Get a smart plug for your garbage disposal and problem solved. I just have Google control my garbage disposal now via the smart plug.

Love that! @@sonicpop

Thanks for sharing!

Unfortunately this is the case for many filtration systems, every brand has their own filter cartridge design.

the Waterdrop D6-MZ is normally $388 but is on sale for $318 right now,

There are plenty of more standard tank incorporated units that have standardized filter housings. I used the Apec one in my old apartment for years with great results. 👍

I've tested two Waterdrop RO systems so far, neither leached methylene chloride aka dichloromethane or xylenes: G3 P800 kzfaq.info/get/bejne/e8idZr192qvJp2g.html N1 kzfaq.info/get/bejne/otOHe8ZysLebm58.html Currently testing the new X12 model - interested to see if these detections show up or not

@@waterfilterguru Thank man...we currently have the G800 and this is our second waterdrop system so we are concerned #parentlife #girldad. Check out the review by BOS Water (?) they seem like good folks and the response from Waterdrop was pretty shady...again, thanks for your work and we are crossing our fingers this is just an isolated incident due to bad filters or something.

@@Truth1444 Yeah, it's hard to draw conclusions from one isolated test, unfortunately. But still, very concerning I 100% agree with you

@@waterfilterguruhave you put out a video on the results of the X12 RO system?

Sounds super frustrating! Did you identify an alternative option?

You're welcome! Let us know how it goes - we'd love to hear how the installation process is, and how you like the system and water after it's up and running

@@waterfilterguru My family and I have been drinking distilled water for the past 20 years. I've grown tired of cleaning the distiller every other week as well as the electricity it cost me since it runs about 8 hours a day to support four people. I'm pretty sure that reverse osmosis will not be as pure as distilled, but it will be very close and as long as the water tastes good which in my opinion means it has no taste, I will be happy. I find it ironic that some people complain that RO and distilled water removes all the minerals from it and you have to put it back. I believe you should be getting your minerals through the food you eat and not necessarily the water you drink. If you want the minerals you can just add a pinch of sea salt to every gallon of water you make and that should suffice. Again thank you so much for your video it was very informative and I'm glad I saw it to make the purchase.

@@Dabobeans You're right on point! An RO will definitely be less work, and you'll get the purified water on demand 😉

Typically we think of mold/ bacteria growth happening the the filtered water tank of RO systems that have one. Not so much a problem with tankless systems, but that's not to say it cant happen.

@@waterfilterguru HOW DOES THE UV HELP WITH THIS?

@@jeremiah888888 If bacteria or mold do grow in the system, the UV will destroy them as the purified water leaves the system. The UV is installed on the waterline between the system and the faucet

Thanks for sharing! Love the styrofoam hack to stop the noise, great idea!

Yes, reverse osmosis should reduce radium. The only zero plastic systems I've come across are the stainless steel gravity fed systems

Yes, we actually asked Simplelab to clarify this and they did. They responded to a comment by Big Berkey Water Filters with an explanation from their science team

Test results live! kzfaq.info/get/bejne/e8idZr192qvJp2g.html

Thank you - lab results coming soon!

@@waterfilterguruI’m watching and waiting for the results too!

@@samburchard1778 Coming soon!

Lab results - best part of the channel. Shows objectivity and removes any feeling that it’s just another sponsored or paid advertisement. Don’t know how much the tests cost but they’re the reason I watched two more of your videos. The first one had the water tests, last two videos I watched did not. Bummed.

@@aherweck22 Hey thanks for your comment - lab testing is in the works! We decided to split out the lab results for each product review into its own video so that each are shorter and easier to watch - just an FYI why you haven't seen our lab test data for a few of the most recent reviews.

Hey Kelly, thanks for the comment! As long as you have proper pre-treatment in place, you can absolutely use this system with well water. It sounds like you're already on the right track. The unit has an internal pump so pressure shouldn't be an issue

Kelly, I am trying to do the exactly what you said you have done. I have well water and I need a pre-filter in place, "upstream" to the WaterDrop RO system. I haven't purchased anything yet and I am wondering if your solution worked? If so, can you tell me what you used for the pre-filter setup? Thanks SO much!!

@@createaneutroncreateaneutr7433 Have you lab tested your water to confirm types and concentrations of contaminants present that need to be addressed?

