Vevor 66lb. Anvil: Will it Survive?
Рет қаралды 3,010
3 ай бұрынRoy and Thomas try to destroy the 66lb Vevor anvil will last with sledge hammers.
You can check out this anvil at:
66lb Vevor anvil on Amazon amzn.to/3w42R3x (amazon Affiliate link)
66lb vevor anvil on Vevor.com and use VVPRO to save 5% off s.vevor.com/bfQRVH (affiliate link)
66lb Vevor Anvil Videos:
The Vevor Anvil Review: • Reviewing the 66lb Vev...
How to Traditionally Dress Your Vevor Anvil: • How to "Traditionally"...
Vevor 66lb Anvil: Will it Survive? • Vevor 66lb. Anvil: Wil... (this video)
Vevor Anvil: Deep Dive on What Happened: • Deep Dive: What Happen...
Join this channel to get access to perks:
/ @christcenteredironworks
--------------------------------------------------------------
Want more Christ Centered Ironworks?
--------------------------------------------------------------
Want to SUPPORT what we do here at Christ Centered Ironworks Blacksmith Channel?
Visit my channel: / christcenteredironworks
Stop by my website: www.blacksmithpdfs.com
Get some merch: teespring.com/stores/christ-c...
Shop my Amazon Influencer page for shop tools: www.amazon.com/shop/christcen...
Social: / christcenteredironworks
@SpeargrassForge 3 ай бұрын
Doing some rough calculations, thomas was hitting with over 300,000 lbs of force and Roy with over 200,000 at point of impact. All things considered. That little anvil held up alright
@sharpbendforge7916 3 ай бұрын
The heel on most London pattern anvils is usually the weakest spot, so that breaking off didn't surprise me at all. I mean, for the money... Show me better.
@ChristCenteredIronworks 3 ай бұрын
Really can't show you better bang for the Buck... In my opinion this anvil in normal use would last a complete newb decades.
@jean-francoislepage105 3 ай бұрын
Not bad at all for such a heavy beating! Thank you guys!
@ChristCenteredIronworks 3 ай бұрын
You bet!
@messylaura 3 ай бұрын
considering the 66 twin horn passed i was expecting it to have a better grain, breaking fair enough its at a double weak point in being the thinnest part and through the hole
@krtknives 3 ай бұрын
We are waiting for the same test in the double horn German-made anvil on your side.
@ChristCenteredIronworks 3 ай бұрын
That won't be happening lol
@krtknives 3 ай бұрын
@@ChristCenteredIronworks 🙂🙋♂️
@swordsilkscreen9333 3 ай бұрын
If the coyote switched to Vevor he'd catch that darn road runner.
@ChristCenteredIronworks 3 ай бұрын
Lol and he would be still able to forge with it afterwards 😉
@daltonmartin98 3 ай бұрын
Id say it did better than I expected
@peltiereric6497 3 ай бұрын
That right there is a perfect example of why you make a mild steel striking anvil if you’re going to be using sledgehammers
@ChristCenteredIronworks 3 ай бұрын
It could be a Handy option especially if you do a lot of that type of work
@un-factory 3 ай бұрын
Thank you for the useful information.Good video!🎉🎉🎉🎉🎉🎉
@GeneSimonalle 3 ай бұрын
Ouch. Thanks for the science!! 🤠❤⚒🔥
@ChristCenteredIronworks 3 ай бұрын
Any time!😉
@mikeduggan9454 3 ай бұрын
Show me an anvil that size that will stand up to that abuse.
@gavenmclrn 3 ай бұрын
It did what I expected. I knew the tail was going to break off but it should be able to withstand normal usage.
@sean4987 3 ай бұрын
Poor anvil 😅
@aaroncallis1785 3 ай бұрын
I wish someone would do the same tests on the more reputable contemporary anvil makes/models (i.e. Emerson, Scott, JHM, TFS) to see how they hold up. I know that would be expensive for the tester
@ChristCenteredIronworks 3 ай бұрын
They're coming in the future 😉
@Tinker_it 3 ай бұрын
Thanks for this, it pushed me to buy my first hardy hole. Kind of a big deal for me.
@ChristCenteredIronworks 3 ай бұрын
Glad I could help!
