Absolutely amazing, thanks mate, I successfully fitted it myself thanks to you

I was struggling with the earth too so that has helped me out on a 2012 T5.1. 👍👍

Thank you so much for this info. I couldn't believe my luck when I typed in the search request to find you had exactly the same set up as I have. I've had the T6 Highline for only 3 days but can now crack on with this particular job. Best regards. ☺

Thank you very much for taking the time to make this video. I hardwired my dashcam today in our T5, your video was a great help.

Great video, you've given me the confidence to do this now, thank you,

Thank you for doing this video. I've just nipped to Halfords, bought the same dashcam + fitting kit and installed as per your version. Perfect - Thank you :-)

I've just fitted my nextbase dashcam similar to yours. Thanks for the video. Great info and no visible cables. Perfect👍

That’s really helpful. I already have all the nextbase kit with a rear camera that I had previously installed on an estate car that I have recently sold. Planning to put it in our T5 camper and thanks to you should be quiet straightforward. Cheers

Thanks for taking the time to make the video. I want to fit similar and your video has helped me with the easiest place to wire it all in.

Thanks mate, I’m waiting delivery on my VW shuttle t6.1 and was hoping It was gonna be easy hardwiring my dashcam. Thanks a lot , this video’s definitely gonna help me out .

Thanks for the video, really helped today with hardwiring my dashcam and saved me £30 as the same time...

Cheers for this video! I've got a T30 like yours and am about to do this to mine. Many thanks again!!

Another benefitter of your vid for my transporter purchase, thanks

Just got my new van and was wondering why the cig socket would not switch off. Great help thanks, buddy.

THIS IS WHAT KZfaq IS /WAS ALL ABOUT. NOT MAKING MONEY AND ADVERTS. community videos!

Saved me loads of time. Thanks for the heads up.

Just about to pick up a T6 camper van and want to hard wire a reversing camera, your video has helped a lot thank you. you will be up 100k subs in no time. Ok just looked back and you have one video maybe not 100k subs but helpful non the less

Cheers for that video, I'm about to hard wire a sat nav on my T6 and this was a big help

Excellent, thanks for detailed description

Thanks for your info, here in Australia I don’t have an airbag connection in the same place and I will solder a wire into a fuse and be good to go just waiting on my dashcam to be delivered. Thanks again great info.

Thank you for all the advice

Great info mate ,done my last weekend no problems ,could do with a few more people on KZfaq like you who takes the time to put a video on and saves everyone a lot of time and money

Hi. Very honest video. I know us men don’t like admitting to mistakes good on you. I decided to take up VW offer to have a Kenwood DRV-410 dash cam hard wired free fitting. Booked California Ocean in 1 pm all ready to pick up 3pm. Total £200-00 lnc vat. PS Great video 👍

Thanks very much, that was a great help for my VW T5 camper. Great advice and very clear.

Great Video, many thanks 👍👍👍

Dude you're a legend! Cheers for posting this.

Great video, just fitted one to my T5 following your instructions. Thanks for posting.

Great help,thankyou

I was about to cut the wire that came with my camera and start attacking the ignition wires lol. Now 20 quid later and a trip to halfords. Ace mate. An yeh plastic trim tools are essential lol

Great vid you r right earth wires a pig. If you disconnect your main battery for 5 min then re connect. your dash error light will disappear although it may still be logged by cpu as an error. Inform garage on next service so they ar not looking for a fault that doesn’t exist. Part of service is check and clear faults. No extra charges 😁😁

Good video, thanks. I'll now fit the same camera in my Passat with confidence :)

Excellent, well done, that’s helped me no end, cheers

Thanks for the great video, you’ve saved me the reset fee i’m Sure - topman

Thanks . Mostly on the air bag switch . (Sorry at your mistake ) I would have taken the plug off as well .

Thank you, I really appreciate your advice

Thanks a lot for the information. I have the same job to do.

Just seen your Yorkshire pop vid and he is guilty of plagiarism he watched your vid and regurgitated your info without giving you the credit I will b doing one on a 2009 which has different f box and I will be giving all credit to you on the neg wire as I took mine direct from battery 👍👍👍

Thanks for the video.

Thank you. Very helpful

You wasn't foolish, first time is a lesson, second time is a mistake, third time is crass stupidity.

Thanks for this great video, it was very helpful, just wondering do you think it is possible to wire thro the interior light conections ???

Cheers mate I'm off to buy hardwire kit

Thanks for sharing pal ! I would have remove the airbag switch and done the same without watching ;)

Great video, wish I’d seen it yesterday when I started my installation, 🙄. I followed a similar route but managed to run the cable without taking off those trims. Only trouble is, my kit came with a rear camera and now have to run another, and I doubt I can get it in on the same side. I have question if I may. Is your hazard indicator button ( red triangle) illuminated when you get in your motor? Mind does and goes out when I leave. I only noticed it after I done the cable install. Thanks again, I was wondering what was behind that black panel 😂.

Thanks for a great straight forward how to video, I’m just about to do the same job. Ta.

Hi, why did you spend £120 on a dash cam when there are loads at a lower price, is your one something I'm missing. Great vid and first posting, exceptionally clear well done you.

Hi, thanks for the video. Is your piggy back fuse holder the Mini type and also, is it rated for the fuse size you have piggy backed from. The fuse holders that I have found are only rated at 10 amps.

Thanks, great video. How did you get the cable through the headlining?

good vid, thank you

What size are the fuses eg micro or standard so that I can order the correct size piggy back mount. Cheers

Great vid. Did you have to drop the roof lining down to feed the cable? Or did it just tuck in

Great video - just about to fit a dashcam to my T6 Transporter van which looks to have the same interior parts. One question though - is it possible that pulling the middle blue fuse to fit the piggyback carrier caused the air bag warning to come on or was it deffo because you unplugged it from the side panel switch ? Also, did you find out what that fuse feeds ? cheers

Hi

A lot of talking and very little info