл бұрын

Probably been said already below, but change them one at a time whilst bike is on side stand, easy job for one person that way. It will sag when one spring is off, but with it on the side stand, to fit the replacement spring simply pull the bike up towards you a little whilst its leaning on the side stand.

@Wataru3298 4 жыл бұрын

I Changed to Nitron suspension. The ride is good.

@stevesteve1965 4 жыл бұрын

Have the same on mine.. Much more supple. 👍

@rickn8289 4 жыл бұрын

Have ohlins on the back of my street glide and love them. You really have to try different combination of preload and settings but once they are dialed In they are awesome!

@hemanthkumar-sk2zd 4 жыл бұрын

And a 360 tour in all mods in cinematic view. I must say your shots a decent

@peterstim44 4 жыл бұрын

I went with KTech Razor rear shocks and Tec Bike Parts front springs and adjustable preload caps. The rear shocks make a huge difference if you ride this bike a brisk or faster pace. The fronts were a less noticeable change. Will go with a front cartridge refit once the piggy bank fills back up.

@anthonysarantis7650 2 жыл бұрын

The sound of the left shock scratching the paint on that left cover got me sad :P

@drdpetizo 4 жыл бұрын

They look awesome! I’d like to know how they feel when you get them dialed in. Also, curious what you’ve been able to use rear rack for?

@GBMatthew07 3 жыл бұрын

Those yellow springs would drive me mad.

@robgerety 6 күн бұрын

Did you set the spring pre load and measure sag? Also, how did you have the bike supported - center stand? Center jack? Seems you don't want the bike on a paddock stand for this job? Nevertheless - job done and it looks great.

@scoombs3871 3 жыл бұрын

I am thinking about getting these myself. The back end really is a bit skittish at about 80+. It's noticeable how it suddenly feels planted down again when speed drops below a certain point 80-85mph. Big investment though.

@hughraymond6318 4 жыл бұрын

Very nice, you can see the quality...............it was actually the weight of the rack made it harder, time to take the rack off ‘till you need it ha ha!!

@MaxMeridius0920 4 жыл бұрын

Thanks for sharing - do you have room in your garage for a J&S Jack - they’re a little pricey but I find it an amazing tool

@stina6762 4 жыл бұрын

As said below . You didn’t need to struggle like that , I just jacked mine under the sump guard and let the swing arm drop to the required height. About 30 minutes the pair .

@shawnjoseph7522 2 жыл бұрын

what thruxton shock model s36?

@clautamiralves712 4 жыл бұрын

They look awesome. How can I find a set that will fit on my 2003 vmax? Does anybody know?

@alexrodrigues1861 4 жыл бұрын

I wish I had your skills to make so mods LOL

@robertdavis4761 2 ай бұрын

Can you still get those Ohlins shocks? Big difference in handling? What do they cost?

@barcibus 3 жыл бұрын

I want to know the list of specific tools Adam uses for the Speed Twin.

@hein_Solo 2 жыл бұрын

is it possible to have the front shocks from thruxton on the speed twin?

@subvertit 4 жыл бұрын

Well now I'll have to do the same! Been eyeing the Nitron rears, might do some Ohlins ... but in black.

@andreszanotti12 3 жыл бұрын

Hello, where did you buy the ohlins pls

@cubiv9304 2 жыл бұрын

Does the ride feel taller from the rear?

@joep6644 Жыл бұрын

I would have gone for the Ohlins Black

@carlosdaguzzi9340 Жыл бұрын

Boa tarde amigo. Sou de Portugal. Vejo todos os seus videos. Amigo tenho TRIUMPH SPEED TWIN 2022. Qual o Sag settings da frente e tras para a speed twin? Com piloto e sem piloto. Muito obrigado

@Neltheros 3 жыл бұрын

Do you know how the silver allen bolt on the clutch box next to the Triumph logo is named? I am talking about the one that is visible at 3:32 at the bottom of the bike. I've had mine stolen on my Street Scrambler and who knows for how long I've been riding without it! Do you have any idea about its purpose? Is it to just hold the frame together?

@HealingtheHidden Жыл бұрын

Hey Adam, just curious if you needed to put washers between the shock and the frame, and then the shock and the luggage rack? Been trying to find this info online.

@SirTrizzle 12 күн бұрын

Wonder why you can’t replace one side at a time…

@Sandy-yt7mk 3 жыл бұрын

Ohlins must be a standard issus to all triumph classic.