Not yet, but we will for sure get it on the list! Thanks for the request

😂 fair enough. Glad you liked it, thanks for your feedback

Distillation or reverse osmosis. Each has its pros and cons, and I typically lean towards recommending RO as it's more practical. Check out this video about the countertop water filters that performed best in our testing kzfaq.info/get/bejne/qKeVhcaiy77SgqM.html

It would depend on the source water being filtered and the water issues that need to be addressed. I typically recommend reverse osmosis with remineralization for drinking/ cooking water, as it provides the most broad overall protection. Proper pretreatment should always be considered with all ROs. Here are a few to consider: The G3 P800 discussed in this video: waterdropus.pxf.io/YgOdLj Cloud RO: cloud-water-filters.sjv.io/jrOrdP The New Waterdrop X Series: geni.us/OOtfARh

@waterfilterguru Thank you for your response! What system do you use in your house? Or let's put it this way..what system would you install in your mother's house? 🤔

It really depends on the water water chemistry and contaminants present 😉What is the application? What type of water are you trying to filter? Have you had it tested? Do you know what contaminants you are dealing with? What type of system (POU vs POE) are you looking for?

There are 3 organizations that certify water treatment products to NSF/ANSI standards: NSF WQA IAPMO This unit has been certified by IAPMO: NSF/ANSI 42 pld.iapmo.org/file_info.asp?file_no=0014301 NSF/ANSI 53 pld.iapmo.org/file_info.asp?file_no=0013976 NSF/ANSI 58 pld.iapmo.org/file_info.asp?file_no=0013976

Reverse osmosis systems do indeed remove the healthy minerals, along with any potentially dangerous contaminants: waterfilterguru.com/does-reverse-osmosis-remove-minerals/ That being said, we get the majority of these healthy minerals through the food we eat, if we are eating a healthy balanced diet. The concern with drinking demineralized water is that there could be the possibility that the "hungry" water draws these minerals out of your body. This potential drawback can easily be avoided by remineralizing the purified reverse osmosis water: waterfilterguru.com/how-to-remineralize-reverse-osmosis-water/

You could use it with another faucet, but it might void the warranty. I'd double check with the manufacturer to be sure

It just needs one outlet

Glad to hear it! Thanks for watching

We have a K6 but haven't had a chance to install it yet so cannot offer too much insight yet. I would expect that it would require more frequent filter replacements due to the all in one nature of the filter cartridge, but again that really depends on the source water being filtered as well. Would love to get your feedback if you end up going with that system

@@waterfilterguru Did you have a chance to test the K6 model? Any feedback will be much appreciated. Thanks!

Great idea!

@@waterfilterguru You should do a video on harmful plastics that contain phalates and BPA, and specifically how to avoid them by not using PVC.

@@firexgodx980 Great idea! Thank you

Sure thing! Love the system

@@waterfilterguru Hi ！I want to ask if I can forward this video ？

The vast majority of water filter systems currently use disposable cartridges, unfortunately 😕 hoping to see innovation to address this issue in the future

I would suggest only using it with the spout it comes with for a couple reasons. First, the reverse osmosis water can be corrosive, so if used with a different faucet it could cause issues. Second, by using the system with a different faucet, you might void the warranty. You could double check this.

You could consider the G3 P400 model (same system, just a lower production rate capability and price point) waterdropus.pxf.io/R5RYDb

Yeah sometimes it's tricky to locate products in the certification databases. Here are the certs for the G3 NSF 58 info.nsf.org/Certified/DWTU/Listings.asp?Company=C0145653&Standard=058 NSF 372 info.nsf.org/Certified/Lead_Content/Listings.asp?Company=C0145653&Standard=372-DWTU

You shouldn't need to replace the entire system. You WILL have to keep up with regular changes of the filter cartridges or elements, however. Check out this article to learn all about it: waterfilterguru.com/how-often-to-change-water-filter/

Hey thanks for the comment and request. We've not yet tested the Home Master TMHP HydroPerfection Reverse Osmosis System, but I've got it on our list of ROs to get tested for a future project 🙂

Perhaps Comparing the Remin Ph ($150) vs the Waterdrop MNR 35 ($30)

Sounds like you may have read the WHO report (www.who.int/publications/i/item/9241593989) related to consuming demineralized water - or somewhere else that is reporting on this information. It is prudent to remineralize reverse osmosis water in order to prevent any potential adverse effects, and its super easy! As you already mentioned, the best water to remineralize with an under sink RO is with an inline remineralization filter, installed on the faucet waterline after the RO system, before the faucet. We have not specifically researched or tested remineralization filters, but most should work in relatively the same way. They will have small balls of calcite or similar that the demineralized RO water passes through. Since the demienralized water is "hungry", it will dissolve a small amount of the calcite media, thus returning calcium to the water. Keep in mind that because the media is slowly being dissolved, you will eventually need to relace it once it's completely gone.

Most minerals we need are in food. Dark green leafy veg have all necessary minerals. A lot of fruits have copper and so forth.

