How to fix a GE a washer that will not spin. Learn how to diagnose the problem by testing the lid switch, motor capacitor, and motor drive belt. GE Model Number: GTW460ASJ7WW
Пікірлер: 617
@johncasor96982 жыл бұрын
Another Great Video... Thx... and that is a great machine and easy to use and repair... good job... that machine is about $700 at home depot...
@DuctTapeMechanic2 жыл бұрын
Thank you! Yes its around $700 plus a 4 week wait to actually have it delivered to your house
@muhanadalhasani3653 Жыл бұрын
@@DuctTapeMechanic ¹
@amyuncaged Жыл бұрын
Really?? I find that it's a pain in my arse😭
@amyuncaged Жыл бұрын
I bought this washer and it won't spin or drain. Although I jacked w it today and it drained, weird. It acted like it worked hard, just won't spin 🥴🙄😭😭
@ihateflatbunz7 ай бұрын
@@amyuncagedhow did you fix that issue?
@victormorales4153 Жыл бұрын
I just fixed my washer and looked like a hero in front of my fiance. Thank you! 🙌🏽
@DuctTapeMechanic Жыл бұрын
Awesome glad to help! Good work!
@ronaldbeckman908 Жыл бұрын
TIP TO PUT NEW BELT ON. This video helped a lot. My belt was broken. The new belt was stiff and difficult to put on right out of the bag. So I took a hair dyer and warmed the belt up and it became more pliable and slipped right on.
@DuctTapeMechanic Жыл бұрын
That is a good idea. It was a bit stiff to put the belt back on! Thanks for watching!
@Istruekin Жыл бұрын
@@DuctTapeMechanic hey bro will it spin with just power and water connected. I'm testing but it wont spin
@Vostigo2 жыл бұрын
Great video, luckily my belt slipped and I was able to put it back on. It's working like a dream again. This is the first video that broke everything down and helped me get straight to it.
@kalbarber3704 Жыл бұрын
Thank you so much for your videos !! My husband and I were able to fix our machine together He’s a paraplegic and so him trying to fit in our laundry room and do the things he would’ve been able to do before prove to be very challenging but I showed him this video and together we were able to dump the washer over and fix the belt. Thank you!!
@DuctTapeMechanic Жыл бұрын
That is awesome! Great job getting it fixed.
@gregappold9986 Жыл бұрын
Thanks my man! Saved me hundreds of dollars because my belt was broken. Shipping cost more than the part. So easy to install. Thank you!
@DuctTapeMechanic Жыл бұрын
Glad it helped!
@CDURR83 Жыл бұрын
Great video. Had the same problem. Saved me a lot of troubleshooting because getting to the belt is so easy and it is so likely to fail that it was the first thing I wanted to check!
@DuctTapeMechanic Жыл бұрын
Glad the video helped!
@relaxrelax14272 жыл бұрын
You just saved me $400 on a new washer! Tipped it over and removed the cover and the belt was popped off. Popped it back on and tightened the loose pulley (probably the reason the belt came off in the first place)and good as new!! Thanks Man
@DuctTapeMechanic2 жыл бұрын
Hey thats great! Good work
@chrismwills2 жыл бұрын
My washer had a broken belt and your video helped me troubleshoot and fix the problem. Saved me a good sum of money! Thank you!
@DuctTapeMechanic2 жыл бұрын
Awesome to hear! Glad it helped.
@fredprice58262 жыл бұрын
Best video ever. Just saved me $1000 from getting a new washer. The drive belt was chewed up. Thanks
@9Dark-Warrior6 Жыл бұрын
Thanks man, I'd have never known to check the capacitor had I not seen your video. Fixed my problem and saved me a ton of time.
@DuctTapeMechanic Жыл бұрын
I'm glad it worked! Thanks for watching!
@leny1366 Жыл бұрын
Thank you so much! you saved me from buying a new machine. My model is not this one. I called a repair guy, he came the first time and said it was a clogged hose, after two washes the problem started again. The second time he said the problem would be the switch and it would be better buy a new machine because that brand they weren't even repairing it anymore. Before buy a new one I saw your video. It was more expensive to pay his visit than to buy the part and fix it.
