Ultimate Dana 30! Steering, Brakes and Axle Shafts!

Ultimate Dana 30! Steering, Brakes and Axle Shafts! - Episode 3

Рет қаралды 241,544

4 жыл бұрын

It's time to finish our Ultimate Dana 30 build! If you missed the 2nd episode it was on the Muddy Beards 4x4 KZfaq channel. Episode 1 and 3 (this video) are available on our channel.
In this episode we button up our breaks, steering, track bar, and install our 30 spline RCV axle shafts. Our WJ knuckles, rotors and calipers are from a 2001 Jeep Grand Cherokee. We chose the smaller (teaves) calipers due to my brothers 15" rim. The 2003 Grand Cherokee calipers are larger and will need a 16" rim or a larger offset.
Sorry the trail time was short in this video, I had to cut it down for time but I will make it up to you in a future video. Check out our Amazon link for many of the parts we used in this build!
AMAZON ITEMS!!! www.amazon.com/shop/dirtlifes...
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
ONX MAPS: webmap.onxmaps.com/account-pu...
MIDLAND RADIOS: bit.ly/2IjmlZD
STEP 22:
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutionpowertools.com/
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlifestyle.com
Support us on Patreon! / dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#ultimatedana30 #dana30 #rcv

Пікірлер: 460

@cpthillbilly 2 ай бұрын

Coming at you from the future. Your skills and channel will have grown tremendously in 5 years! Well done.

@95Z28A4 4 жыл бұрын

I ran drilled WJ rotors on a HP Dana 30 in a 1998 XJ for over 100K miles. I had no issues with cracking. I used an XJ wheel bearing as a jig to drill the WJ rotors. I dissembled the wheel bearing with a press, drilled two 5/8" holes on 5 on 5" bolt pattern and bolted to the WJ rotor with 5/8" studs. I then drilled through the XJ wheel bearing holes with a 5/8" bit to make the 5 on 4.5" bolt pattern. I saved my "jig kit" to easily drill new replacement rotors.

@fomocoloco7172 4 жыл бұрын

This is literally the best channel on KZfaq for all types of technical knowledge on 4x4 and fabrication

@DirtLifestyle 4 жыл бұрын

Thank you! I appreciate it!

@jakebmorgan696 3 ай бұрын

For real! I just started looking at building something a couple weeks ago and I'm probably 6 hours deep in content from this channel alone.

@jonaathansimons7938 4 жыл бұрын

Nate & others attempting the WJ knuckle swap: Use an '02 Ford Explorer Sport Trac rotor, correct offset and bolt pattern. Saves a step if you're buyin new rotors anyway.

@silverfang2372000 4 жыл бұрын

Jonaathan Simons Came here to say this. Glad someone else knows this as well!

@tomschuh6301 4 жыл бұрын

4WD or RWD Sport Trac? Looks like they have different numbers.

@slappygilmore5040 4 жыл бұрын

thats awesome! much better than drilling rotors

@jeepersoutpost1150 4 жыл бұрын

@@tomschuh6301 2nd this question. Got any answers yet?

@tomschuh6301 4 жыл бұрын

@@jeepersoutpost1150 Nope. I just went with WJ rotors and drilled them.

@subculturenm 4 жыл бұрын

I enjoyed the video. I get so tired of hearing people say “tons, tons, TONS!” when most of them aren’t even ‘wheeling hard enough to break stock axles.

@DirtLifestyle 4 жыл бұрын

Thanks! I have the same opinion. One tons have a time and a place but most people don't need them👍

@tylerdubois9020 3 жыл бұрын

Not only that, depending on your rig, 1 ton axles will make it harder to flex, and you will loose ground clearance because the differential housing hangs lower from the larger ring gear. Unless you are running massive tires, like 40"+, dana 30 with some truss and beefing up will do most people fine.

@p8nflnt 2 жыл бұрын

I agree, but part of the fun is building your rig. Just depends on the type of person and their priorities.

@bobbynate4271 4 жыл бұрын

This is seriously the best axle video on these Jeeps I've ever seen thank you Nate 🤘😎.

@SWBCrawler 4 жыл бұрын

I love how you just build everything you need as you need it.

@DirtLifestyle 4 жыл бұрын

Thanks brother 👍

@colt_walker Жыл бұрын

@@DirtLifestyle how is this axle holding up 2 years on?

