Watched loads of you're videos, top man helping Navara and 4x4 owners!!! I was watching mighty car mods and noticed Marty also says shazzis :D in Australia mate!! Had to comment it!! Thanks for all you're content mate

Mine failed in Croatia, nightmare getting home using Warranty recovery as new hose going to take 10 days to get. Once recovered to UK hose replaced under warranty, new hose was supplied sheathed with woven nylon over sleeve and metal bracket retaining to radiator.

Well done on bringing this to our attention. Mine is booked in for next Friday. 2017 tekna

I work at a nissan dealership and have done these recalls. From a workshop side they're really easy to do and take about 10 minutes to complete. We've had this issue for a while with the AC compressor pulley wearing through the hose. Some hoses sit really close and others aren't anywhere near it. With regards to the repair, the original way to fix it was to replace the hose with a new one that had a mesh sleeve over it to protect it from wear, and I think the cable tie repair is better. At first glance it seems like a cheap and tacky repair, but cable ties on hoses are a pretty common way of securing them. From what I know, there's nothing wrong with the hose it's just a clearence issue, you just have to make sure the technician who does the repair drills the hole to the right size, because if it's too big the hose will pop back off.

Hey Des Congrats on the Anniversary. also do you reckon a Silcon replacement hose would help?

That park looks beautiful.

I find that a lot of the time it’s clowns servicing them getting at oil filter taking pipe off and not reclipping it back . that ends up causing it !

Iv seen they have a issue with the rear main seal leaking within the warranty period

Just caught ours in time. Also you know these engines inside and out. Best way to change thermostat on a D23??

Do you know if the Spain built d23 has a bracket at the bottom of the lower radiator hoses? My Thailand built D23 just cooked because of this issue and Nissan Australia are saying that it’s not part of the recall because the Thailand built engines have a bracket at the bottom of the hoses where they join together… any help would be much appreciated cheers

What is your opinion the best oil for my Navara d40 2013 ???

Hi mate I'm a little confused, I have a zd30 1999 nissan patrol with head problems. I have been turning this over by hand for days, can't seem to get all timing marks to line up ,before head removal . Now my way of thinking is , if your on tdc with cam lobs facing the right way , you should be able to mark the gear drives and timing chain. So long as nothing is turned and all your marks line up, it should still be timed correctly, am I on the money or way off . Any help would be greatly appreciated . Yours sincerely Keith from down under , but was born and raised in the SE18 area.

i have experienced with that kind of problem the radiator hose touching the pulley and was damaged and leaked. for more than two years i leave this problem but last month the leaked has cause me problems because ivé just only repaired it with plastic epoxy. i DIY once again..and with a thorough inspection i found out that the connector between the two hoses from radiator to turbo. the position of the plastic hose connector is in the wrong way the slot was not inserted to the bracket so i changed the position..then that was it..the hose distance from the crankshaft pulley, problem solved. check your NAVI maybe we have the same problem..why recall it? just a small factory defect..

Not related to the video. Have you ever done a qr25 swap on a Nissan Pathfinder?

I have a np300 and recall for this Monday, for 3.week my truck is overheating, changed 2 pumps on radiator and main one on engine, but. Still have the issues,. What would happen or am I to late with engine

nice park so green

At least they aren't just tying it back with used baler twine, the farmer's friend.

Its his anniversary for 23 years of being a cowboy

Google 'des marples , west Yorkshire engines' this guy is a joke

Good example why Im sticking with my 1996 1hdft 80 series Landcruiser, 100x the vehicle.

Shocking!

Just had this happen today, what a nightmare. They are ringing me back tomorrow.

@west yorkshire engine services all the np300 are for recall i have one just 2 months old

I’ve just done a google search on your company and it’s coming up your company has been dissolved?? Can you confirm this is correct?

Great video any advice on a nissan x trail 2.2 diesel 2007

kicking the can down the road till warranty expires :/

can you make a vdio about navara d40 change original aircleaner to the mushroom filter

The hands, relax them

I have a d40 navara and it won't start or crank over I need help have you got any idea on what to fix, nats light stays on when I try to start it all fuses and relays are fine

Are you on face book?

may as well repare it yourself.

Happy wedding anniversary Des

Manufacturers are happy to bodge stuff up these days. Happy anniversary buddy.

Actually all that information is incorrect. The pipe doesn't expand at all. It doesn't hit the crank pulley either. The issue is caused by the pipe not being refitted correctly and or the bolt being left out completely. The pipe actually catches on the A/C pump also.

Only recalls when pissy des been at them

What a bodge

Very Happy wedding anniversary..

😂

Your family's bread is buttered by the work you supposedly do n nissans. I am supposed NIssan hasn't given you a job yet as you know so much more than their multi million dollar R&D department.

Buy a Toyota, 😀

Get a Toyota and have done with it 😂

Never a Navara 🤮

Why the hell are people still buying Nissan's. There absolute junk. The amount of zd30 and YD motors iv acquired over the years from people buying cheap 4x4s is ridiculous. There cheap for a reason..