@DuctTapeMechanic Жыл бұрын
Perfect! Im glad the video helped! Thanks for watching
@georgiapolicek9foundation Жыл бұрын
This video saved me hundreds of dollars. My issue was the $30 lid switch, which I was told by someone who has worked on these for years couldn’t be the problem, so thank you for this video!
@DuctTapeMechanic Жыл бұрын
Awesome Job! Thanks for watching!
@jaileal8806 Жыл бұрын
Great upload thanks. Really useful tips and tricks that hopefully saves people a lot of time and headaches. Perhaps worth mentioning to those not that familiar with Capacitors is that a multimeter tests Farads and that the results can be misleading. A capacitor showing the correct Farad reading can still be non functioning if its ESR is out. To fully test a capacitor you need an ESR meter, but I understand that's not a normal piece of kit owned by most. If in doubt it's often worth just trying a new capacitor, and if its not needed, well then-you've got a spare. If you test capacitors or enjoy electronics repair, a decent ESR meter sets you back about 50 USD and also has some other useful functions and to a degree allows you to test components on a circuit board.
@DuctTapeMechanic Жыл бұрын
Great points! Maybe I'll do a video on how check a capacitor using an ESR meter! Thanks for watching
@ChocolateZombie6197 ай бұрын
Hey man I just wanna say thank you! Your videos not only are easy to understand but are straight to the point. You’ve helped me fix both my washer and dryer. All love man thank you again!
@DuctTapeMechanic7 ай бұрын
Appreciate the love and support. Comments like this keep me going!
@MariselaCronin5 ай бұрын
Hi, where can I buy the belt?
@michaelgasperik4319 Жыл бұрын
I like the "test area" setup you've got. I've been repairing and selling "free" appliances and lawn equipment for years.
@DuctTapeMechanic Жыл бұрын
Thank you! Right on man!!!
@alanwood58572 жыл бұрын
Good troubleshooting, I checked my belt, (actually could smell it) and that was the issue as well for mine, easy cheap fix! Thanks.
@DuctTapeMechanic2 жыл бұрын
Thank you sir!
@richardbalmir7084 Жыл бұрын
Awesome video. Was able to repair this myself, learned and saved money. In my case, the belt was mangled in the teeth of the pulley so I had to shake the pulley free after removing the nut to clear out the mangled belt.
@DuctTapeMechanic Жыл бұрын
Glad you found the video helpful!
@Lovinnewlife28 күн бұрын
I just did this and no it was not a sock..it was a shoe string! Easy fix! Thank you so much!
@A10TOES2 жыл бұрын
I have same washer. Been watching all videos. That was a simple fix. Probably elderly people, likely can’t do the fix themselves and you know repair men charge a lot to fix. I paid $600 three years ago for mine. I’m sure it’s more now. I subbed. Thanks!
@DuctTapeMechanic2 жыл бұрын
Glad I could help!
@tri9398 Жыл бұрын
You didn't say what the fix was for yours.
@AC-ns4ql2 жыл бұрын
The reset actually worked! Thank you.
@swartzrobles Жыл бұрын
Thank you for the help, absolutely was the belt, changed it myself which I never do untill I saw your video. Didn't know how easy it was till I saw you do it. Unbelievable I was gonna buy a new washer but thanks to you I saved hundreds of dollars. Thank you for making this video.
@DuctTapeMechanic Жыл бұрын
Glad to help! Good work on getting your machine going!
@noemaye1773 Жыл бұрын
I have the same washer and I checked everything u checked and I still can’t find the problem on why my washer isn’t spinning is there any other video I can watch? My belt was good and everything else was good too
@richardmartin24715 ай бұрын
Where'd you get the belt 😊
@alexanderfassbender6686 Жыл бұрын
Great video. Have that "not spinning" problem right now. Will run through the tests and use your guidance to see if I can sort it out. On a previous repair effort of this same washer I found a part of a zip tie about 1.5 inches long that had slipped through the holes in the drum and lodged vertically in the motor volute. That stopped the impeller from turning and it would not drain. Took out the zip tie piece and it worked great until this latest challenge.
