TRUGLO BACKFLIP 100 gr Broadhead Test

No video

TRUGLO BACKFLIP 100 gr Broadhead Test

Рет қаралды 4,195

2 ай бұрын

This is a test of the 100 gr TruGlo Backflip 3 blade mechanical broadhead.
Here is summary of my 2024 Testing Procedure & Scoring w/the scores of this head posted in parenthesis as well.
1. Flight Forgiveness (20%, 21 pts)
I'm using a Killer Instinct SWAT X1 crossbow, mounted to a BOG tripod, shooting a 670 gr Bishop Archery GOAT bolt (300 fps) at 30 yds. Field points consistently hit in the 10 ring & bullseye. I use the exact same bolt to shoot the broadhead. The only difference in the two shots is the broadhead's flight forgiveness vs that of the field point. A bullseye gets a score of 11/10, or a perfect score of 20 + 1 Bonus Point. The 10 ring gets a 10/10, or 20 points; a 9 ring gets a 9/10 or 18 points...& so forth, with each wider ring being 1/2" farther from the bullseye. Mechs are also given 1 Bonus Point for extra forgiveness.
2. Cut Size (20%, 14.3 pts)
The more tissue being cut, the more lethal the head, all else equal. The entrance cut, total cut, & width of the cut (a crucial variable for bloodletting) are all scored:
The entrance cut size is compared to a standard of 2.5" then that fraction is weighted to 7% of the score. (1” = 2.8 pts)
The max cut size is compared to a standard of 2.5" as well, then that fraction is is weighted to 7% of the score. (2.25” +..69" = 2.94" = 7 pts)
The max cutting diameter is compared to a standard of 2.0", then that fraction is weighted to 6% of the score. (1.5" = 4.5 pts)
3. Blades (20%, 18.11 pts)
Initial sharpness (9%, 253 grams = 9.47/10 = 8.52 pts & Edge Retention (9%, +45 grams = 9.1/10 = 8.19 pts) are measured using the Edge On Up Sharpness Tester. The pressure needed for a blade to cut thru a copolymer wire is measured in grams.
Edge Retention is the loss of sharpness after the head is shot in Penetration Test 1, thru 1/2" MDF & 2/3" rubber foam mat & Clear Ballistics FBI gel. For every 50 "grams" of sharpness lost, 1 point is deducted from 10.
What are some sharpness scores for common edges?
A butter knife takes 2000 grams of pressure to break the co polymer wire.
A new high end cutlery edge: ~ 375 grams of pressure.
A utility razor blade: 200 grams.
Based on the many broadheads I have tested, here is my scoring scale:
Out of the Box Sharpness:
0-200 gr: 10
201-300 gr 9
301-400 gr: 8
401-500 gr: 7
501-600 gr: 6
601-700 gr: 5
Ease to resharpen or replace blades is judged & given 2% of the score. (7/10=1.4 pts)
4. Penetration (20%, 13.11 pts)
There are 2 penetration tests:
Pen Test 1: 1/2" MDF, 2/3" rubber foam mat, Clear Ballistics FBI gel. Depth of penetration is compared to a standard of 9" & weighted to 10% of the score. (8.5" = 9.44 pts)
Pen Test 2: Layered cardboard. # of layers penetrated is compared to a standard of 70 layers & weighted to 10% of the score.
( 50 layers= 7.14 pts)
5. Durability (20%, 16.2 pts)
Each head is shot thru 1/2" MDF 3 times. Its condition is judged 1-10 & weighted to 12% of the score. (10/10 = 12 pts)
If a head survives that, it is then shot thru 22 ga steel plate twice. Its condition is judged 1-10 & weighted to 5% of the score. (3/10 = 1.5 pts)
If a head survives that, it is then shot into concrete once. Its condition is judged 1-10 & weighted to 3% of the score. (9/10 = 2.7 pts).
Steel plate & concrete are certainly not "realistic" mediums, but they do reveal the outer limits of a head's durability.
BONUS:
+1 pt: mech flight forgiveness
+1 pt no O ring
+1 pt cut size greater than baseline
TOTAL SCORE: 89.19 pts = 9 Golden Arrows
Price: $13.33/head
Special Notes:
Please check out my sponsor, Stay Sharp Guide. staysharpguide... or @Innovative Outdoorsman They make excellent broadhead sharpeners. The support I receive from them has helped me improve my channel
I also have some Discount Codes I can share:
Accubow: LUSK10 saves 10%
Afflictor: LUSK10 saves 10%
Accubow: LUSK10 saves 10%
Afflictor: LUSK10 saves 10%
Annihilator: LUSK10 saves 10%
Bishop Archery: LUSKFIVE saves $5 on any order
Contact-Archery.com (formerly Method & Vector): LUSK10 saves 10%
Crimson Talon: LUSK10 saves 10%
Easton Bowtruk 2: LUSK25 saves $25 and Free Shipping
Evolution Outdoors--Jekyll & Hyde heads: LUSK10 saves 10% on any order
Exact Archery: LUSK10 saves 10%
Kayuga Broadheads: LUSK10 saves 10% on any order.
Lathrop & Sons Synergy Footbeds: Lusk1000 saves $10 on any order
Ozcut Broadheads: LUSK10 saves 10%
SEVR: LUSKFIVE saves you $5 on any order & can be used on top of any online sales.
Terra Firma: LUSK5 saves 5% on any online sales
Tooth of the Arrow: LUSK19 saves 10%
Toulou Broadheads: LUSK10 saves 10%
TRIFECTA: LUSK10 saves 10% on any order.
VPA: LUSK10 saves 10%
ZEUS & HERA Broadheads (New Era Archery): LUSKFIVE saves $5/pack

Пікірлер: 45

@cosmogervasi4496 2 ай бұрын

You're gonna make me sell off all my mechanical Broadheads with these tests ... 😉🤣👍

@justinjones2882 Ай бұрын

Check out his Sevr reviews

@hunterdan2002 Ай бұрын

@@justinjones2882I bought and used sevrs based off his reviews and wasn't thrilled with their performance. Going back to swats this season.