@1unkn0wn 2 жыл бұрын

I love the content on this channel. In the last couple years it was discovered that 2002 explorer sport trac rotors fit the WJ conversion without drilling.

@littlesteve855 Жыл бұрын

When you come back form the future, the shop has changed so much!

@larryjanson4011 Жыл бұрын

love what you are doing here. on my 1984 cj-7 i had the tapers for the steering drilled from top down, bottom up on the pit-man arm. and re-tapered for 1/2 ton chevy parts. drag link is level. NO bump steer. no death wobble, runs tru down the hy. 4 1/2 in lift, 35 tires. added machined steel (NOT cast crap) tapers to put the steering back into correct castor, camber. I need to use my jeep on the street. heim joints are not legal in ca. D30 4:10.1 arb locker "supper" 30 axle shafts has larger u-joints. basically a D44 stuffed in a D30 housing. never failed me on the trail. no talk about a hydraulic brake booster? factory parts just junk the vacuum booster get 1000 times better braking. but must get a better ps pump. and this gives you a ram to help work the steering.

@fotomotoxxiii 4 жыл бұрын

In 2015 I fully built a dana 30 and Ford 8.8 and it cost a lot to do it right. I'm running 37s in a super lightweight YJ. RcV shafts were out of my price range so I opted for g2 chromoly shafts. I'm also running true trac instead of locker again to save money and keep things from breaking. I wish I trussed it but I did not.

@ProjectXJ 4 жыл бұрын

I don't have an ultimate dana 30, but I am pretty close. I have spent far less than the $4700 like the video. Here is what I have done and how much I paid: 4.10 gears and master install kit $180 lock right locker $90 Chromoly axle shafts $360 Artec truss with Johnny Joints $258 Solid diff cover $81 C-gussets $79 1 ton aluminum steering $412 Synergy Ball Joints $200 Grand Total: $1660

@brentohara9471 Ай бұрын

Thank you for a great and informative video...

@exhaustfumes927 4 жыл бұрын

The Bloomberg add at the beginning could def go away

@EvanMoon 4 жыл бұрын

So what you are saying is it’s really nice to have you as a brother because if you have to buy and get someone to build an axle it’s really expensive

@DirtLifestyle 4 жыл бұрын

Lol pretty much

@johnsmind 3 жыл бұрын

Like what you're doing. Wish I had a garage. Apartment car ports don't cut it. You have no idea how lucky you are. Good stuff guys.

@benbilling4268 4 жыл бұрын

Very good. The reasoning is sound and well explained , and I really appreciate the cost rundown. Keep up the good work.😊

@DirtLifestyle 4 жыл бұрын

Thank you!

@thecatalyst7743 3 жыл бұрын

I love how detailed you are with your videos. Good job!!!

@jasonlenihan9854 4 жыл бұрын

Doing a lot of building myself. Excellent video. Thanks from Snohomish WA.

@Joe-Mamasixtyninefourtwenty 4 жыл бұрын

You forgot one thing when adding up your costs. Time. Your time is worth money, if you are having to build the whole thing your looking at alot of hours to do everything in your series on this. Add that to the mix and your looking at well over 6thou for the dana 30. Really cool series amd love the vids! Keep em up bro 👍

@andresvalverde5069 4 жыл бұрын

Josef Berns that's a good point but the best apples to apples comparison is to not include the time price because it will be different for a lot of people.

@Whiteandsonsgarage 4 жыл бұрын

That’s the best Dana 30 I have ever seen, love the steering set up on it

@DirtLifestyle 4 жыл бұрын

Thanks man! Definitely bullet proof on my bros TJ 👍

@mr.caceres305 3 жыл бұрын

Could you run 37s on it??

@boatsandjeeps780 2 жыл бұрын

@@mr.caceres305 If you have experience wheelin then yes , just can't hit everything wide open , and gotta know when let off or go neutral when tryin obstacles that u don't make on ur 1st shot , gotta b off gas and on brakes to stop wheel spin b4 jeep comes to a stop when sliding back down , that cause most breaks that I've seen , also I been runnin 37s on stock d30 except 4.88 yukon gears and arb locker , I n very near weeks I plan on doin c gussets, truss and ball joints , and 1 ton steering, cause I feel my steering joints wearing out and I'm positive ball joints r to. We do run places like windrock and adventure offroad park, hard trails , hp d30 r stronger than people put on

@stevedavis9909 3 жыл бұрын

After watching all 3 parts of your videos. I just purchased a Dana 30 High pinion that I'm going to build for my TJ. Thank you for the videos and helping me make my mind up!