@DuctTapeMechanic Жыл бұрын
Best of luck in your repair! Seems like you got a good handle of things!
@montinorris7740 Жыл бұрын
How can you check "continuity" ?
@cynt344 Жыл бұрын
Great video!! That seemed too darn simple. Thanks for the heads up about the capacitor and the electical charge. I'm tired of spending money on these so called home appliance insurance companiea sending out techs who know nothing other than collect my deductible. Your video gives me confidence to check my own washer with hopes of fixing it myself. I look forward to checking out your other videos.
@DuctTapeMechanic Жыл бұрын
That was the goal! To show people that a lot of washer/dryer repairs are simple enough to do yourself. Thanks for watching! Best of luck in your repairs!
@H2OMANLV6 ай бұрын
Thanks for the video! I just fixed a neighbors GE washer with the same problem, a shredded drive belt, though not nearly as bad as yours, but enough to get me to check it and sure enough, it was in 2 pieces!! Thanks for the tip!!
@DuctTapeMechanic6 ай бұрын
Glad to help!
@JackFrost-cj2cw3 ай бұрын
My GE washer was not spinning to full speed - only half speed. I suspected that the timer wasn't switching the motor to full speed but didn't want to risk $300 cost of a timer vs a new machine costing $700. As a final try before I put the machine on the curb, I hit the timer about 5 or 6 times with a steel socket (not to break it but shake it a bit). I put the machine in spin mode, started, and voila! The machine was spinning high speed again! Thanks for these videos. They help us think critically through these problems!
@hectorm57172 ай бұрын
Where is the timer located? My washer spins for 5 seconds then stops (spin test). Thanks
@dimples59332 ай бұрын
Same ! I gotta try this
@ThanhNguyen-rg4tz5 ай бұрын
My washer had the same problem. Thank to your video, I was able to trouble shoot it. Save a lot of money to fix! Thank you so much!!
@DuctTapeMechanic5 ай бұрын
Your welcome! Glad to help!
@NotAVeryBigDill3 ай бұрын
I've never fixed anything in my life, usually I just break stuff but you just helped me fix my washer lol
@DuctTapeMechanic3 ай бұрын
Awesome! Glad I could help!
@tccmarkets16 ай бұрын
Yeah I gotta say, nice job on the video. You get right into it and show a lot of good troubleshoots. Much appreciated!
@DuctTapeMechanic6 ай бұрын
Your welcome!
@bertlamboy34142 ай бұрын
Outstanding my Man.Me and the Wife just fixed our washer together. No fighting LOL. Thanks👍
@DuctTapeMechanic2 ай бұрын
Fantastic! Always great to work together!
@Kschepis5 ай бұрын
We just checked our belt and it was the same problem! Thank you so much!!!! We REALLY needed it to be fixable!!!!!❤
@DuctTapeMechanic5 ай бұрын
That's awesome! Glad to help!
@Kschepis5 ай бұрын
Ok so the new drive belt just came, we ordered the correct belt but it seems a touch small, other videos say to use zip ties to stretch it? Or to heat it up? What do you do?
@DuctTapeMechanic5 ай бұрын
@kkqueen when they are new they are very tight. You may have to use a screwdriver to carefully pry it on.
@lillianspianojourney7 ай бұрын
Thank you so much for the video. We found that our three year old GE washer’s belt is completely broken.
@DuctTapeMechanic7 ай бұрын
Glad to help!
@kharrin0110 ай бұрын
Great Video! Very easy to follow step-by-step instructions. I noticed my GE Washer's spin cycle stopped working a couple weeks back and finally decided to look into what might be the issue. Hopefully I can potentially save some $$ if it was something you covered in this video...😃👍🏾
@DuctTapeMechanic10 ай бұрын
Best of luck!