@LuskArcheryAdventures Ай бұрын

Yeah, they have their limitations. Everything is a trade-off in Broadhead design. You get excellent flight and a big cut, but often lose durability. However, there are some that are incredibly durable as well, especially the Sevrs. Check out my test of those. I’ve shot them through steel plate five times and I’ve shot one through a dried elk scapula, including the thickest part, 12 times.

@upatree10 Ай бұрын

Best broadhead testing out there! Keep up the great work. I’m now shooting the Sevrs, based on your testing.

@LuskArcheryAdventures Ай бұрын

Thank you so much. I really appreciate the support.

@wcwcgarner2717 Ай бұрын

Thank you John for all the great broadhead testing

@LuskArcheryAdventures Ай бұрын

Thank you for the encouragement!

@greekmaster1001 Ай бұрын

As always excellent test

@LuskArcheryAdventures Ай бұрын

Thank you! I really appreciate it.

@stacyhardin611 Ай бұрын

Nothing better than the SEVR!,,

@LuskArcheryAdventures Ай бұрын

Yep. Check out their new 1.5 Hybrid. Just released now.

@CEMuhlbeier Ай бұрын

Hey John thanks for the test! FYI those holes for the blades to lock into dimples like a NAP spitfire. Honesty, if they did these with a band they'd be way better

@LuskArcheryAdventures Ай бұрын

Thanks for sharing that. I wondered if that was the case. Yeah, bands can be a problem, but they are often more reliable than other mechanisms.

@sthompson447 Ай бұрын

Holy cow that seems like a great broadhead!

@LuskArcheryAdventures Ай бұрын

Yep, it did well.

@HSeaward3 Ай бұрын

Great content. Please do a review of the new Ozcut Kreature!

@LuskArcheryAdventures Ай бұрын

I've begun working on it.

@True_flight777 Ай бұрын

Definitely a flaw with that little hole on the blades thanks for a great review ✅🏹💪🏾🤙🎯

@LuskArcheryAdventures Ай бұрын

Yeah, not my fave.

@KountryfriedOutdoorProductions Ай бұрын

Thanks for all you do! Can you test the new SEVR 1.5 Hybrid? I don’t think there will be a problem, but would like to see it go through your test protocols!

@LuskArcheryAdventures Ай бұрын

I just did. It just posted at 11am CST on the day it was released, Monday, June 24.

@KountryfriedOutdoorProductions Ай бұрын

@@LuskArcheryAdventures Good deal John! Can’t wait to watch it. Been shooting a mixed quiver of IW SB 150’s and SEVR Robustos for a couple seasons now. Love both heads!

@frankbrowning328 Ай бұрын

Looks just like the Grim Reaper Fatal Steel of several years ago. For the tests against the cinderblock I would anchor down a good sized tarp to catch all the shrapnel of broken blades especially if you have kids or grandkids over to the yard. Sometimes the blades don't have a lot of carbon in them and don't pick up all that easy with a magnet. This will save you a little time and be safer

@LuskArcheryAdventures Ай бұрын

Thank you for sharing that. I have considered doing something like that. But we don’t have any pets and rarely have anybody over. However, I did just had my first grandson last month. Ha ha. That was awesome. But they live in Colorado. I may arrange something like that in the future.

@therealdilloutdoors616 Ай бұрын

I believe the hole is designed as a failure point so the broadhead will continue to penetrate if you hit unbreakable bone such as a humerus

@LuskArcheryAdventures Ай бұрын

Interesting thought. I can’t say that is a very good idea, but it does seem to work that way.

@hunterdan2002 Ай бұрын

Why does it look like it spins better after it hit the concrete?

@LuskArcheryAdventures Ай бұрын

I thought that was weird as well. Sometimes the spin is due to a lack of tightness in certain areas. When heads don’t spin well I tighten them onto the arrow and then loosen them and tighten them and loosen them over and over and over. That often clears up the issue. But this one took a shot into concrete to get to spin well. Ha ha.

@sarcazmo 2 ай бұрын

Thanks John! Where do we send broadheads to test?

@LuskArcheryAdventures Ай бұрын

Thank you for the encouragement! My address is 2502, Sun Grove Road, Melissa TX 75454, United States

@hunthealthy1018 2 ай бұрын

I'm guessing those holes on the blade have something to do with the tiny screws. Like maybe they can be screwed in and turn the head into a practice head?

@CEMuhlbeier Ай бұрын

What it is the blade retention. The blades are held in just like a NAP Spitfire. There is a small metal peice with a dimple on it. The dimple holds the blade in place

@hunthealthy1018 Ай бұрын

@@CEMuhlbeier Oh okay

@LuskArcheryAdventures Ай бұрын

It may be part of the blade retention.

@setharter Ай бұрын

Not too bad for what they are.

@LuskArcheryAdventures Ай бұрын

Yep

@littlewoody5539 Ай бұрын

I don’t know what to say 89 really !

@LuskArcheryAdventures Ай бұрын

I was really surprised by how well it performed.

@NMGagne Ай бұрын

Looks like grim reaper ripoffs minus the quality.

@LuskArcheryAdventures Ай бұрын

Well, Grim reaper did not invent the over the top deploying three blade mechanical. There are others that came before them. This one is different from the Grim reaper in the blade deployment area as well. Grim reaper uses a retention cup and springs inside. It’s much more intricate than this one.