Using Wax on Turnings - Chestnut Products Finishing School 4
Рет қаралды 21,761
6 жыл бұрынUsing Wax on Turnings is one of the quickest and easiest methods of finishing your work. Watch as Chestnut Products show you how it's done and which waxes work best in which situation.
Find out more at www.chestnutproducts.co.uk
@colinball1960 11 ай бұрын
Great video Terry. I know that there are instructions on the tins but a demo is a lot better👍
@WoodenItBeNice 3 жыл бұрын
Hi Terry, Great video and explanation of your wax finishes. Take care Terry. Cheers, Huw
@ChestnutProducts 3 жыл бұрын
Thanks Huw. Hopefully you can see why it takes us so long to get these done!
@waywoodturnings6664 6 жыл бұрын
Another great video, thanks for sharing. Kind regards Paul
@Bawdsey64 6 жыл бұрын
Hi Terry Your video is just like your products EXCELLENT! One question, what speed were you buffing at? Cheers Roger
@ChestnutProducts 6 жыл бұрын
Hi Roger Thank you for that kind comment! I usually buff at around 1100rpm. That's a good starting point, see what you feel comfortable with. Terry
@avecforte8851 4 жыл бұрын
@@ChestnutProducts How hard do you press when buffing?
@ChestnutProducts 4 жыл бұрын
@@avecforte8851 A firm, constant contact is required, the large does the work. You shouldn't press hard as this can cause too much heat.
@cgseymour 4 жыл бұрын
IS there a distributor in USA?
@Phenrica 2 жыл бұрын
Hi Terry, do you have to store the wax sticks in any particular way? In a sealed container etc. Great instructional vid Cheers Steve
@ChestnutProducts 2 жыл бұрын
Hi Steve. No, the waxes are solid blocks, to there's no need for any special storage; just somewhere safe and where you'll be able to find them when you want them!
@icespeckledhens 4 жыл бұрын
Can you use the woodturners wax stick on the buffing wheel C? Thanks James
@ChestnutProducts 4 жыл бұрын
Hi. No, the Woodturner's Stick Wax has beeswax in it and this makes it too soft to use on the wheels. It's liable to smear rather than polish.
@steelbubbab1 3 жыл бұрын
Do you have products that are food safe so if i was to use them on a drink wear it would be ok?
@ChestnutProducts 3 жыл бұрын
You could use Food Safe Finish but it will only hold liquid for a short period of time.
@brianmccann9769 2 жыл бұрын
Very cold workshop, What effect will this have with your sealers and polishes?.
@ChestnutProducts 2 жыл бұрын
Slower drying, thicker and harder to use. Damp atmosphere can also cause blemishes in the surface.
@einarvasvik1507 5 жыл бұрын
Chestnut products
@linofernandez8908 5 жыл бұрын
Traducir
Chestnut Products
Рет қаралды 797
Kerry Corney
Рет қаралды 16 М.