A Wewd from the dewd? This is certaintly gewd 😍

Oioioioi the wewd-dewd this is gewd, yeye

Dude

Bobby dukes pulsejet sculpture?

@@integza CREATE A WATER GET TO CUT UP LORD TOMATO AND HIS BODY GUARDS

Som Tanton

Lmao love your vids

Hahahahahaha

Tom I made ur trebuchet videos in wood all by myself, ur work is so inspiring thank you a lot

Wassup tom hehe

So delicious that you’d die for it

I think you have some problems.

Bruh

I wouldn't have expected a different response from you

I wonder how it tastes like

I was gonna say, last I checked turbochargers are driven by exhaust pressure.

@The Cone Boy No Alex is right, there is no turbo here. only a electric driven Centrifugal Compressor. ProCharger is a Brand that (among many other things) makes belt driven and crank driven gear ratio increased Compressors (Superchargers) a "Turbo" or "Turbocharger" is a Turbine powered Centrifugal Compressor (Centrifugal Supercharger). Turbines can be driven by Water, Air or other gasses.. in this case the extremely hot exhaust gasses from an engine. the gasses spin up the Turbine which is connected by a common shaft to the Centrifugal Compressor which forces more air into your engine intake. When this is tuned with the proper addition of fuel this in turn helps you obtain greater combustion forces. but long story short... this is a Centrifugal Compressor (supercharger) not a turbo.

@The Cone Boy that is what a centrifugal supercharger is procharger just a brand

@@Idontrunntoofast A belt driven turbo is a (edit: centrifugal) supercharger, and belt driven turbos are commonly known as prochargers. So he is actually kinda right.

@@thomasbengl6081 No, he is absolutly Wrong and now you are as well, You are confused about turbos and what they are. The word turbo is just short for turbosupercharger which infact is just a Turbine Driven Supercharger. The supercharger part of this system happens to be a Centrifugal Supercharger, but if you were able to use that same turbine to drive a roots or screw type positive displacement supercharger you know what you would have? You would Still have a Turbosupercharger, otherwise known as just a "Turbo" Again I covered all this in my previous comment that you replied to but you must not have read it.. so I am going to go over it again but this time simple enough that anyone can follow. A BELT DRIVEN TURBO DOES NOT EXIST. BECAUSE THE TURBINE, THE VERY THING THAT MAKES A "TURBO" A "TURBO" ISNT USED. Again what you are thinking of is a Belt Driven Centrifugal Supercharger. (IT IS NOT A TURBO) Additionally they are not "othewise known as Prochargers" procharger is just a brand that makes Centrifugal Superchargers.. they are just one brand, they arent the most common, they dont sell the most, they havent been around the longest they arent even the most well known. Tell me have you ever heard of Paxton / Vortech? Paxton is the original centrifugal supercharger company, they have been building them for almost 90 years. They have many OEM customers. They literally outsell Procharger by millions of units. Know how long procharger has been around? Less than thirty years. They are just making a name for themselves, they are a great company and they sell a very high quality product. But the name is nowhere as recognizable in the field as Vortech / Paxton. So just to reiterate, 1. A "Turbo" is a turbine driven supercharger. 2. There is no such thing as a belt driven "Turbo" 3. Belt driven centrifugal superchargers are not "commonly known as prochargers" following that logic they would be more accuratly called "Vortechs" or "Paxtons"

It’s more like an electric turbo.. because that’s what it is lol

Well, nothing less is expected of the great EDF. They also have great songs. kzfaq.info/get/bejne/mbideLZnrrDPj6M.html

@@Cudgeon wat is that

नहीं।

@@Cudgeon I did not expect that but I am so glad it's here

HAHAHA

No he turned it in a rotary

Ahh I see, "THE JAPANESE Car CULTURE HAS JOINED THE CHAT".

@@v1lhc467 oooh so thtas how it ended it my recommendeds

@@v1lhc467 yup, say him make a rotary engine before this and immediately thought of an Rx7

Why not use two twin turbo

hello, we are asking for your help as your language is not our main language. We will do a similar project in our own school, but we are having problems with fuel transfer and fuel type. How can we solve this problem?

it's supposed to do that, thats what makes the thrust if your talking about it shooting flames out of it

@@iivo2347 nah , flames , but not like a flame thrower , just like he said towards the end later when the engine kept blowing a cap off and loosing pressure , you end up with a bad flamethrower ,no where near enough pressure

Thank you Jay 😁

use timestamps and make KZfaq great again

17:10

Kinda yeah

@@Bortalis4053 thx!

