Waterdrop G2 P600 Reverse Osmosis System Installation

No video

Waterdrop G2 P600 Reverse Osmosis System Installation

Рет қаралды 27,087

Күн бұрын

Buy it 🛒 at Amazon: amzn.to/34roHyk
Diamond 💎Core Drill Bit: amzn.to/3gjDA7X
Adapter for drill: amzn.to/3gnDNXX
This is an installation overview of the Waterdrop G2 P600-W RO water filtration system.
If you're looking at the Waterdrop G2, the G2 P600-W is the same model base with a slightly higher flow rate. I highly recommend the faster flow rate if your budget allows.
Features of the WD-G2 P600-W
⭐ Under Sink Reverse Osmosis Water Filtration System WD-G2 P600-W
With Waterdrop’s improved water purification technology, the G2P600 RO system can meet the water needs of large families and even small businesses.
⭐The composite filters have more effective filtration, removing more than 1,000 contaminants.
⭐ As an upgraded filtration system, the G2 P600 RO system has a fast water flow rate of 600 GPD. Dispensing 2 cups of pure water will produce only 1 cup of waste water, saving 600% more water.
⭐This tankless design saves 70% of your under-sink space and prevents recontamination.
⭐The advanced integrated electrical and water circuits reduce leakage.
#Waterdrop #ReverseOsmosis #DIY
If you find my videos useful, please consider buying me a coffee! www.buymeacoff...
Note: NEXGENHAB is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to amazon.com and any other that may be affiliated with Amazon Service LLC Associates Program. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.

Пікірлер: 78

@rogerbivins9144 2 ай бұрын

If anyone is looking here for help, drilling the hole doesnt need to be difficult when using the right tool. All you need is a hole saw with a pilot bit made for stone / concrete / granite. The small pilot bit in the center is slightly longer and easily keeps the core bit from wandering as it enters the surface. The bit used in this video could also get the job done, but you would first need to drill a hole thru a 2x4 or piece of plywood that you could clamp to the surface to guide and keep the bit from wandering until it has begun boring.

@TexasRanchu 2 жыл бұрын

That's the cutest baby!!. I missed the days when my boys were that young

@kentahonjo7180 2 жыл бұрын

Thank you! Yes, precious times...

@ianbuick8946 3 жыл бұрын

best part of the video: hiring pro to do the drilling. Thanks for sharing!

@kentahonjo7180 3 жыл бұрын

haha, you live and you learn...

@agqdeals6147 Жыл бұрын

Nicely done! I am about to install one in the basement and feed the pantry, fridge and island kitchen sink. Hopefully it has enough power to push water up 25-35feet.

@kentahonjo7180 Жыл бұрын

Thanks! Hope it works out for you!

@Environs 2 жыл бұрын

You need a center drill for that drill bit, then it much easier to hold centered

@gr8ride411 3 жыл бұрын

Enjoyed watching this since I'm close to installing one. It looks like the hole drilled could have been a lot smaller, like 1/2" maybe, did the instructions guide what size you drilled into the counter? We have a granite countertop as well so I'm watching a bunch of these videos. 👍🏽

@kentahonjo7180 3 жыл бұрын

Yes, you can certainly go smaller for this installation. 1/2" might be too tight, but I don't recall the instruction manual saying anything about a recommended drill diameter. If you haven't already, I'd suggest you get the Waterdrop first and then measure. Should've done that in the first place SMH, haha.

@nigelfoulds284 Жыл бұрын

I agree smaller hole. Only reason for larger hole is preassemble, feed all in from top. Then slide split washer on underneath... Great vid, bit scary at times 😲😉

@jondoe9596 6 ай бұрын

Thanks for the review and instructions. The pass-through metal bolt for the faucet doesn't look that big. You could have gotten away with a half-inch hole instead of the suggested 1.375.

@tarado96 3 жыл бұрын

Good job, my man. Yeah, I haven't installed mine yet cause that counter drilling is not an easy thing for a nonprofessional.

@kentahonjo7180 3 жыл бұрын

Thanks!

@MarianoPerez 2 жыл бұрын

I'm thinking of installing this system. We currently use those Brita filtered pitchers. How do you like this system overall? How is the taste of water? Is there anything you dislike about it?

@kentahonjo7180 2 жыл бұрын

So far no issues with my system! The water still tastes the same as it did on the first day. I know my espresso machine is loving the limescale free water as well!

@haystacksjalisco 4 жыл бұрын

What is the water output flow like? Could you make a video showing how long it takes to fill a measuring cup? That would be super helpful for me.

@kentahonjo7180 4 жыл бұрын

No problem! Once I shoot the video, I'll post it and let you know.