@dragonstonegemironworkscra4740 3 ай бұрын
You fellows gave her the beans. No doubt. Tbh i wasnt surprised the tail broke off and expected it to fracture thru the hardy hole. Thanks for sharing this. I believe it proves once again the vevor 66lb London pattern is the best in class for the money spent. Good test. Lets see whats next for this little gal 😊 Blessings abundant Sir Crawford out 🙏🔥⚒️🧙🏻♂️
@ChristCenteredIronworks 3 ай бұрын
We agree!
@ChristCenteredIronworks 3 ай бұрын
Thanks Mr Crawford for taking the time to watch
@ret7army 3 ай бұрын
Impressive in the fail...also in the earlier review. Worth looking into
@HighDesertForgeIronworks 3 ай бұрын
HAMMER TIME! it held up pretty good to a couple of "Primitive Petes" pounding on it.
@ChristCenteredIronworks 3 ай бұрын
Lol love it "primitive Pete's" 🔨💪🔨💥
@1noryb 3 ай бұрын
oof thats a lot of work! But does it grind coffee in the morning? Thanks for the video!
@scottwendt3282 3 ай бұрын
It appeared to have pretty good rebound, was that the case?
@ChristCenteredIronworks 3 ай бұрын
Yes in the original review video we got 90% rebound on the ballbearing drop test
@TAS1303 3 ай бұрын
Such a pitty to mess up those sweet dressed edges 😊
@ChristCenteredIronworks 3 ай бұрын
Tell me about it😜
@seandevine3695 3 ай бұрын
For the price, I’m not mad about this performance at all. I am kind of mad that you killed a perfectly good little anvil. Can I have the pieces?
@stephenpadilla4086 3 ай бұрын
I would love to have the "scrap" to use as a knife maker anvil!!
@Theblacksmithe87 3 ай бұрын
I knew that tail was going to break that seem to be the weakest part of that anvil someone else said that as well in their review, they were worried that that would break off overtime
@PossumSausage 3 ай бұрын
These tests are great but its hard to tell without a good anvil as a control. Will you and Thomas take some sledge hammers to Olga as a control??? Sorry, I'll see myself out 😂😂😂
@ChristCenteredIronworks 3 ай бұрын
Lol please do
@PossumSausage 3 ай бұрын
@@ChristCenteredIronworks😅
@thomasgoodemoot 3 ай бұрын
HAMMER
@richardsurber8226 3 ай бұрын
well everybody knew that tail was a gonner
@Grizz0220 3 ай бұрын
Do this with a Holland Anvil
@billywalker9223 3 ай бұрын
Im not certain that my Peter Wright or Swedish anvils would withstand that much abuse on the tail.
@ChristCenteredIronworks 3 ай бұрын
They probably wouldn't.... And would cost 8x The Price. Thanks for watching
@xxskippernate409xx6 3 ай бұрын
Just the design of the anvil? It's thin compared to the thick tapered heel of a German pattern.
@nightmarejr 3 ай бұрын
Send it back and see if they warranty it
@ChristCenteredIronworks 3 ай бұрын
Lol probably not
@RenKnight347 3 ай бұрын
The shipping alone to send it back would be astronomical which is why I'd never buy one of these when for roughly the same price point, Harbor Freight sells that 65 pound Doyle. At least with Harbor Freight, if there are any issues, just return it to the store and that eliminates any shipping costs. You may either choose to get a refund or an exchange depending on what their stock levels are at the time with no questions asked. I am not saying the brands that HF are selling are any better than Vevor. But, why deal with the added shipping costs if you experience any issues when there is at least one retailer who is willing to remove that issue from the equation in order to secure your business?
@billssmithy7352 3 ай бұрын
I got tired just watching you guys.
@ChristCenteredIronworks 3 ай бұрын
It was fun and exhausting 😂
@AlabamaWildman 3 ай бұрын
2nd comment!
@adammckay296 3 ай бұрын
Was any information you learned in this filming worth your eyes?? Put your bloody safety glasses on your face man
@ChristCenteredIronworks 3 ай бұрын
Watch again this time closer...
@adammckay296 3 ай бұрын
@ChristCenteredIronworksHa,I need the glasses,you sold me on the little anvil though the horn took it well,of course the heel was going to go.Thanks Roy
Yellow Goose Forge
Рет қаралды 6 М.
Christ Centered Ironworks
Рет қаралды 60 М.
Ozark Overland Adventures
Рет қаралды 184 М.
Salvage Workshop
Рет қаралды 2,4 МЛН
Christ Centered Ironworks
Рет қаралды 68 М.