@Speedytrip 4 жыл бұрын

I've yet to try a bike with Ohlins that was reasonably comfortable on public roads (at least not on our winter-beaten canadian roads)...they are high quality, they look good, but they are really better on a racetrack than on the road. I've ridden many, spent a ton of cash on having them adjusted, revalved, resprung, always ended up hating them (I even sold my 1200 Scrambler because of the Ohlins...after spending nearly 1000$ to have them improved). It will improve handling, give it a sporty ride, but comfort...no. Ohlins is now on my black list.

@Graeme4561 Жыл бұрын

I totally agree, I am also not a big fan of Ohlins for the road, Although I did read the Ohlins set-up on the Ducati 950 Supersport S is supposed to be very good, not sure what spring rates they use.

@gonzo221 4 жыл бұрын

Good job man, looks great. It's funny, the reason I went with the thruxton R instead of the speed twin was for the suspension. I just ended up swapping out the spoke wheels for the speed twins cast wheels. So I guess you could say I went the opposite way you did to land in almost the same place 😛

@johnpoon8 4 жыл бұрын

Hello, Can you give a little more info on your wheel swap? Im interesting in some spoke wheels for my Speed Twin too. Thx

@gonzo221 4 жыл бұрын

@@johnpoon8 hey, no problem man. It's a straightforward swap. There's no modification needed at all. All the hardware is the same. Just find some spoked wheels from a thruxton, install the guide tube and bearings then use the wheels spacers from your speed twin. I would advise that you use new disc bolts when you swap over the rotors as the heat cycling can weaken them over time. I got a nice set of titanium bolts from A&J Cycles. Let me know if you have any other questions.

@johnpoon8 4 жыл бұрын

@@gonzo221 any particular year truxton or model?

@gonzo221 4 жыл бұрын

@@johnpoon8 Any model swaps over. I posted a quick video of the swap on my Chanel as well.

@marcjohnson7734 4 жыл бұрын

I found my thruxton r shocks back breakingly hard I'd love some more just comfort suspension unfortunately I love the look but not interested in having hard the deal was too good to pass up though so I'll probably down grade to comfort over performance handling

@erickrm 4 жыл бұрын

Hey Adam , did you have to install diff bushings in order to get these babies to fit? For some reason I thought they might need diff bushings for mounting, good shit.

@AdamCroll 4 жыл бұрын

Bushings are the same, it’s a direct fit.

@paulanderson6860 2 жыл бұрын

Remove top nuts first and have bike jacked up. The rea wheel will fall down below exhausts.

@petarbaumgartner9687 4 жыл бұрын

How about tuning the suspension? Will you be installing cartridge kit for the front forks?

@AdamCroll 4 жыл бұрын

I will be doing those in the future for sure!

@chefsecretservice-healthy-8158 4 жыл бұрын

Did you look at the Fox by Triumph I like the fact that those are black.

@ronaldvangulden7314 4 жыл бұрын

Looking good! Puting a jack between the rear wheel and the fender probably could have made your life a whole lot eassier.

@alpinab14 4 жыл бұрын

thats what i was thinking before he scratched the living shit out of everything but hes a nice dude and i appreciate his vids on the lovely speed twin so not going to give him a hard time

@ronaldvangulden7314 4 жыл бұрын

@@alpinab14 wasn't trying to give him a hard time but thought it might help the next guy trying to swap shocks.

@alpinab14 4 жыл бұрын

@@ronaldvangulden7314 ah sorry man that was my bad wording , i meant me as in that i never wanted to give him a hard time because to be honest that was painful for me to watch , should have done so many things different which made it 10 times more difficult for himself and that massive scratch left on the left side panel , ouch , he has very fast bruce lee hands , when he works on a bike he works on them like he is trying to get everything done as fast as humanly possible , no finesse , not just on this vid but on every diy vid, its just his way and style of doing things , wish he would just slow down and take his time more but hay each to there own its just my ocd kicking in thats all, and your totally right , by having a jack supporting the bum this job would have been a pleasure and a breaze, but seeing the speed twin evolve is still a pleasure so all good

@tomrandom7091 7 ай бұрын

Does this mod really feels better? Also, the looks, don't you think it breaks a bit the styling? ( the ohlins do really look modern ). PS: I have a Street Triple but i test rode the Speed Twin and i'm wondering if switching it for some time.

@thecappy 4 жыл бұрын

Ohlins FKS218 fork cartridge kit next.

@zeubilamouche6640 4 жыл бұрын

HI Adam, do you think you will install a fork cartridge kit as Matris F15K to equilibrate rear and front system ? If you will, i’d like to see it on a new video. Regards from France...

@AdamCroll 4 жыл бұрын

I will be doing that eventually yes!