@kentahonjo7180 3 жыл бұрын

Here you go: kzfaq.info/get/bejne/idGKi92qu7m3loU.html. Good news is, it's faster than what Waterdrop advertises. It'll surely depend on how much water pressure you have at the faucet, but you can probably estimate using my video.

@crazygravy437 3 жыл бұрын

Fortunately for me, I have a hole for a soap dispenser that we seldom used!

@kentahonjo7180 3 жыл бұрын

That makes life a bit easier :)

@brynnemberton9453 4 жыл бұрын

Keep it up I like the video!

@kentahonjo7180 4 жыл бұрын

Thank you, Brynn!

@a.k.salazr 3 жыл бұрын

For those who don't want to drill a hole in their countertop, there are also faucets with integrated water filter faucets (2 in 1) . My question is, if you move and want to take the system with you. How do you "clog" (for lack of a better term) the draining hole?

@kentahonjo7180 3 жыл бұрын

Hey Karen! Thanks for the tip about the 2 in 1! Regarding your question, I think the best way to cover up the hole is to use one of these: amzn.to/2SxuzPn. It’s not the prettiest thing, but it’ll do the job.

@a.k.salazr 3 жыл бұрын

@@kentahonjo7180 Thank you so much for your reply! I will try that

@guidedbygreen1480 3 жыл бұрын

@@a.k.salazr for those kinds of faucet, if you remove the RO unit and shut off the source water valve. There is nothing else to do.. right?

@TheLovey22 3 жыл бұрын

How is it working one year later? How often do you need to change the filters? Any issues getting filters?

@kentahonjo7180 3 жыл бұрын

It's working great. I haven't had any issues and haven't had to change the filters yet. We use it daily, so we should be due for a change, but I'm relying on the filter change indicator, and that hasn't prompted me to do so.

@KD-gn4hv 3 жыл бұрын

How frequently are you changing out the filters? And about how much do the replacements cost?

@kentahonjo7180 3 жыл бұрын

Haven't had to change out the filters yet (6 months of operation). I'm keeping an eye out on the filter indicator, but so far no issue.

@rickp5987 3 жыл бұрын

Most ROs are once a year. I just installed my g2. Looks like around $75

@friednoodleXX 3 жыл бұрын

Hi, thanks for the video. Did you see a huge water and electric bill increase after using this filtration machine for a month?

@kentahonjo7180 3 жыл бұрын

Great question... I've been wondering that myself. I haven't noticed any huge spike in water or electricity usage, but I want to someday get a more definite answer to this. The water bill is actually not that bad, and drinking water is only a small percentage of the total water usage, so I'm not worried about that. Waterdrop also advertises that it's a 2:1 drain ratio (2 glasses of clean water, 1 glass down the drain), so you can calculate it that way as well. Measuring electricity usage is a bit tougher, and I would have to get an energy meter to really see how much power it's using. Until I get one, I'm thinking of conserving energy by hooking up a smart plug so I can automatically turn it off when everyone's sleeping. That being said, I don't think you'll see a huge increase in your utilities just because of this machine. Seems pretty efficient.

@dylan-nguyen Жыл бұрын

It bothers me so much that the faucets are not in line with each other… 😥 Seems like it’s impossible to fill a big water bottle because the stream barely hits the sink

@BabscoSales 2 жыл бұрын

Many hole saws come with a place to put a drill bit in the center of the hole saw to use as a guide for the hole saw, this manes for a much cleaner hole, just saying. I enjoy your videos.

@kentahonjo7180 2 жыл бұрын

Thanks for the comment! Yes the hole saw I bought did have a drill bit in the center, but that kept slipping... Should of took the time to do a pilot hole.

@kral9398 3 жыл бұрын

Wish i can buy in the US store. More than 25% more expensive to order in Canada!

@kentahonjo7180 3 жыл бұрын

Wow, that's quite a bit higher! Hope you can get a good deal when it's on sale.

@Chris-zu4es 23 күн бұрын

why was it warm? was that just after the 30min rinsing or is it warm still?

@CannaKen 3 жыл бұрын

I just got this and love it. Would you know how to turn off the automatic shut off to this system?

@kentahonjo7180 3 жыл бұрын

Awesome! I've tried looking up the automatic shut off, but can't seem to find it... Could you please elaborate? Mine is on 24/7, and water flows whenever I turn the faucet on.

@guidedbygreen1480 3 жыл бұрын

This unit does not have a reserve tank and is on demand filtered water. Aside from this an ASO(automatic shutoff valve) is just that ... Automatic .

@Mrshyguy775 3 жыл бұрын

Any reason you didn't just use the hole from your air gap and use a high loop instead? Looking to install this but don't want to drill a hole.

