Buy Now!
New Transmission Mount from 1AAuto.com 1aau.to/ib/1ATMT00143
This video shows you how to install a new made to fit TRQ transmission mount on your 2007-2012 Nissan Versa. Like many other load bearing parts on your vehicle, the transmission mount contains rubber bushings for smooth, comfortable driving. And like other parts, the rubber bushings can wear and rot over time. It’s a good idea to replace them when that happens.
This process should be similar on the following vehicles:
2007 Nissan Versa
2008 Nissan Versa
2009 Nissan Versa
2010 Nissan Versa
2011 Nissan Versa
2012 Nissan Versa
Tools you will need:
• 10mm Socket 1aau.to/obf4/1AXAA00017
• 13mm Socket 1aau.to/obAB/1AXAA00015
• 16mm Socket 1aau.to/obAB/1AXAA00015
• 18mm Socket 1aau.to/oakr/1AXAA00043
• 8mm Socket 1aau.to/obf4/1AXAA00017
• Trim Tool Set 1aau.to/oae8/1AXXX00006
• 1/2 Inch Ratchet 1aau.to/oakr/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/obf4/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obAB/1AXAA00015
• Gloves 1aau.to/oaf7/1AXSS00048
• Safety Glasses 1aau.to/o83/1AXAA00343
• Floor Jack 1aau.to/o86/1AXAA00068
• Jack Stands 1aau.to/oWp/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.