@kharrin0110 ай бұрын
@@DuctTapeMechanic I'll be sure to drop you a line and let you know how it goes!
@JamesEavesJr7 ай бұрын
My belt was super greasy
@daxlance64922 жыл бұрын
Thank you for the helpful video and tips! I too have this GE washer and the same issues described by SaltyKayak. In the past, when the machine was new if it became unbalanced it would add a little water, agitate and attempt to rebalance the load itself. The spin cycle would wring most of the water out and it was great. Now when a load becomes unbalanced during the spin cycle the machine attempts to add water and rebalance, but it does not rebalance or complete a spin cycle. The water drains from the drum, but the clothes are sopping wet due to the lack of centrifugal force squeezing the water out. I have checked all the usual suspects for drainage problems (hose clogs, pump not working, etc.) and electronic spin cycle signals (like the ones listed in your video); they were all working properly. When I moved the washer to start taking it apart, there was a small pile of rubber-like shavings under the machine. A larger amount of the black rubber shavings were piled inside the wheel/transmission cover like an old pencil sharpener. I checked the belt and it seems to be in fair condition. It isn't frayed or worn unevenly. It did seem to have some sections where the black shavings had been caught in the belt grooves and the friction caused them to fuse to the belt- unless the shavings are from the belt. Is there another part that could be wearing and leaving the shavings under the machine?
@DuctTapeMechanic2 жыл бұрын
That is a bit strange. Perhaps inspect the groves on the motor pully to see if they are damaged and eating away at the belt. Maybe swap to a new belt and see if the symptoms go way (I think a new one is only like $20).
@daxlance64922 жыл бұрын
@@DuctTapeMechanic Thank you! I will post again after the new belt arrives.
@jeremyfreeman60322 жыл бұрын
@@daxlance6492 This is the exact issue I'm dealing with. I'll crack it open, wonder if mine has the same "shavings." If you figure it out I'd appreciate an update
@sharabutler20262 жыл бұрын
Did you ever find a solution? Mine is doing the same thing. I have ran 2 loads on normal and 3 drain & spin cycles to no avail! Its draining fine but isnt spinning. I finally pulled out 3 pair of jeans now anything is barely in the washer. Hoping it will be the trick but this happens atleast once a week and i shouldnt have to remove clothes to get it to spin out. Im not over-loading, either!
@kristahemingsen15792 жыл бұрын
Hi friends. Also, looking for some advice. My driver belt was shredded, but the pulley is locked. It won't spin all the way. Any ideas or helo?
@itchyblanket5508 Жыл бұрын
Dude thank you so much!! Bought this thing 3 years ago. Came home one night, did some laundry and it wasn't spinning. My heart dropped. I was so bummed. Like omg already? This thing was like over 500 bucks. Saw your video and it was the belt that slipped off underneath. You saved the day bro. Thank you and please keep making videos. If you find a water softer that you can fix or service ide love to see a breakdown of that. Mine broke and got stuck on regenerate so I bought a new one bc I didn't know my way around it. But I'm sure this new one will break eventually. Peace, and thank you for empowering homeowners everywhere.
@DuctTapeMechanic Жыл бұрын
I'm glad the video helped! I believe the washer still sells at home depot for around $600. It might not be a bad idea to keep a spare belt on hand. Thanks for watching!
@InformationIsTheEdge2 жыл бұрын
Thanks for the info! As my handles suggests, I dig that kind of thing!
@DuctTapeMechanic2 жыл бұрын
Thanks for watching!
@martinezjason70102 жыл бұрын
Thank you for making this video it helped me alot thank you
@tim4Jesus2212 жыл бұрын
This video is super awesome. The tech is awesome. Love this guy
@DuctTapeMechanic2 жыл бұрын
Thank you!