@danbemman2271 3 жыл бұрын

Always enjoy you technically information and your creative editing.

@greghubert4968 4 жыл бұрын

One of the best youtube film I have ever watched,thank you

@MrDudeCZ 4 жыл бұрын

HI Nate, It's quite a bit to put together for your viewers so thanks for all this effort. Honestly, I made my xj a very similar way in february this year. A "built" HP30 and a "built" 8.8 combo. I have been testing the 30 since then without any locker. We'll see how she handles 35"s in long term and in different terrain. Anyway, not a bad setup at all, I'm quite happy so far. I would be less cautious with a 44 but at least it makes me stay away from the really stupid stuff. In regards to brakes, I was actually able to fit akebonos in and keep my sweet 15" alu's. I only had the use 1,25" spacers and they clear fine. Thanks again and keep on rolling :) Cheers, martin

@DirtLifestyle 4 жыл бұрын

You welcome brother! You can do alot in an xj on 35s 👍

@VintageOffroad 4 жыл бұрын

Awesome work and great info.. wish I could find a channel where people are doing this for an old world jeep..loving my cj7

@rustyshackleford9685 4 жыл бұрын

Great video, always enjoy the new uploads. One point that I learned myself, when you put bends on any kind of link one side needs to be non adjustable (Welded DIY sleeved bushing) to keep that link from twisting. On my one ton TJ I had to make a Z bend on the pan hard so on up travel the diff wouldn't hit it, I put heims on both ends just like you did but mine is a bend in a vertical orientation not in a horizontal so it cant really twist too much and its natural gravity state is the position its supposed to be in. I still regret that decision a little but it's seemed to hold up and not twist.

@Vorhizzle 4 жыл бұрын

Have RCVs in my TJ Rubicon and that's about the only thing I haven't broken.

@zoexj4872 3 жыл бұрын

Nate, Almost ready to rebuild my axles in my XJ. You answered pretty much all of my questions with this video! I'm leaning toward a similar Dana 30 build and a Ford 8.8 swap. Thanks again. You have a great channel.

@tedhargiss1056 4 жыл бұрын

Awesome build Nate! I appreciate the details. I wish I had seen this before I built my D30.

@DirtLifestyle 4 жыл бұрын

Thanks buddy!

@austinadventure 4 жыл бұрын

i used an inner axle seal installed backwards as an outer axle seal on my 79 ford hp dana 44, works decent

@onetruebob_tj 4 жыл бұрын

Excellent series Nate! You and Muddy Beard setup your brother nicely. He owes you both big time. 👊👍

@DirtLifestyle 4 жыл бұрын

Thanks man! I'll be moving soon so I'll get my time back one way or another lol! He is family, its what you do 👍

@4x2WagonFamily Жыл бұрын

Thanks Nate… Very helpful on my Dana 30 build.

@moabwheeling 4 жыл бұрын

Hi Nate , I really enjoyed this build series and I'm looking forward to your next video . Thank you for sharing . Until next time take care .

@DirtLifestyle 4 жыл бұрын

Thank you! Glad your still enjoying my content!

@MonzaTom 4 жыл бұрын

Good 3 part series! Well done!

@btemp855 4 жыл бұрын

Great video man, looks like imma build up my axle

@Motoman714. 3 жыл бұрын

Very helpful with dana 30 axles and xjs!

@nicolettelowenthal8868 4 жыл бұрын

I enjoyed the build videos . Thank you for your advice on my sport s build with the 5.7 HEMI and 3/4 ton axles that I already own .

@DirtLifestyle 4 жыл бұрын

Awesome! Happy to help 👍

@GoatOffroad 4 жыл бұрын

Drooling over that D30! Goals! ❤️🐞

@ProjectXJ 4 жыл бұрын

I have a similar setup, without the RCV's, but I have chrolomolys. I have only spent about $1650.

@brianfedie8046 4 жыл бұрын

Thanks for all the great info!

@corbancocanour1229 4 жыл бұрын

Another high quality production! Great job Nate!

@DirtLifestyle 4 жыл бұрын

Thanks!

