Waterdrop G3P800 RO Installation

Рет қаралды 25,799

Күн бұрын

The system features not only powerful 3-stage filters, extra layer of scale inhibitor inhibits water scale effectively. Powerful 7-layer of RO membranes reduce chlorine, heavy metals, and other contaminants present in water. This reverse osmosis water system tankless adopts advanced water dispensing technology, saving 12 times of water. It uses up just a cup of wastewater for every three cups of filtered water produced.
0:25 Install feed water adapter
1:16 Install the faucet and UV sterilizer
1:49 Install drain saddle
2:23 Position the RO system
2:49 Connect tubing
4:12 Connnect power cord
4:52 Install filters
5:23 Start up the system
You can click bit.ly/42ia9v4 to get more information about the product!

Пікірлер: 23

@KrishnaBoppana Жыл бұрын

Will this installation pass house inspection and compliance code?

@mita7141 Жыл бұрын

Hello, Does it make sound each time One use to fill a glass of water? or the flushing did not complete ?

@kim0mook Жыл бұрын

It does for me. We noticed the more we use it the more often it filters

@preetikakade7132 Жыл бұрын

We just have one power outlet that is connected to the garbage disposal. In order to use the RO system we need to discinnect the garbage disposal. Is there a easy alternative to this issue?

@waterdropfilter.official Жыл бұрын

Hi, Thank you for contacting us. I apologize for any inconvenience that may have caused you. In order to provide proper assistance to you, could you please contact us via the following email? Thank you. service@waterdropfilter.com Enjoy the rest of your day! Kind Regards Mia Lauren Customer Service Rep

@kilozap Жыл бұрын

Honestly if it's connected to the GD then you aren't going to have a good experience since that is presumably on a switch - an electrician can install a second 'dedicated' outlet, which you'll need

@InarusLynx 3 ай бұрын

Look up kitchen split recepticatical outlet. Please be careful to turn off the breaker while modifying the outlet as it's 120v or higher. It was easy for me, but I've worked with electricity for 10+ years.

@giaspadaro 2 ай бұрын

The mnr must be before or after uv filter

@waterdropfilter.official 21 күн бұрын

after the uv filter

@satjosh101 2 жыл бұрын

Where would I put the Mnr filter

@rafars2246 2 жыл бұрын

Wherever it pleases you

@someshpurohit7503 Жыл бұрын

Before UV and output of RO to input of MNR. 1/4 pipe from faucet needs to be cut to do this fitting.

@someshpurohit7503 Жыл бұрын

and then output of MNR to input of UV. output from UV goes to faucet.

@pratishpatel26 Жыл бұрын

it’s really difficult to insert drainage pipe in whole

@waterdropfilter.official Жыл бұрын

Hi, I'm sorry for the inconvenience caused; please note that the drain saddle has been updated but the user manual is still the old version. The tubing does not have to go through the drain saddle in this case, thank you for your understanding. If you need further assistance, could you please contact us directly, thank you. Email: service@waterdropfilter.com TEL: 1-888-352-3558

@Houstonian343 Жыл бұрын

Might want to update your video and instructions -put a sticker on the box and send to website for updated instruction.

@Houstonian343 Жыл бұрын

Also helpful to advise one to MARK spot on drain tube thru access for accuracy since red tube not going thru

@waterdropfilter.official Жыл бұрын

@@Houstonian343 Hi, Thanks for your valuable feedback, I will relay them to our related department for processing, thank you so much!

@vitaliestirbu9607 Жыл бұрын

@@waterdropfilter.official I had same problem , spent over an hr trying to understand what I am doing wrong. I am about to send it back. Update your video/manual

@PlagueDoctorInc Жыл бұрын

This video leaves a LOT to be desired. No close-ups of parts, major assumptions made on things fitting together smoothly, and narrated by a robot. The epitome of doing as little as possible as cheaply as possible.

@DrChappyWood 7 ай бұрын

Firstly, the robotic narrator said "firstly" 10 times.😅