@BOHUNTER2 жыл бұрын
Appreciate the video. I too have no spin. Drive belt is good. Tomorrow I’ll remove the belt and see if the motor spins. Thanks
@DuctTapeMechanic2 жыл бұрын
Make sure to check if the lid switch is working as well! Best of luck
@talouch20072 жыл бұрын
@@DuctTapeMechanic thanks for the Video. I bypass the lid switch on the same machine that yours by connecting the two wires that on the side but I still have no spinning even though it’s agitating. I have an error with lid lock any way to be successful without changing the lid switch?
@MickeyDoo143 ай бұрын
Saved me a huge headache with this one. Thank you for the video!
@DuctTapeMechanic3 ай бұрын
You're welcome!
@makerwright7 ай бұрын
THANK YOU!!! BAD BELT REPLACED AND SHE'S FIXED!!!
@MegaFlower507 ай бұрын
Thank you Young Man❤ you saved this Old Granny's Washing machine! New Fan here🎉
@DuctTapeMechanic7 ай бұрын
Glad to help! Great job doing it yourself!
@ambyg720 Жыл бұрын
I fixed the same model GE washer three times just from this video. Two times were resetting the code this time I think it's the belt. My husband bought me a speed Queen for Christmas so I'm not anticipating any repairs knock on dryer Lint.... This has me thinking about slapping on a new belt and throwing it on marketplace and getting my money's worth from it. 5 years old over $500
@DuctTapeMechanic Жыл бұрын
Lucky you! Speed queen is definitely the cream of the crop!
@HarwoodGarland Жыл бұрын
This video helped me solve my problem. It was my drive belt. Thank you.
@DuctTapeMechanic Жыл бұрын
That's awesome! Great job
@lovelykem072 жыл бұрын
I was so irritated with mine I just replaced my drain pump ($23 on Amazon) and now my washer isn’t spinning I was about to give up and just buy a new one glad I looked up this video…..I’ll definitely check the belt mine is a little older GE (it has 3 knobs)……repairs cost just as much as a new one these days…..you might just saved the day for me……I had no issue with my washer until after I had it in the storage for 15-16 months so it’s all new to me!!
@deerice61312 жыл бұрын
Great video!! I appreciate how you went through the trouble shooting process.
@willmills137010 ай бұрын
Off to check my lid switch and capacitor. Belt is good and drain hose isn't plugged. AEfactory service technician came and replaced the agitator for a new one for $45. I'm not gonna use the warranty for this again. Thank you for the video!!
@DuctTapeMechanic10 ай бұрын
Best of luck!
@G2bb101 Жыл бұрын
Thanks for the vid, way cheaper than paying a mechanic!
@DuctTapeMechanic Жыл бұрын
Glad to help!
@brookemickalowski84916 ай бұрын
Don’t got someone to teach me and I don’t have money to throw things away so here we are! Thanks 🎉
@DuctTapeMechanic6 ай бұрын
Your welcome!
@DieselsAndGuns8 ай бұрын
Thank you so much for the free knowledge. It was the belt for me.
@DuctTapeMechanic8 ай бұрын
Your welcome! Glad i could help!
@alduff229 Жыл бұрын
Our machine had a lid lock failure we think. But I now know how to check it from your video. Thanks
@DuctTapeMechanic Жыл бұрын
Awesome!
@ACP16092 жыл бұрын
Great video. Taped under the machine is the owner's manual, it has a way to check diagnostic codes. It includes what the codes mean and how to reset or fix them. I'll definitely try the tips in the video though as I lost my owner's manual 🤣
@Android_Warrior2 жыл бұрын
It's not an owners manual, it's a tech sheet for the repair man.
@geodescent Жыл бұрын
Both the owners manual and diagnostics book are on ManualsLib
@jnpe7777777 Жыл бұрын
God bless! Thank you for making this video. Very helpful 👍
@DuctTapeMechanic Жыл бұрын
Glad to help!
@TheRevoltingMan6 ай бұрын
Thank you very much! You solved my problem and saved me a lot of money!
@emilymckissack6530 Жыл бұрын
Thank you. I learn a lot from you .