@WildBillFlysRC 4 жыл бұрын

Yes! Thanks for making videos. Cool stuff. 👍

@DirtLifestyle 4 жыл бұрын

Thank you buddy 👍

@bjbyrd6194 4 жыл бұрын

Love the channel brother! Great info and some awesome builds!

@benbutler7391 2 жыл бұрын

Good info Nate. Thanks.

@ChatanikaRoosting Жыл бұрын

Great video. Thanks for keeping it real with the pricing! -an XJ driver

@CFairNH 4 жыл бұрын

Awesome video!! Love your channel!

@metaldog7128 4 жыл бұрын

Nice work 👍 tougher stronger better 👌

@foxrace0985 4 жыл бұрын

just found your channel the other day, been watching old ones and all the new ones. keep it up, your videos are not only very educational but the editing, music and cinematography is fantastic. i hope this channel grows huge! i like your dl flag shirt, might have to pick one up next pay.

@DirtLifestyle 4 жыл бұрын

Thank you! I put alot of work into these. As I grow as a teacher, photographer and editor I hope this channel will grow as well 👍

@jinoby1 4 жыл бұрын

Thanks for the video! Badass!

@sewerratt47 3 жыл бұрын

My only Jeep Fab Channel !

@ruggedindsoup2135 3 жыл бұрын

Frickin’ awesome video. Thanks!

@mikaelwise807 4 жыл бұрын

Another great video I really enjoyed the steering montage...keep it up Nate

@DirtLifestyle 4 жыл бұрын

Thanks man!

@kevinthouvenell1750 4 жыл бұрын

Awesome video 👍 love the rcv axles

@DirtLifestyle 4 жыл бұрын

Thanks! We do too!

@FMJeeping 4 жыл бұрын

freaking awesome series Nate. I am hopefully heading down this road this winter. Maybe not as full blown as you went, but the 30 is plenty capable for the wheel size I want. Also if you break stuff easier to source.

@DirtLifestyle 4 жыл бұрын

Thanks man!

@TheBeardedJeeper 4 жыл бұрын

Great lookin axle

@matthewlamb3207 6 ай бұрын

Great video! It really helped me come to peace with upgrading my D30 for my 35s. I don't see the Amazon list anymore. I was looking for more information on the WJ knuckles and brake kit upgrade as well as the RCV and other parts to help me understand the costs of a rebuild today.

@stevezickefoose8563 4 жыл бұрын

Excellent presentation makes me want to upgrade from my 1983 CJ-7 to a JK [I'm 3rd owner 70K miles California no rust stock everything except tires, bumpers]

@tylerm97 4 жыл бұрын

Great info!!! Thank you!!!

@tw9676 4 жыл бұрын

Always enjoy your videos keep em coming

@DirtLifestyle 4 жыл бұрын

Thanks!

@TheoneDragon51 4 жыл бұрын

Yj 4cy high pinion D30 cromo warn hubs with 36" swamper's. 4.88 I don't flog it serving me well. Thinking about sleeveing the tubes and a truss. Great build I have enjoyed watching this.

@DirtLifestyle 4 жыл бұрын

The truss is a must! I'm not a fan of sleeves. They don't add the kind of strength a truss will provide. Not enough leverage. But it sounds like you have put together a sweet build! Light weight and low horsepower power is actually a great combo for automotive performance. Heavy rigs just don't handle as well 👍

@Dino30ish 4 жыл бұрын

Ford Sport Trac front rotors are the 5x4.5 bolt pattern and the same diameter of the wj rotor . Can also use mustang cobra calipers to fit a smaller wheel .

@Xtremeamput 3 жыл бұрын

Cobra calipers from what year?

@dorsk84 4 жыл бұрын

JK D44 swapped under. Artek makes the conversation kit. Adds 5" width. But we are now talking about having to do both front and rear now.

@DirtLifestyle 4 жыл бұрын

I like the JK 44s for a swap! Wouldn't be practical in our situation unfortunately. His ford 8.8 is pretty well bullet proofed now so bailing on it wouldn't be beneficial lol. Not to mention the added costs of 5 new rims, no cheap high steer options and JK 44 axle parts are more than dana 30. But if we were starting from nothing I think the jk dana 44 axles are a great starting point! I recommend them all the time!

@hillbillyhangover 4 жыл бұрын

Another awesome vid!!! Keep them coming!!!

@DirtLifestyle 4 жыл бұрын

Thank you! Can do!!!

