848th one here.! I remember when you modified that planter. What a job that was.!

Proud of you for taking the time to fix the fast hitch before putting it back on the 4640. Doing a great job Chris!

Thanks for all your hard work Chris. I look forward to all of your videos. You help take my mind of my broken body by showing your daily battles. I hope your still smiling about being dad. You deserve it😊

Markers look great ! Don't forget to grease them

It's rained all day here off and on which is nice it wasn't dry but was needed

Great to see, thanks.

That was great Chris I enjoyed it the planter work was greatmarker stanchions

For the electrical on your tractor take the cowl cover off the dash on the inside and check your circuit breakers. They like to melt the plastic they mount in and develop a bad connection. They should be mounted in with 1 nut and the wires fastened with a second nut

The latest incarnation of the Deere logo appeared in 2000: the tagline was ‘two feet in the past, leaping into the future’

Im sick of the rain also! It will be sunny and next thing you know it starts raining out of nowhere ridiculous! I feel you Chris im tired of it.

Be good to see those side marker lights folded down now your set up with the duals. 💪💪

Great video Chris. Can't wait to see all your hard work payoff when you start planting corn for the season . Hope it's a good year for you .

On your MARKer arm, get set, GO PLANTING 👍👍👍

I would keep the cylinders maybe they would be good for something else at some point. Like a hydraulic top for the 3 point or it might be the right size to replace a bad one someday. Just sayin. And the yellow is usually for construction equipment. But replacements can be green or yellow or even black just depends what’s in stock that one cylinder may fit 20 different things or more

The deer, on the Deere logo went from jumping down (or at least in the downward portion of a jump), to jumping up (or in upward portion of a jump. The direction the deer is jumping has never changed, as far as I know.

Corns looking up, the whole corn belt is flooded

With all the hills, it’s no wonder that you’re covered up with random wet spots……my guess would be underground springs. I know it will take some years to get them mapped out and drainage installed accordingly, but if anyone can figure it out, you’d be my first pick. Marker arms look like a win.🫡

Thouse look good Chris. Enjoyed your video have a great day.

Kicking goals legend!!!!

Hey Chris. We use a engine hoist [ cherry picker ] to put on and take off our 3 point hitch. Might help you if you have one.

The markers should make it easier for you this year glad to see your improvements on the planter

Nice video

It's coming together, At some point you will get those seeds in the ground.

You need to tell everyone to check to make sure they’re still subscribed. I watch you every video and KZfaq unsubscribed me it’s I don’t know why but it’s some stupid thing KZfaq does.

The leaping forward Deere emblem like on all your equipment was from 1968 to 2000.

He talks about wanting storage for the planter yet there sets the combine in the weeds without even a tarp over the bin. Unless that bin was cleaned out good which I doubt the rotting corn rusting out the sheet metal.

That hydraulic block (alternating valve) should send oil to one marker when you cycle the hydraulics and then send to the other one the next cycle should not send to both, I have had the piston inside the block get sticky and give problems usually from setting for long periods of time.

Who cares how many acres u have!!!! At least they r getting farmed as they should b and putting food on ppl table!!! Keep up the great work!!!

You need some gravel looks pretty muddy there

The way you like your garden you should plant a few acres of sweet corn and sell it, nice cash crop.

Should have had that planner fixed up a month ago

It's seems you have a lot of geese around there that can no good you can get a canon that runs on a small propane and a trimmer and goes off then scares the geese off the municipal has them they do in Alberta and sask as well so they should have them there they are free to use

Hopefully you get some dry weather for planting

Chris, u may want to tak weld those dust caps to make them stay on.

Little candle wax on the stud and it will back right out

You should have used your tractor with the forks to lift that quick hitch save your back

I would keep them hydraulic solar. You may need them for something and your dust caps. If you put a little silicone around them, they’ll stay in a lot better.

Me and my son planted sweet corn on May 4th and there about 12in in height now

Making progress how about some led bar lights on front of your tanks for planting

Need a lite bar on your front weight bracket so ya can see with the saddle tanks on

positive comment your doing good ..

Saw a John Deere Articulate in the woods, hit a tree, newer than your 7520, had a big disk on,don't know what happened, but there was about 50ft of oil on the road, crossed the road, hit a tree, the disk is gone because it was sticking out in the road, but the tractor has been there about 3 days, far as I know the driver didn't get hurt

Just put those 2 wires together and leave the lights on. No switch needed, with the coop you'll be making money back!

Check under side panel under dash just inside door.i think there is fuse block.on my 4840 it would get hot you my want to check.😊

Looking at a 7300 12 row, 20 inch space unit on auction. What's your thoughts on a 20 vs 30 inch space for silage corn? Also this is a 3pt hitch unit

I believe I’ve heard last year that you have some gps equipment. Will you be putting it on the 4640 this year?

That's not going anywhere famous last words

They do lie about the load led bay lights draw across switches, they should be through a relay.

Time to switch to rice?

My life is full of negative. Keep h4ad up always. Haters going to hate. I have sticker on my truck for that. All that matters is kids. And you do you. Have a good one chris

I could use that cylinder mine just blew

Get a revised drill bit

😎👍🏼🇺🇸🇺🇸

"Jumping ford"???????

FIRST 4.00

Frist one here

You’re getting a new road because you’re a new taxpayer you can only have the best ha ha I’m joking with

First

first

I seed more in one day than you do all year .

For the electrical on your tractor take the cowl cover off the dash on the inside and check your circuit breakers. They like to melt the plastic they mount in and develop a bad connection. They should be mounted in with 1 nut and the wires fastened with a second nut