@DuctTapeMechanic Жыл бұрын
Glad to help!
@benjaminhatcher6755 Жыл бұрын
Amazing that people would rather send a good appliance to a land fill instead of a simple repair! Thank you for this info!
@DuctTapeMechanic Жыл бұрын
You would be surprised how many washers and dryers I find that just need simple repairs! Occasionally its more complex like bad bearings or bad transmission but most of the time it's not. Thanks for watching!
@dhollis26 Жыл бұрын
Yes cause everyone just has the electrical knowledge and required meters lying around. Be nice if manufacturers would stop making junk that breaks in 16 months.
@JoseyWales44s9 ай бұрын
Great video. Have the same washer and the same problem. Will check it tomorrow.
@DuctTapeMechanic9 ай бұрын
Best of luck!
@JustinBoyd96Ай бұрын
Very helpful! Great video! Thank you!
@jeremymcclanahan238920 күн бұрын
Thank you for this... was able to troubleshoot this exact washer that I own...bad lid switch
@DuctTapeMechanic20 күн бұрын
Awesome! Great job!
@mrspydad87333 ай бұрын
Great video. Fixed my problem and saved me money! Thank you.
@DuctTapeMechanic3 ай бұрын
You're welcome! I'm glad it helped!
@josemahabirsingh5420 Жыл бұрын
Thanks for your help!!! This video is perfect I fixes mine in about 30 minutes
@DuctTapeMechanic Жыл бұрын
Your welcome! Good work on getting it repaired!
@michaelraypick1444 Жыл бұрын
THANKS GOOD SIR, YOU JUST GOT YOURSELF A SUBSCRIBER👍👍
@DuctTapeMechanic Жыл бұрын
Thank you!
@cbax2869 Жыл бұрын
Thank you so much! I'm not a Mr Fix It by no means but this video just made me look like one in the eyes of my kids! We had the same issue with our GE washer today and this video make me look like Mr Dad The Fix It Man!
@DuctTapeMechanic Жыл бұрын
Hey thats great to hear! Good work
@rlovek19882 жыл бұрын
You’re a genius 😩
@txaggie1991 Жыл бұрын
Thanks for the clear video!!
@DuctTapeMechanic Жыл бұрын
Thank you!
@InTotalKaos4 ай бұрын
Really good job at explaining everything! 👍🏾
@DuctTapeMechanic4 ай бұрын
Thank you!
@jamesuthman89312 жыл бұрын
Belt good, Continuity, fills and drains. But will not agitate or spin. I even replaced the board. Same model as the one in your video.
@jamesuthman89312 жыл бұрын
It fills with water sits and then drains..
@bobbyrichardson27362 жыл бұрын
Speed sensor on motor my friend. That’s what I’d try.
@lanavillafana26782 жыл бұрын
I have the same problem ...any luck now?
@valev57052 жыл бұрын
Gracias señor!!
@v-8juice11 ай бұрын
Thanks, good info! If it's a belt issue, where does one get a new belt and how does one know what size. type etc of belt to get?
@vishawpalrandhawa95622 жыл бұрын
Excellent video.thanks
@DuctTapeMechanic2 жыл бұрын
Your welcome!
@cleric6708 ай бұрын
My lock switch had dirty contacts so it was sending a really high resistance value of around 70ohms back to the board, or an open circuit. The machine will NOT go into spin cycle if it doesn't read the lid is actually locked, you can disassemble the switch from the housing and use some 800 grit sandpaper to polish the contacts, they're under a little copper spring bar that you lift up once the switch itself is disassembled. Fortunately there's no parts that fall apart or jump out from this disassembly, just takes a tiny flat blade precision screwdriver to pop the switch out of the housing then take the cover off the switch. Make sure to leave the switch in the UNLOCKED position, there's a little slot on the back of the switch itself you can operate to lock/unlock by pushing it straight in, one press locks, another press unlock the switch. Makes sense how it works when you have it disassembled, you can tell if the switch is in the unlocked position because the little square plug on the bottom will be flush with the housing, in the locked position that square plug is extended a couple mm. If you don't have it unlocked you won't be able to close the lid of the washer once it's assembled.