@thecherokeechannel688 4 жыл бұрын

What a badass build.

@DirtLifestyle 4 жыл бұрын

Thanks buddy!

@stevenadelhoch6811 4 жыл бұрын

great as always!!!!

@davyleupz 4 жыл бұрын

That axle cost more than my XJ. 😂

@onetruebob_tj 4 жыл бұрын

Of course it did! 🤣

@RedRockCrawlers 4 жыл бұрын

haha sounds about right ;) @@onetruebob_tj

@posjoey 3 жыл бұрын

Lol same

@David-rj1ru 3 жыл бұрын

My Xj's axel cost more than your xj.

@2S1L3NT 2 жыл бұрын

Lol, well my XJ was purchased for 1700, but I'm 10k into it now with the upgrades 😭

@drummerboy3377 4 жыл бұрын

Dude, I don't know how I've missed it, but you're freakin jacked. 💪🏼😂Love the video like always

@DirtLifestyle 4 жыл бұрын

Lol 😂👍

@m.perfekt3055 4 жыл бұрын

CHEEZUS CHRIZE! Thats a lot of money!!!

@chester1013 4 жыл бұрын

Great video of the cost. Don't think I will be spending that much. I do have the hi pinion Dana 30 stock except for a zone 3 in lift and 31" on stock wheels. Maybe one day.

@shahargree 4 жыл бұрын

You are the best!! Keep uploading vids!!!!!

@DirtLifestyle 4 жыл бұрын

Thank you! Will do!

@bmaxTJ 4 ай бұрын

Thank you

@94Discovery 4 жыл бұрын

Sometimes it is the pleasure of building ,not the price ,👍

@DirtLifestyle 4 жыл бұрын

Agreed! And most of the time I trust my build quality better than some aftermarket companies because I took the time to make it right!

@luisnew6738 2 жыл бұрын

i agree this is the best video i have seen about the dana 30, and the list you provided is awesome. I have a dana 30 under the front of my 78 Toyota Wolverine. with a dana20 transfer case rolling on 33's with 4;88, what I have noticed it that my pumpkin is on the passenger side ? and every video iv seen it is different ! thank you for sharing

@rustybarbacles355 4 жыл бұрын

Amazing insights time and time again Nate. I found you through bleepin Jeep. SUB’D for sure

@DirtLifestyle 4 жыл бұрын

Thanks buddy 🤘 happy to have you aboard

@troyscottstevenson 4 жыл бұрын

my new favorite channel!

@DirtLifestyle 4 жыл бұрын

Thanks man!

@gzrgldr8288 3 жыл бұрын

I am using the Akebonon calipers on my xj swap with 15" wheels and have clearance, but they have 3.75" backspace, which I thinks makes a difference.

@randallbernard2074 4 жыл бұрын

I'm loving your channel just wish I had a ton $$$ to build.

@corypalmer662 4 жыл бұрын

Awesome video man. Hope we get to see some more of the low buck diesel truck soon.

@DirtLifestyle 4 жыл бұрын

I wish! I've been invited to a pretty cool experience to wheel in a few different states with other folks in the industry! I'll be focusing most of my energy on getting the tj 100% ready for that for a the next month or two. Unfortunately, I won't be getting to the next lowbuck diesel truck until after that madness is over

@corypalmer662 4 жыл бұрын

@@DirtLifestyle no worries man. Burn out is a real thing, so don't do too much. Especially working a full time job and trying to make videos.

@kevinengland4675 4 жыл бұрын

Great video Nate 😊 would love to see a 8.8 rear diff cost and truss build. Also the process of building a custom truss and cost versus off the shelf truss kit. Just ideas for us newer guys 😊

@brianfedie8046 3 жыл бұрын

Great Stuff!

@matthewroach5637 3 жыл бұрын

Being in Washington there is a ton of used parts to do a budget building on a dana 30. I got a hp dana 30 for 100$ almost brand new truetrac for 100$, a free dana 30 from a wj to steal the hubs off of. Rebuilding the brake calipers myself for less the 40$, 250$ for the pads, rotors, ball joint and hubs. Then 1400$ for axle trust, sleeves, 4.56 gears, rebuild kit and axle shafts.

@reedjack6564 4 жыл бұрын

Dude, loving the axle break down. Exactly what I needed to put things in perspective. I'm looking at upgrading my current stock axles 30/35 for my TJ rather than do a full swap to Dana 44s. Still pricey but I think it will be better regardless. Awesome stuff. Keep it up!

