Welcome to Apollo Quick Tips Episode 3 In this video we'll use the Unison Fender 55 Tweed Plugin IN STEREO as well as compare Unison vs non-Unison. #uadforums #studionu #apolloquicktips #matthepworth #matthepworthrecording
Пікірлер: 59
@Tomtamo12 жыл бұрын
I had no idea you could leave a plugin in the Unison slot to get the impedance benefits, but not enable the plugin. Great stuff Matt!!!!
@MattHepworth2 жыл бұрын
Thank you, Tom!
@bigrivermedia7622 жыл бұрын
Thanks for these awesome stereo guitar tips Matt!
@MattHepworth2 жыл бұрын
Thank you! I feel like it's an underused capability Apollo has. I also just posted a poll on the Community tab. Cast your content vote, if you'd like! Thanks again!
@russellsherman93582 жыл бұрын
Wow. I would never ever have had any idea about this technique. Thanks 🎸🎸
@MattHepworth2 жыл бұрын
Thanks! Glad it was helpful!
@mikeschroder14772 жыл бұрын
This is really useful. Thank you!
@MattHepworth2 жыл бұрын
Thank you very much!
@guilhem-valaye Жыл бұрын
WOOOOOO massive thank you Matt !!!
@MattHepworth Жыл бұрын
Thank you! Glad it was helpful!
@GenilsonOficial9 ай бұрын
UAD should give you all the plugins as a gift after this one!
@MattHepworth9 ай бұрын
Hahaha, thank you!
@bobbysbackingtracks Жыл бұрын
Liked and subbed Thanks Matt!
@MattHepworth Жыл бұрын
Thanks so much!
@slimyelow Жыл бұрын
OMG. Why can't I travel back in time (when unison was introduced) so that I may rewind the countless hours and sleepless nights wasted attempting to solve this problem. Not to mention the heated arguments I had with UA customer support. - thanks a trillion for this Matt, you Rock ! !
@MattHepworth Жыл бұрын
Hahaha! Thank you!
@10CEAN5 ай бұрын
CRAZY THX U
@michaelhurwitz564 ай бұрын
Great tip Matt! Thanks. Question, why add the sample delay to the stereo track, doesn't Pro Tools do the delay compensation?
@MattHepworth4 ай бұрын
Thanks! Apollo's driver does not compensate for the auxes, actually.
@srwaite72 жыл бұрын
Hey Matt! Good stuff! How would you do this in Luna?
@MattHepworth2 жыл бұрын
So far it's not quite possible in LUNA with the way auxes are handled. You can leave it active for tracking, but you have to bounce it to print it.
@willnova1234 Жыл бұрын
For the looper; are you using a di box or running guitar-looper-interface? Thank you! Awesome video
@MattHepworth Жыл бұрын
Thank you! I was running a BOSS looper pedal.
@MattHepworth Жыл бұрын
Then into the HiZ on Apollo.
@willnova1234 Жыл бұрын
@@MattHepworth Thanks!! So nothing between the looper and your interface? Really awesomely done
@MattHepworth Жыл бұрын
Yep. Just raw guitar into the looper and out to the HiZ on Apollo.
@willnova1234 Жыл бұрын
@@MattHepworth thank you very much :)) Appreciate you
@yuanwang57632 ай бұрын
Hi Matt, just focusing on the volume level, is the unison increasing your guitar signal by 6 db compared to the hi-z minimum of 10db?
@MattHepworth2 ай бұрын
A great question. Unfortunately, I cannot remember!
@glenn73502 жыл бұрын
Will this have any effect when I have a outboard reverb in a stereo track in console? And if so should I send both the dry signal and the aux signal to my stereo reverb track? Thanks 🙏🏻
@MattHepworth2 жыл бұрын
Great questions! Make sure your outboard reverb is set 100% wet and only feed it from the aux. Return that outboard reverb to a linked pair of channels in Console and use the channel faders to blend to taste. Thanks!