@Muftobration9 ай бұрын
That ping sound at at 9:08 was so perfectly timed.
@rafaelretiz6267 Жыл бұрын
Great Video!! Thank you so much for it.
@DuctTapeMechanic Жыл бұрын
Your welcome!
@mxqy2 жыл бұрын
To fix a no-spin GE washer, what you need can be a simple reset. This can be done in 2 minutes. See this video kzfaq.info/get/bejne/j8B7pNOgu76XpGg.html
@DuctTapeMechanic2 жыл бұрын
Yea I recommend a reset, particularly if you suspect a main control board issue. However if you have a broken belt a reset isn't going to do much.
@christinatorres4872 Жыл бұрын
U are GENIUS!!!!!!! 😮 thank uuuuuuu
@DuctTapeMechanic Жыл бұрын
I'm glad it helped!
@rescueistheway4470Ай бұрын
A lot of times we just don't have the help to move it ..I'm going to find help..I feel confident I can do this as a woman....THANKS FOR THE KNOWLEDGE
@allencollins98412 жыл бұрын
Awesome thanks I have the same model and the belt is shredded just like your video cheep easy fix!
@DuctTapeMechanic2 жыл бұрын
I'm glad you got yours working!
@MrWellyeah11 ай бұрын
Broooo that was my issue the belt was torn apart!! just ordered replacement part 290D1101P005 belt - Thanks man
@DuctTapeMechanic11 ай бұрын
Awesome! Glad I could help!
@trishabee2229 Жыл бұрын
Fantastic. Fixing my washer with my son. Hopefully it works
@DuctTapeMechanic Жыл бұрын
Good luck!
@raidergil6005 Жыл бұрын
Thank god I found your channel 🎉yeeeee. Thanks bro
@DuctTapeMechanic Жыл бұрын
Glad you found the channel to be helpful!
@user-oy1xh2um1g6 ай бұрын
Thank you for this video-fixed our washing machine for the cost of a belt ($12)! Truly grateful to you!
@DuctTapeMechanic6 ай бұрын
Your welcome!
@Junkboy888 Жыл бұрын
LOL My washing machine is holding all my socks hostage in a sloppy wet mess lol . Thanks for the video. I have a magnetic switch for a Door safety so I ruled that out. So I know what I will be doing this weekend.
@DuctTapeMechanic Жыл бұрын
I'm guessing you have a older ge/hotpoint washer. Those magnetic door switches are notorious for going bad as well as the motor capacitor
@Junkboy888 Жыл бұрын
@@DuctTapeMechanic I use a Magnet to start the machine with lid open, The Spin cycle will run with all the socks out and water out, the Pump did take the water out and the washer agitator works so the motor works. So Im guess clutch. But have a question Is the Capacitor used only in the higher speed like Spin?
@DuctTapeMechanic Жыл бұрын
@@Junkboy888 i norder for the motor to work current has to go through the capacitor. Sometimes when capacitors began to fail they will work with no load (no laundry or if the motor is turning by hand) but will not work when there is a load (I would check that first). But yes it could be a bad clutch or even bad motor.
@robert102743 ай бұрын
Thanks for the help I found a piece of clothing on mine awesome video
@bgregg557 ай бұрын
They used to make appliances that lasted for decades. Now they have failure points designed in to keep us suckers on the hook. My newest appliance was made in 2005 & I fully intend to keep all my current ones.
@terryfoster3460 Жыл бұрын
Excellent job!!
@DuctTapeMechanic Жыл бұрын
Thank you!
@SuperSquirrel19802 жыл бұрын
Thank you very much.
@jimcarroll5283 Жыл бұрын
Great Vid ......Thanks for " The Skills"
@DuctTapeMechanic Жыл бұрын
Thanks for watching!