@gero195 3 жыл бұрын

Didn't think harborfreight bender could take dom thanks !

@pahelo5038 Жыл бұрын

02 Explorer Sport Trac front rotors will work without having to drill out new holes in the rotor.

@rogerrichardson2223 4 жыл бұрын

Mann Nate if you ever get to battleground give me some insight on my 88 xj you rock free camping on the south 40 with fire pit included your welcome brother

@pjh5337 5 ай бұрын

“Because my brother is related to Nate, dirt lifestyle”

@morganbarber2461 4 жыл бұрын

Just a note, Jeep actually had a big problem with the wj teves brake calipers. They were centered poorly and caused the rotors to warp. About midway through 2002 all grands got the updated akebono calipers to solve the warping issue. If you guys ever get bigger wheels might be good to swap the teves calipers out for the akebonos 👍

@DirtLifestyle 4 жыл бұрын

Definitely something we considered, and still will consider in the future!

@ProjectXJ 4 жыл бұрын

@Troy Becker Just swap in a ford 8.8 with disks for about the same money as a disk conversion kit. I did mine for $583, including truss and diff cover with a set of spare shafts, new brakes included. :)

@ProjectXJ 4 жыл бұрын

@Troy Becker But you still have the chrysler 8.25. :)

@ProjectXJ 4 жыл бұрын

@Troy Becker I hear you. The 8.25 isn't a bad axle at all. Make sure to swap internals of your distribution block when you do the disk conversion. It greatly improves braking. It didn't cost me anything either and only took a minute to install!

@billwalker5883 2 жыл бұрын

Happy Thanksgiving Nate

@WPowell420 4 жыл бұрын

A Wagoneer D44 is easy to swap in.

@middle-fork 4 жыл бұрын

Please help with info before I build up my D30 on a '05 TJ. THX!

@jarredmay7496 4 жыл бұрын

such an awesome video

@DirtLifestyle 4 жыл бұрын

Thanks man!

@egpc13 4 жыл бұрын

Good job 👌👍

@DirtLifestyle 4 жыл бұрын

Thank you 🤘👍

@tylerdubois9020 3 жыл бұрын

You can fit the akebono calipers with 15" rims, there are people that have done it on WJs. I think you need to grind off a small amount off of the caliper, but it is possible.

@craigwood3498 2 жыл бұрын

Love your content. I have a 04 TJ , 87 MJ ,2000 XJ and two 78 CJ's one 5 and one 7 Let's Build 👍 Your help shows me the way . Thanks

@JeepJeep234 4 жыл бұрын

Update. I broke my HP30 under my JK, and promptly swapped it for a Rubicon 44 with a truss gussets and skid plates. It has the factory locker with G2 gears, RCV shafts, and Teraflex hubs. Rear axle still no truss, but has a set of custom RCV axles with the Teraflex hubs and an E locker. 39-13.5 BFG KM3's.

@rangefreewords 2 жыл бұрын

Awesome build! How do you like your E-locker running the 39's?

@terrycastro7923 3 жыл бұрын

Love your xj wj build I am going to put your xj build under my TJ but only mods I will do is track bar bracket and truss. Then build the rest in piece work as money permits. Will I need to modify anything on the xj axle to bolt it on the TJ besides drive shaft and gearing.

@RedRockCrawlers 4 жыл бұрын

you said Bung... haha. But seriously, great looking axle and should be a great set up for that Jeep.

@DirtLifestyle 4 жыл бұрын

Lol thanks buddy

@strofimios 3 жыл бұрын

Don't know if someone mentioned it already but if you don't want to drill extra holes to the rotor you can use the one from a 2002 ford explorer.

@humzilla707 4 жыл бұрын

This channel is awesome

@DirtLifestyle 4 жыл бұрын

Thanks man!

@joediver69 3 жыл бұрын

Dude AWESOME! Joe from Miami been in love with jeeps my whole life I finally was able to pick up a 2006 TJ 2.4 l 6 speed trail rated I've got the a Dana 30 in the front and Dana 35 in the back whatever advice you can give me I appreciate it and last but not least can I go to you when I'm ready to do that massive build on my Dana 30 hope to hear from you soon look us up when you're down here in Miami Florida will make sure you have a good time we'll do some swamping thanks