Have you seen Gamestop's stock chart?

Stock chart only scary for the hedge fund shots 🤭 📈

@@markarut9 not exactly, I mean a more realistic one, like in some science museums, with an exhaust fan at the top, not an open-top one

Already done i believe

@@nikkofpv2902 a realistic one? Not the ones with spinning walls.

@@04karit0 all tornado machines need air flow.... to not have spinning walls or fans you would need 1 fan on top of a chamber as a suction point. The chamber walls would need to be gapped at the corners so incoming air all flows in the same direction creating a vortex cone air flow system and a way to not burn the fan on top. Fire source can't be controlled it must be a free flow fire . Meaning no torches or air gas. Must be a liquid fire or a solid (wood) fire

​@@nikkofpv2902 yep, you are absolutely right, I was talking about the ones with an exhaust fan at the top(and an air supply one at the bottom, near a fogger), as I mentioned in a previous comment. And it actually takes care of creating a low pressure area at the top and introduces a spin to the system. And since the rpm can be controlled, it's adjustable to create more realistic tornadoes. Now the problem of fire damaging the exhaust fan can be solved by replacing the fan at the top with a metal(or printed with ceramic filament?) tube. With fan being safely located at the other end of it. This will create a strong suction but will not introduce any rotation to the system. But we still have a bottom pump that pumps air into the system, so we can simply place it tangentially, so the air has some initial velocity. I am actually quite curious what will happen if you have both, water mist and propane fire there. It will take some time for these fog droplets to evaporate, so we could see some cool visual effect.

I follow the gregs airplanes and automobiles school on this. A car turbo is just an exhaust driven turbo supercharger.

@@ravener96 a turbocharger and turbo supercharger is exactly the same thing just the name got simplified. An even longer name would be a turbine driven supercharger. There is no turbine in Integzas design so Captain Tim is right.

@@Hamring I was about to make an angry awnsering comment, but then i googled the definition of a turbine and realized, that its only a fan being powerd by fluids moving through it, and not the other way around. I learned something, and id like to thank you for that.

@@florentinaldenhovel7790 What a rare and excellent comment section interaction! I'm glad i could inadvertently influence you to teach yourself something, and honest of you to admit to this series of events!

@@ravener96 Greg kept bringing up electrically driven superchargers and I think this is a prime example

3D print your own weapons grade plutonium from illegally imported Iranian nuclear waste (300k sub special)

*FBI! OPEN UP!*

*TURBO LS* swapped

@Nathaniel Miller The big difference between the LS and new LT engines is direct injection. The LT5 is supercharged.

Ls Engines here on Portugal are kinda rare and expencive because GM dosent sell them here you have to import them

LS swap the world!

I love this ☠️

They used to sell kits to turn an automotive turbo into a basic jet engine. He is slowly working his way there.

In the Others Hand, a turbocharger from a Car might make for a great turbojet engine.

underrated comment

Or ask him if he could build one out of metal with a car Turbocharger 😉

Why do that if he can just roast them with that 😂

@@tichifrancetich8713 you can do both

@@lore1786 now it's starting to sound like a tomato soup recipe.

@@zeanyt2372 hahah true

Riveted and brazed brass would probably be enough, and a lot easier for much of the engine. Maybe a an old propane bottle for the combustion chamber.

@@Azzysdesignworks Brass would be more practical, but titanium would be even less practical than cast iron. But way, way cooler! (metaphorically speaking) In all seriousness though, I think aluminum would be a better choice than brass. The melting point is lower, but thermal conductivity, reflectivity and cost is better, and the workability is decently close. Aluminized steel would give you some of the benefits at even lower cost, but it's only commonly available for automotive exhaust and stove piping. That said, I think anything other than stainless steel would be more trouble than what it's worth. It can handle the heat and corrosion without worry, and it's not impossible to deal with. I do think aluminum would really work, but then cooling and thermal design becomes absolutely essential to keep the thing from melting over a descent run. If only asbestos didn't cause cancer. Now that would be helpful.

no , its better to test a firing engine in a wooden surrounding

And also, make sure you don't wear safety goggles. Safety goggles are for pussies...

Jason u weird

Can you imagine his neighbors wondering what in the heck he's up to when they hear all the noise coming from his attic?