@vaderboy3147 4 жыл бұрын

Adam awesome videos mate. Thank you. Quick question. Do your front brakes squeak?

@AdamCroll 4 жыл бұрын

They squeal ever so slightly once and awhile. Not nearly as bad as some have been experiencing. I’m not going to touch it unless it gets bad or until I need new pads.

@dicer82 4 жыл бұрын

Do you feel the bumps more? Would you say that the bumps are more rough now?

@AdamCroll 4 жыл бұрын

It has a lot of adjustments so it can be stiffer or softer whatever you choose. I set it up to be a bit stiffer, it’s not jarring by any means just a bit more compliant in the twisties

@SolarisDeath 3 жыл бұрын

Are these the Ohlins STX36? Looking to find the proper part number.

@AdamCroll 3 жыл бұрын

I’m not sure, maybe a dealership could tell you a part number. All I know for sure is that they were direct take offs from a Thruxton R. I’ll try to find some sore of numbers on them when I get a minute to look.

@StefanSu91 2 жыл бұрын

Change one at a time man!

@mikenuke6110 2 жыл бұрын

Which model shock is that

@AdamCroll 2 жыл бұрын

Stock ohlins from a thruxton

@alansmith5255 3 жыл бұрын

Did you buy your paddock stand from Harbor Freight if so what do you think of it? I need a paddock stand for my speed twin

@AdamCroll 3 жыл бұрын

It’s not bad, the design is made to look strong and modern industrial. But up close it looks over designed and cheap. simple steel tube design is just fine. The price is right though and I feel safe using it.

@alansmith5255 3 жыл бұрын

@@AdamCroll is it from Harbor Freight

@AdamCroll 3 жыл бұрын

@@alansmith5255 yes

@jamesmorrison5632 4 жыл бұрын

Wishful thinking, buy the Th Thruxton , and put the handle bar risers on it .

@AdamCroll 4 жыл бұрын

I do like the thruxton front suspension but I can’t really enjoy the look or its tank. The spoked wheels are cool to!

@jamesmorrison5632 4 жыл бұрын

@@AdamCroll same here, that's what I was referring to

@stevenb3075 4 жыл бұрын

I traded my Thruxton R due to the terrible ergos (even with a handlebar kit), and rock hard suspension. I knew when Adam put the stock Thrux price-point Ohlins shocks on that they would be stiff as a board. I'll look at some other aftermarket suspension bits if I ever want to upgrade my Speed Twin.

@timsheldon8985 Жыл бұрын

I totally don't understand the color.. I'm looking to upgrade my speed twin also.

@CanonKind 4 жыл бұрын

Next video: Tour of all the 4 stock parts on my Triumph :')

@stevendilnott4399 2 жыл бұрын

use a padock stand so easy, just fitted them, PADOCK STAND PEOPLE!!!!!! SIMPLE AS!!!

@UncleWally3 4 жыл бұрын

I adore the Thruxton R but as an ol’fart I have to admit, for any amount of time, it’s No Comfy For Old Men. This is an interesting alternative.

@olegcheremin4495 4 жыл бұрын

I wonder how they compare to the ones from TEC bike parts UK also interesting to see your mod for front forks (if any)

@AdamCroll 4 жыл бұрын

Front forks eventually, haven’t decided which kit yet though. As far as Tec suspension I’ve heard a rumor that they were manufactured in China and some people have had less than favorable reviews so I didn’t go that direction. Ohlins have a long good track record and I got a great price. I’m sure any aftermarket shock is better than the stock ST ones though! 😀

@olegcheremin4495 4 жыл бұрын

@@AdamCroll Ok, now my choice got more complicated! will have to wait till you go with this mod first))

@HORNET6 4 жыл бұрын

Title this how not to replace rear shocks! Don't ever do this on a paddock stand as the weight of the bike is loading the shocks. Get a lift or jack to lift the bike in the middle as that will unload the shocks. Change them one at a time...easy! You do not need two people...you just need to know what you're doing. Preload is not a substitute for shock length...they are two different things.

@johnbonnperalta785 4 жыл бұрын

Black would've been cooler

Жыл бұрын

Remember to stop and think for a few seconds every now and then. Violence is not the answer. But rational thinking is.

@lipsee100 4 жыл бұрын

Yeah I would paint those springs,(Black),,they jar with the red.Ride safe in your trainers...

@richardpearson4248 4 жыл бұрын

Love the bike me personally think the springs would look better black tec bike parts uk do a set of piggyback shocks black and silver only £150.00 but like all your video's 👍