TSDZ8 500W/750W Conversion Kit with Torque sensor integrated

Рет қаралды 9,210

Жыл бұрын

The new TSDZ8 motor of 500w/750w is coming, which is the upgraded version of TSDZ2B 250w with new appearence. The kit helps to covert your bike to an e-bike with max 500w/750w motor(Max torque:100Nm) and integrated torque sensor, which will bring you in-one riding experience from you and your e-bike since the motor outputs according to your pedaling force.

Пікірлер: 40

@Customercf Жыл бұрын

You should make one with more reliable axle

@henrique14211 Жыл бұрын

Agreed 💯 Even because we would have more options for pedals, or even buy the motor without them and use or current ones.

@nc3826 Жыл бұрын

Good luck getting any other torque sensing mid drive, for anywhere close to its price... Plus it should be very reliable..... since it uses a spindle not an axle...

@kevinshort3943 Жыл бұрын

@@nc3826 Spindle is just another word of Axle, so yes it does use an axle.................... Let's hope this one doesn't have a slot with square corners cut in it, that's going to attract all the stress forces and snap.

@kevinshort3943 Жыл бұрын

@@nc3826 What are you on about? A spindle is an Axle, an axel is a spindle - they are the same thing!! Normally the word spindle is associated with sewing or knitting rather than transport. Look up the Comet airliner (sorry links are blocked) - it's fuselage failed catastrophically due to the sharp corners on the windows "attracting" all the stress forces caused in decompression and compression. "KZfaq experts SMH" Try looking in the mirror

@kevinshort3943 Жыл бұрын

@@nc3826 "words have different meaning, based on their contacts..... " Context, and yes they do. Spindel is still a synonym for axel. i.e: they the the same thing. "stresses do not attract anything" If you are being technical, you are correct. "The shape of a mating surface is relevant, but that's not a form of attraction..." The shape can focus or spread the forces, and it's not limited to mating surfaces. "That was just a myth that's disproved....." Citation or you are making it up. It was metal fatigue, accelerated by the shape of the windows. "And I only have an undergraduate degree in engineering...... So what do I know????" I don't believe that for a moment, and apparently nothing.

@remziakyuz 4 ай бұрын

Hi, Its look likes very nice. Do you have a 1000w mid drive kit with torque sensor? If yes, can you share links of specs and online store? Thanks.

@lokz9632 9 ай бұрын

Who sells these motors? I cannot find any info besides on PSWpower, and they are out of stock

@Dimitris_Papadiotis. 3 ай бұрын

I have the tsdz2 with the vlcd6 display and after 4 years of problem-free intensive use, the error code E03 appeared on the screen. It doesn't work anymore. Does anyone know what this code could mean?

@lokz9632 9 ай бұрын

I want to buy this motor, 750W version but there are nowhere to be found for purchase. PSWpower is the only store i found, and they do not have any in EU stock.

@strawhatpirateOPC 8 ай бұрын

I'm a supplier from China. Ready stock

@lokz9632 8 ай бұрын

@@strawhatpirateOPC Link to a website or store?

@pxl666 Жыл бұрын

will this be sold by pswpower in eu ?

@mib7455 Жыл бұрын

Yes as TOSEVEN

@pxl666 Жыл бұрын

@@mib7455 but toseven are different motors

@kevinshort3943 Жыл бұрын

@@mib7455 Apparently the To7 is a "different" motor from a different company, made in a diffrent factory.

@kevinshort3943 Жыл бұрын

Confused. There is already a 2b, and it doesn't look like this , it looks like the 2. Hope this has force weaking, so you can hit high cadence. If so, I may very well buy one (depending on price, and no stupid battery restrictions) PS Why are you using a square tapered axle still?

@nc3826 Жыл бұрын

Number one: There are posts on what parts have been updated... That's why it was updated ... Number two: The firmware can be flashed, to change parameters... Number three: square tapered spindles is a tried and true form factor.... Changing would be costly and pointless for most users....

@kevinshort3943 Жыл бұрын

@@nc3826 "Number one: There are posts on what parts have been updated... And why they were updated ." Is there? Where please? I haven't seen anything on endless sphere. "Number two: The firmware can be flashed, to change parameters..." So it has the same controller as the 2 ? "Number three: square tapered spindles is a tried and true form factor.... Changing would be costly and pointless for most users...." ISIS is a tried and tested form factor, without the problems of square taper, and a better choice of crank arms.

@nc3826 Жыл бұрын

@@kevinshort3943 Nope.... That more costly spindle is not utilized, as part of the upgrade..... So the rest of your inquiries are mute.... Have a nice day, being obtuse about the additional cost...

@kevinshort3943 Жыл бұрын

@@nc3826 What are you on about this time? What additional cost? What spindle? It's not a sewing machine. I am guessing you are just making stuff up, as you can't provide the technical information you claim is available :( I think you haven't even watched the video, and think it's about the 2b, that's been out for a year. This is a new motor, that isn't available yet.

@nc3826 Жыл бұрын

@@kevinshort3943 what's up with your fixation with sewing machines???? U convinced me, we just have to replace sewing machines for bicycles, the other way around??? Good luck with your meds and have a nice day.....

@ukrytykrytyk8477 Жыл бұрын

When is it going to be available?

@lokz9632 9 ай бұрын

I wait for that information too. It can be ordered from PSWpower, but ony from China at this moment. No info when it will be available in the EU or what the price will be. They really need to work on communication with the customers.

@strawhatpirateOPC 8 ай бұрын

Spot this channel

@aflarry 7 ай бұрын

Will this take 48v or 52v or either?