@glenn73502 жыл бұрын
@@MattHepworth Thanks that’s almost what I did, but I also sent my DI to the stereo reverb track. As I wrote in another post here I can’t mute my DI track with cutting the signal to my aux. Not sure how you did this. Thanks for your help:)
@bobbysbackingtracks Жыл бұрын
@@glenn7350 yeah i run into the same prob. I would just love to record (print) a Unison or Inserted track and also a clean DI at the same time.
@MattHepworth Жыл бұрын
Unison will always print, so you'd need to utilize a separate DI and another input to do what you want with Unison, however, you can easily print an insert AND keep the dry DI. Check out my short 5 Apollo Tips video for how.
@bobbysbackingtracks Жыл бұрын
Hi Matt, When you printed to PT I noticed you did not engage the UAD REC button in Consol and left it on UAD MON...Is that correct?
@MattHepworth Жыл бұрын
It is if you want to keep the dry/DI track, but doesn't matter if you're just recording the stereo aux.
@MattHepworth Жыл бұрын
Oh, and keep in mind Unison always prints, so anything in the Unison slot disregards Rec/Mon.
@bobbysbackingtracks Жыл бұрын
@@MattHepworth Thank you Matt. What is the easiest way to record a clean DI while printing an effected insert or Unison signal?
@MattHepworth Жыл бұрын
I do Mon and record the channel plus Aux. Check out my Record Wet & Dry 2023 video for a bit more detail. Many thanks!
@francescoprevitera57813 ай бұрын
Just something strange happening in my console .. if I mute the DI Input there is no signal sent to AUX 2 ... can you guess what is reason ?? thanks for your valuable work
@MattHepworth3 ай бұрын
I'm not sure what happened in the video - I think it was working as Pre even though it was set to Post on the Aux. Pre is what you will need.
@martinearnshaw Жыл бұрын
Thanks Matt works great in console but I cannot record in Luna. Is there a trick to this as I set input to Aux 1 L and Aux 1 R but there is no signal.
@MattHepworth Жыл бұрын
Unfortunately, there's not currently a way to use Auxes with LUNA like this. If I can think of a workaround I'll let you know.
@martinearnshaw Жыл бұрын
@@MattHepworth Thank you
@michaelpreston76544 ай бұрын
How are you able to mute channel one and get your auxiliary to get a signal when set to post?
@MattHepworth4 ай бұрын
I'll need to go back and rethink that. The Unison plugin simply adds the impedance. Was it a fluke that it worked in Post...? I think it passes through if you're using this trick anyway, but I need to go back and confirm. It's been too long, sorry.
@michaelpreston76544 ай бұрын
Thanks. Let me know if there is some special configuration I am missing out on! @@MattHepworth
@carlmeanwell91802 ай бұрын
Is there a way of doing this in Luna without console?
@MattHepworth2 ай бұрын
I can't think of a way off the top of my head. *Maybe* just using a bus.
@rotemshoshani4242 жыл бұрын
See, that's the one thing I don't understand with UA, so many capabilities, so little documentation, for such an expensive product, I'd really wish they had this enormous KB with advanced search because realy, I get things better from reading
@MattHepworth2 жыл бұрын
I believe you can find a brief mention in their support docs, but I thought it deserved to be highlighted.
@glenn73502 жыл бұрын
I followed this step by step, but when I mute my DI track in console it cuts the signal to my aux. The only way I get this to work is to unmute my DI track. What have I done wrong?
@MattHepworth2 жыл бұрын
Sounds like your aux is set to Post instead of Pre.
@glenn73502 жыл бұрын
@@MattHepworth That’s it! Thank you so much🙏🏻
@MattHepworth2 жыл бұрын
You're welcome!
@glenn73502 жыл бұрын
One last question sir. Do I put compressor and pultech eq plugins on the DI track or the aux track?
@MattHepworth2 жыл бұрын
I'd put them after the Fender on the aux, unless you wanted to use them more like pedals. If the latter, put them before the Fender, but still on the aux.