Рет қаралды 28,944
In this video, we show you how to prep, paint, and bury stripes on a steel aftermarket hood for a 72 Chevelle. If you are just starting out and are thinking of getting into the auto body painting game, my advice is to take a leap and make an investment in a GOOD spray gun set. A cheaper one will get the job done, but you will encounter more issues and have some troubleshooting on the back end to correct. The same holds true for your paints. We are using Diamont Basecoat in this video. All that being said, I will list the products I've used below, in case you're curious, or looking to acquire your own. Thanks for watching!
Basecoat Spraygun
amzn.to/39XtVBf
Clearcoat Spraygun
amzn.to/2v9E6UE
Primer Spraygun (not shown in video)
amzn.to/2VfXji7
Tack Rags
amzn.to/2vZWTBI
Respirator
amzn.to/3c09ntL
Nitrile Gloves
amzn.to/2Vh5v1q
Rubbing Alcohol
amzn.to/3a02FlS
3M Masking Tapes
3/4”
amzn.to/39WMEgd
2”
amzn.to/2PkXIvM
Microfiber Cloths
amzn.to/2v9vLjP
Seamstress' Soft Tape Measure
amzn.to/2VhprS8
Tape Measure
amzn.to/2PjawTI
Blow Gun
amzn.to/3c7rcr5
These are affiliate links. Clicking on them and even purchasing from them doesn't cost you anything, but I may earn a commission.