How to Replace Headlight Assemblies Toyota Prius 2004-2009

No video

How to Replace Headlight Assemblies Toyota Prius 2004-2009

Рет қаралды 16,236

10 ай бұрын

Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALH...
This video shows you how to install new, quality, TRQ headlight assemblies on your Toyota Prius 2004-2009. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This process should be similar on the following vehicles:
2004 Toyota Prius
2005 Toyota Prius
2006 Toyota Prius
2007 Toyota Prius
2008 Toyota Prius
2009 Toyota Prius
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obrt/1A...
• 10mm Socket 1aau.to/objY/1A...
• 21mm Socket 1aau.to/oanR/1A...
• Trim Tool Set 1aau.to/oahK/1A...
• Torque Wrench 1aau.to/oaM2/1A...
• Gloves 1aau.to/oaoA/1A...
• Safety Glasses
• Floor Jack 1aau.to/oab9/1A...
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 10

@TRQ 10 ай бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@msvvero 8 ай бұрын

I have to chuckle. What you make seem easy enough, I know if I tried it, it would take me days and would end up at the mechanic anyway. Thank God for computers and big data - else I’d struggle to make a living.

@revelacionhumanameditacion6718 9 ай бұрын

Thanks for the video, I needed to see this, just to make sure my mechanic wasn’t overcharging.

@m0mb0 3 ай бұрын

Great video, I would add that you should test the lights before doing all the reassembly

@NotSure7474 6 ай бұрын

Great tutorial, to the point, all steps clearly shown. Subscribed

@Channel-jj9zw 8 ай бұрын

Thanks for taking the time to make this very detailed and easy to understand video.

@dhall4969 4 ай бұрын

Note if you have an OEM HID system don’t order the base (halogen) fixture. The bail securing the bulb is completely different. As well you would need to rewire the connector to the bulbs for 12volt bypassing the high voltage ballast. Third the round access door behind the bulb is different sized. Don’t ask how I know. Mod back to halogen may be cheaper but not worth the hassle. Loved your video. Keep it up