@kentahonjo7180 3 жыл бұрын

No real reason other than it sounded like a good excuse to drill a hole into my countertop (I've always wanted to know how hard it was... learned the hard way🤣)! I'm not 100% sure on the actual procedure, but using a high loop seems like a good alternative. Let me know if it worked! Good luck :)

@RexLorenzo 3 жыл бұрын

Your said the water comes out warm? Is that just because it was done with the initial cleaning cycle or is it always slightly warm?

@kentahonjo7180 3 жыл бұрын

Yes, I think that was just the initial cycle. The water that comes out now is the same temperature as the tap.

@PauZakArtist 7 ай бұрын

it's amazing how you just plug the tubes without any fixation into the unit (?) and no water is escaping while using it...? I have a phobia that something would start leaking eventually with so many connections (I'm linvin in a several storage apt.) -_-'

@MrTk3435 2 жыл бұрын

🔥☃️🎄Kenta, Great Job! Very helpful. Can you do GP800?🎄☃️🔥

@kentahonjo7180 2 жыл бұрын

If I magically get a GP800, I'd be happy to do one, but satisfied with what I have now!

@immunity4soul 4 ай бұрын

Did you have to make the hole that big? Looked like the diameter of the faucet was only half inch. I have this system new in box and the hole is making me nervous. Dont think you needed to do 1 3/8. Anyways thanks doesn’t look that intimidating now that i saw your video. Baby is cute. I have two that age dont want them to grow up they like cartoon characters :)

@Desertburro21 3 жыл бұрын

Does the unit make a lot of noise when using the tap?

@kentahonjo7180 3 жыл бұрын

I wouldn't say it makes excessive noise, but it's definitely not silent. It's only audible when you turn the tap, and since it lives underneath the sink (the sound is attenuated quite a bit), it doesn't bother me.

@guidedbygreen1480 3 жыл бұрын

Ah man I hate those air gaps.. could've been a great hole. But it's prob required in his area

@jdugg227 3 жыл бұрын

I’m goin’ for it! I don’t see the drill bit link though.. am I missing it?

@kentahonjo7180 3 жыл бұрын

That's awesome! I don't think you'll regret it! The drill bit link should be in the description, but here it is anyway: amzn.to/3gjDA7X . If you're adapting to a drill, don't forget the adapter: amzn.to/3gnDNXX . Thanks for supporting my channel!

@neelpatel3844 Жыл бұрын

How much noise does the unit make. I had one installed and don’t know if the sound is normal or not.

@kentahonjo7180 Жыл бұрын

Relatively speaking, it seems quiet to me... But without a video, it's hard to tell

@neelpatel3844 Жыл бұрын

@@kentahonjo7180 I’ll record it and post the link here, would you be able to let me know what you think?

@MrTk3435 2 жыл бұрын

🧐😁Kenta, What is that colorful thing you used before drilling? Thank 😁🧐

@kentahonjo7180 2 жыл бұрын

haha, that was my kid's Play-Doh!

@misukxri 3 жыл бұрын

I'm planning on drilling a hole in my counter do you have the link for that sticker guide?

@kentahonjo7180 3 жыл бұрын

The sticker guide was included in the kit. If you don't have one, just a bit of tape should work.

@KD-gn4hv 2 жыл бұрын

Hey so this video has been up a while now. Was wondering how the system has been working for you? Do you still recommend it? Any pros/cons you can share? I'm thinking about buying one for my house. Thanks!

@kentahonjo7180 2 жыл бұрын

Hey KD! It's been great so far. Water tastes good, and it continues to operate without any issues. Definitely recommend.

@aczirbo70 3 жыл бұрын

You did bed with that hole water faucet. It's enough just 3/4 of inch

@kentahonjo7180 3 жыл бұрын

Yep!

@toostrange9357 2 жыл бұрын

Isn faucet metal or plastik?

@kentahonjo7180 2 жыл бұрын

Faucet is metal

@Registered55 2 жыл бұрын

If only they could find a way to reduce the 30 minute wasted water.... 30 minutes! It's so much

@kentahonjo7180 2 жыл бұрын

Agreed!

@youtubersome5379 3 жыл бұрын

Thanks, probably going to hire some professionals instead myself

@kentahonjo7180 3 жыл бұрын

Probably a wise decision :)

@FactsMattersUSA 3 жыл бұрын

Dude, you ruined your counter top, definitely used the wrong drill bit. They make special diamond bits for granite with a center bit to avoid scratching the surface like you did. Holy crap. Granite is not cheap

@kentahonjo7180 3 жыл бұрын

Haha, I know, it's pretty cringe-worthy even for me. You can bet I won't be doing that next time! If you have a recommendation for the drill bit, let me know and I'll update it in the description.