@TheGrotfarmerАй бұрын
This man is a wizard.
@sktbrd13gy1 Жыл бұрын
Good evening, I have the same washer and wanted to ask what belt model # did you use and where did you purchase it from? Thank you for your helpful video.
@allisonlinder88872 жыл бұрын
Hey I have a GE washer wlsr3000g5ww and I have to reset it after every wash or it wont make it thru the rinse and spin cycle. Any ideas on what is causing this it has worked great we bought it used no problems for four years and now this.
@KNIGHTRACEDOTCOM Жыл бұрын
EXCELLENT VIDEO BRO !!!!!!!!!!!!!!!!!!!!
@DuctTapeMechanic Жыл бұрын
Thank you!
@KNIGHTRACEDOTCOM Жыл бұрын
@@DuctTapeMechanic I subscribed
@abrahamvaro5482 Жыл бұрын
Very nice video ,thanks!!
@DuctTapeMechanic Жыл бұрын
Glad you liked it!
@ejharrop14164 ай бұрын
I have a similar set of GE washer/dryer. I am looking to sort out an issue with the dryer sensing rails. They are slightly warped and have a gap underneath. Fabrics get caught and the dryer never shuts off. Do you have a suggestion or video for a fix? Sorry to hear that they are not good, like so many are. Enjoy your videos, thank you.
@peaceridge2 жыл бұрын
what did you use to take off the bolts at approx 6 min 45 secs?
@danielbaker716 Жыл бұрын
I have a GE GTW330ask4ww toploader... less than 10 years old, and it will not finish high-speed spin cycle anymore. Clothes are sopping wet. Seems to generate out-of balance error and stop even when load is not too big and seems reasonably well balanced when I spin the tub of wet clothes by hand. I have replaced the suspension rods.... it there anything to check that may improve balance or enable high-speed spin ?
@kaltrex94656 ай бұрын
My model is GTW500ASN0WS, serial LR999206G, and I’m probably looking at electrical damage underneath from a basement flooded and got a foot tall of water that affected the bottom part of the washer. I’m trying to figure out would need to be replaced? I opened and closed the lids six times I unplugged the machine for a minute, I press the buttons for the wash cycle it makes a noise, but then it does not show the fill button light, gyrates for a second, and does not jet water out and then makes the finish button noise three minutes later
@imjabroni12 жыл бұрын
Not spinning is a pretty general symptom, caused by belts, and other factors. Mine was a tub level air dome clogged up. It's a chamber the size of a pack of smokes with a hose connection on the side of the tub. The washer was overfilling, and emptying out the water and just sitting there running the pump after it was already empty, never running the spin cycle and shutting down. Blew some air into it to blast the crud out. works great now. Hope this helps others. LMK
@DuctTapeMechanic2 жыл бұрын
Dirty pressure hose classic cause of an overflow. Nice job!
@fernandopalacios2399 Жыл бұрын
Hi. So when you said you blew it out, were you purging the hose or the box?
@imjabroni1 Жыл бұрын
@@fernandopalacios2399 I meant purging the box. It blows the crud back out into the tub, so it helps to have water in it. I used a small air compressor of course. I suppose lung power could also help, to a lesser degree.
@fernandopalacios2399 Жыл бұрын
@@imjabroni1 appreciate the reply
@takchan4832 Жыл бұрын
Thanks man, I fixed mine same problem.
@DuctTapeMechanic Жыл бұрын
Awesome!
@raulescobar7433 Жыл бұрын
very helpful, thank you
@DuctTapeMechanic Жыл бұрын
Glad it was helpful!
@coolelectronics1759 Жыл бұрын
Wonder if this would apply to a frigidaire gallery model
@kevinhocker5451 Жыл бұрын
I have the exact same washing machine Except it has a, intimented no spin I doubt it's going to be the belt it has worked for a week and then now again today it's acting up again . I will go through your test my lid light shows to be on but I will test that and the Capacitor if my multimeter will allow, hopefully I get lucky any ideas would be greatly appreciated