@@nunyabidniz2868 probably "damn thats a weird 'passionate' noise"

Worlds most disgusting engine.

Captured portueguese engineer working on the proyect V1

Well yeah, someone has to take em off the market, i mean think of all the children forced to eat that junk

I föökin love tomatoes

Fite me

lol love it!!!

aka Colin Furze? kzfaq.info/get/bejne/mLF4rZqotNDGaas.html

@@whiskeyandsarcasm I don't think Integza lives in a place with long, straight, low-populated tracks like Colin.

that's electric supercharger, not a turbo

I don't speak a word of Portuguese but I can tell you are right.

You are correct according to google

Supercharger centrifuge instead of a turbo? Everyone says you're right (and I believe you/them) but what's the difference exactly? Thanks!

@@cheaterman49 centrifugal supercharger is spun by a belt/gear. A turbosuoercharger (or turbocharger) is spun by exhaust gasses going through a turbine coupled to the compressor. Hope it helps!

@@atomic4440 Aaaaaah! So in this case, the fact that his supercharger is spun by a separate motor is the "issue"? In a normal turbocharger, he'd use the pressure from his exhaust to spin the turbine that compresses intake air? Thanks a lot :-)

I think this should decreese you gás Flow becouse the gás inside the bottle is already compresed, sealing the tube you will be increasing the pressure turning harder tô the gás escape.

That's is smart, although I think he has already too much fuel judging by the flame formed outside of the motor. I don't really know how it should be. Can you think of a way to find and maintain the correct air fuel ratio?

It will blow up

Colin Furze 2.0 basically, he would build a pulsejet engine every week lol

He's trying to cut weight because weight is one of the biggest obstacles of space travel

@@FoxxFire91 lack of air is also a big obstacle for pulse jets in space

@@FoxxFire91 Good luck getting to space with an AIR breathing engine.

@@jeffvader811 Or you can use this turbocharger on a ceramic vortex rocket engine to add more fuel an oxidizer to make it more powerful. Using a pulse engine to test if it work at all is more cost effective than just jumping to the self oxidizing system Incase it doesn't work. Its sad that an uneducated hillbilly highschool dropout can think of that an yall cant

Te quiero perro , your a fucking genius

or maybe make a turbojet engine drive the gears?

@@gunnarbechTV no just no

Sounds cool to me, I say this one!

@@nicholas2113 haha, I'm kinda a geek 🤓😅

and of course no safety glasses homie is going to end up wearing a pirate eyepatch

@@0x73V14 and no ear protection. Pulse jets are LOUD.

Can we take a moment yo appreciate how he is testing turbocharged jet engine in his attic...

@@halogeek6 thats made out of wood

@@whatilearnttoday5295 yeah in the video he was completely inaudible over the pulsejet despite yelling and having the mic next to his mouth. These are LOUD

I was looking for this comment! PPE please!

he probably need to protect his long(edit lung)too.. with all that smoke! security feel stupid , but it get you when you get older and that sucks

@@sy5tem his long hwat?

@@tiftik I think @sy5tem means 'lung'

@@tiftik not hwat, his long TOO.

idk why you are the only person suggesting it

So a tomato launcher then ;)

I always wanted to see one of those on a circular track with an arm that goes to the middle of the circle and a generator. Could you make free power with magnets.

@@mikewhite4464 you think about superconductors installed like a ferry wheel inside of his own track connected to a generator? Nice idea

Yeah would be cool. Wish I had the tools and knowledge to make it! And if it worked Shell would kill me.

@@mikewhite4464 haha don't bother you need to cool superconductors down to their critical temperature for some it is −269 °C Shell will sell you tons of fule to run something that extracts liquid Helium. Because that is needed to let the conductors work. And there is your energy sink. There is no perpetuum mobile sorry...

I just said the same thing!!

@@coleroske9968 Great minds think alike! control systems are awesome!

To be fair, a servo tester can only be used for testing servos, while an Arduino and potentiometer could do any number of things.

Cute catgirls in anime compilation???? God damn thats horrible. KZfaq probably felt bad for you and recommended a good video instead

@@SlapHappy lol

@@SlapHappy what's wrong with cat girls? There thr only reason to live...

@@halogeek6 bro insted of cat girls get your self a real girl

@@rust_player5675 lol no real girls want me

kzfaq.info/get/bejne/gJeklbWfr9u4qac.html

Unper pressure. You know like Über pressure... but Ünper.

I hope he doesn't make that stache a rectangle