Ammo availability

ALMOST every election

@Colin Yousef wtf r yall babbling on about

Wait it out. It will cycle thru.

Just ordered yesterday. Did you receive yours yet?

This is exactly what they should put out next!

Absolutely! And all in 40gr!

Yes. It would be a lot faster. However this is actually surprisingly reliable. I have done this several times doing my own research testing 22 repriming, and you can pack match head powder into a case rim by hand and it'll work 100% of the time. If you have a lathe or a pneumatic rotary tool, then this is probably better, but for those who don't, this manual method certainly works.

They do sell a kit for 22mag.

They do I’m pretty sure it’s all the same

If your having that problem use a reloading reamer

Took small pointed punch with angled shoulder. Gave the case mouth a tap with a small brass hammer. Flairs neck a tiny bit, also round out case mouth that are out of round. Bullet go in every time. Crimping tool takes the flair out.

I was thinking about doing the 45/45/10 tumble lube for 22 wmr.

Mix fine match head powder with the red striking strip of the match box Scrape the red powder with a sharp blade test the mixture before repriming.

You would have to send the bullet through a resizer after powder coating. It is a good idea tho. I would. Maybe lee would make a custom sizer.

I know barely anything about fishing, but as long as the sinker is 100% lead and you know how to get all the impurities out I see no reason why you couldn't

Zinc is your enemy, other than that, it's finding a temp that works for your mold. If your lead is castable, it will not be hard enough to hurt your barrel. I've see sinkers loaded into 12 gauge as buckshot, so yeah, it works, it's lead. PPL cast sinkers with the same ingot that will cast a bullet.

YES you can. I buy the big egg sinkers and wheel weights all the time.

Yes I use fishing weights, to cast, for a 45-70.

Здравствуйте, вы разобрались с релоадом 22 LR ?????

@@user-nc6js6od7p да. Спасибо.

@@KalashnikIlya есть видео о том как снаряжаете патроны на мелкашку ????

@@user-nc6js6od7p да времени займет многовато. Но если ты увлечен, то только в кайф.

@@user-nc6js6od7p И я очень вам советую удалить свой комметрарий и на время избавиться от мелкашки. Зря вы про разрешение написали. Теперь в России 95% случаев к вам с обыском прийдут в течение до полугода. Нельзя такое в интернете писать.

Issue may be the type of powder you used. Not all powder burns at the same rate…

@@CanabalasianFury i didn't load the shell. Just test fired the primers in an empty casing. The prime all primers hardly make a snap sound. Factory primers sound like fire crackers going off. All the primers made from prime all either do nothing or they just make a weak pop.

Honestly, it might now have been you or the powder. Reloading 22 can be a huge pain and unreliable. One thing I might recommend however is that you mix some nail varnish in with the powder to cement it. It might be that the powder fell out of the rim because it wasn't affixed in.

Yes we are we’re just 3-4 weeks backlogged

That works

Considering copper melts at roughly 800* f higher than Al you can bet the mold will melt or deform as aluminum melts at a much lower temperature.

No difference.

@@noahway13 the crimping step wouldn’t work but the priming is the same. I got the 22mag setup also, mainly for the bullet mold seeing as it’s got 2 same cavities. They aren’t the same as the 22lr cavities but the crimp cavity is the same in both molds. I imagine you’d have to place the 22mag shell in at the correct depth by eye instead of simply placing up to the rim like you do with the LR setup. I’ll try it when I get some empty 22mag brass. I just finished priming a few LR shells and made a few #11 snap caps with primer. Gotta mold some bullets and I’ll do a test but I’m not going to shoot off mag rounds just to test that kit

We have a 22 mag kit thanks Brian

Any update on this? I've recently hopped in the same boat.

lol nevermind! You answered my question in the video about the die. (if using brass not fired from your own gun, resize, right?)

bgilmore3 the kit is set up like the old lee loaders so if u are shooting the case out of the same gun or u check the cases before u load them your good to go if u don't want to do that the re sizing is the perfect option

@John Beige duh. I can tell without that, geezer, far from newbie here

@@independentthinker8930 may be tge humidity do you live in a humid area?

@@travisj.1938 it is in summer. I got a pm that gave suggestion to try

@@travisj.1938 if it's so sensitive it's useless to me. Stick with roll caps

@@independentthinker8930 that really stinks your not having any luck with it. I do not have one I was interested in getting one but am having second thoughts now. I am unfamiliar with roll caps I will look them up 👍

If I could eat brass, lead and matches and poop out loaded ammo I would. but I can't.

I dont know seymore

Shtf !!!! If you need more during that time then you can make your own