How to install LED Flushmounts on 06-16 Yamaha YZF R6 by TST Industries

Рет қаралды 22,949

TSTindustries

Күн бұрын

Пікірлер: 35

@HugoGSamuraiHg 9 жыл бұрын

Nicely done it looks pretty cool

@TSTindustries 9 жыл бұрын

Thanks! *****

@ddkeats85 9 жыл бұрын

Well, I ordered the hotbodies flush mount turn signal last week :( looks like i'll be selling them again and ordering the TST Industries ones :) looks so much better and the plug and play harness is the way to go.

@TSTindustries 9 жыл бұрын

Thanks! We try and make it as easy and seamless as possible.

@Zub19zero87 8 жыл бұрын

does the TST FLASHER RELAY work the same for Yamaha r6 and is the installation online?? TIA

@CjSalvador 3 жыл бұрын

Will this work on the newer models???

@jaysonnuera7293 8 жыл бұрын

Hi there i was just wondering if you could just install in running lights mode coz mine wen i bought it is the left side is on running light mode n the right side is off just to be balance what is ideal ON runinglight or Off? thnx nice vid very helpfull

@TSTindustries 8 жыл бұрын

the ideal setup is running light off if you are using a single circuit signals

@deathbeam1238 8 жыл бұрын

just order mine about a few minutes ago for my new 2015 Raven R6

@TSTindustries 8 жыл бұрын

+Brian 1997 Please let us know how your installation went once you get it all done.

@deathbeam1238 8 жыл бұрын

+TSTindustries I love it got to order the fender eliminator now, discount lol!

@spainmarc17 8 жыл бұрын

i bought the hyperpack with this and installed it today but i heard something popped when i was testing the harness wires. what could be the problem because my taillight, turn signals (front, back, dash) license plate light isnt working. thanks

@TSTindustries 8 жыл бұрын

Sounds like you popped a fuse. Replace the appropriate fuse and make sure that wires do not touch each other on the harness converters during further testing.

@renator.5658 7 жыл бұрын

Do you need the flasher relay when you put these on?

@TSTindustries 7 жыл бұрын

An LED Flasher Relay is not required for these signals to work but we do recommend installing one if you would like to slow your signal flash rate down to the OEM speed. You can check out our Tech Tip video below for more information about our relays: kzfaq.info/get/bejne/a9qchMmYxKfUaH0.html

@ranodom3502 9 жыл бұрын

So I recently bought a whole bunch of parts from TST industry. So today I had some time to put them on, but here's the problem I'm having with the flush mount turn signals for the front of the bike. On the cluster when the bike is running both arrows are lit up little bit that you can notice it but when bike is off and left "ON" in the on position the arrows are gone. Can anyone help or did just wire them wrong?

@TSTindustries 9 жыл бұрын

Mrrhanson Did you wire them in as running lights or turn signals. Sounds like one or both might have been wired in with the running light wire. Also, did you wire in our relay or resistors?

@ranodom3502 9 жыл бұрын

I bought the relay, didn't use any resistors. I did yellow to black, like the video. I'll have to double check my work again this weekend to see if I wired they wrong. Appreciate the reply from you guys, thanks.

@jaysonnuera7293 8 жыл бұрын

so just pair the wiring so the dlr is off on both side alright thnx alot

@TSTindustries 8 жыл бұрын

that is correct

@PushinP901 9 жыл бұрын

Even tho the running wire isn't plugged in will they still turn on as a running light or just signals?

@TSTindustries 9 жыл бұрын

Just the signal function. These flushmounts do not have a running light circuit.

@neuroplasticity 3 жыл бұрын

@@TSTindustries Is there one with the running light circut? Ty

@TSTindustries 3 жыл бұрын

@@neuroplasticity our Halo-GTR signals have running light function. They also come pre-fitted with oem connectors so mounting is a snap.

@maikyv2s960 6 жыл бұрын

r6 2005?

@TSTindustries 6 жыл бұрын

These signals do fit the 2003-2006 R6 model

@Jc-vu5gs Жыл бұрын

How do you call the first plastics that you took off..I been trying to find some for my 2012 r6 thanks. Anyone appreciate

@TSTindustries Жыл бұрын

Take a look through parts fiche on mrcycles.com . You can identify your parts visually, correlate them to part numbers, and get them ordered right in one place

@spainmarc17 8 жыл бұрын

@Jetslam9 8 жыл бұрын

+spainmarc17 the same exact thing just happened to me… what was the problem and how did you fix it???

@Zaki2K94 8 жыл бұрын

+Ernest Hodge Check bulbs guys, and let me know.

@Jetslam9 8 жыл бұрын

+zaki94pl yeah I figured it out I blew the fuse for the lights. It was a simple fix

@Zaki2K94 8 жыл бұрын

+Ernest Hodge Next time always connect first ground. Cheeeers :)

@deathbeam1238 8 жыл бұрын

+Ernest Hodge how you fix it? just happen to me?