Sure thing! Keep in mind certifications often list the parent company, rather than the brand you might be searching for. For example, when searching the databases for 'waterdrop' nothing was showing up until I figured out Waterdrop is the brand, but Ecolife Technologies is the parent company that holds the certifications. Let the fun begin 😉 WQA wqa.org/find-products/ NSF info.nsf.org/certified/dwtu/ IAPMO pld.iapmo.org/

In addition to the NSF, the Water Quality Association (WQA) and The International Association of Plumbing & Mechanical Officials (IAPMO) certify water treatment products to NSF/ANSI standards. All three are legit and no one organization is considered superior to the others. They all certify products following the same rigorous testing procedures based on the product standard.

We've not yet tested the Brondell H2O+ system, so I can't offer a direct comparison at this time

Hey Thanks for your comment! The Puronics system you describe sounds like a water softener, which would be addressing water hardness and thus protecting the downstream treatment equipment (RO system) from limescale buildup. But without looking at pictures or testing data it's hard to say for certain. If what I suspect is true, then the Puronics water softener will serve to protect any new system installed downstream from scale issues.

Yes it will reduce arsenic, reverse osmosis is one of the best treatments for arsenic

Thanks! Reverse osmosis (any system) is not recommended as primary treatment for raw well water. It would be fine as long as you have sufficient pre-treatment in place to address any of the common well water contaminants that would foul and destroy an RO membrane and system

Check out this article! waterfilterguru.com/how-to-connect-reverse-osmosis-system-to-refrigerator/

In our case, the disposal outlet under the sink is wired so it only turns on with the switch. So we needed a separate outlet that always receives power for the RO system

The unit should only be used with the included dedicated faucet. If it's not, the warranty may be voided. The filter cartridge replacements are easy - simple twist and pull/push.

The UV stage is installed on the purified water line externally, between the unit and the faucet. It's LED, which they claim should last 50 years

TDS in the effluent (treated) RO water is directly related to the TDS of the incoming water, because the RO membrane reduces a %. So the higher the TDS in the incoming water, the higher it will be in the product water, and vis versa. Theoretically the % reduction should remain more or less the same until the membrane needs to be replaced

Yes, reverse osmosis is one of the best treatment options for microplastics and nanoplastics. We've not yet investigated nor tested the bluewater spirit

It depends on the specific water situation. Well water can be extremely complex. When was the last time you had the well water tested? Do you know what contaminants are present?

No, remineralization is not mandatory

Great question! Honestly I'm not certain, I'll have to check with Waterdrop and get back to you

Hi, Thank you for your interest in our filters Regarding this issue, we are sorry that it is not recommended to tilt it or install it sideways. The system is designed with a leakage protector. if it were installed horizontally, the protector would be destroyed. We suggest putting the system in an upright position. If positioned improperly, the system may fail to perform as expected. Tilting it may also cause extra noise. Enjoy the rest of your day!

In the works!

Test results live! kzfaq.info/get/bejne/e8idZr192qvJp2g.html

Yes you can. If the water pressure is inadequate you would need a booster pump.

We'll, are you looking for instant hot water on demand? Then the K6. If not, the G3 series!

I've tested two Waterdrop RO systems so far, neither leached methylene chloride aka dichloromethane or xylenes: G3 P800 kzfaq.info/get/bejne/e8idZr192qvJp2g.html N1 kzfaq.info/get/bejne/otOHe8ZysLebm58.html Currently testing the new X12 model - interested to see if these detections show up or not

I'm honestly not sure about the hot water thing, I'd recommend reaching out to the manufacturer about that one. Hooking it to your fridge will work just fine!

Very few water filter systems work with hot water. This one doesn’t work with hot water. Need the mini external tank if “T”-ing off to a fridge. It holds about a liter and ensures pressure when first turned on. I’m glad I installed it.

As with all tankless RO systems, it's recommended to let the water run for a couple seconds to flush out any stagnant water from the system that may have been subject to TDS creep

Never heard of it

So I'm told, but I've not personally tested the G600 model.

As long as you have proper pre-treatment in place, it could be used with well water. Common well water issues like iron, manganese, or hard water can foul and destroy RO systems like this, but if correctly treated upstream you could use the RO unit without an issue

Yes, as long as the TDS is

@@waterfilterguru thank you so much

It can, but reverse osmosis requires both electricity and plumbing connections. You might be better off with a direct-connect inline filter. This unit also has a large footprint so might not be ideal for a camper.

Yes, but it might void the product warranty. Make sure to read the fine print first. Then check out this article waterfilterguru.com/how-to-connect-reverse-osmosis-system-to-refrigerator/

Yes, they even sell an adapter to do this easily

This one, the Waterdrop G3 series. As long as the well water is properly treated upstream, there is no issue using a tankless RO like this one

We'll look into them, thanks for your suggestion!

Yep, revers osmosis membranes remove particles down to approximately 0.0001 microns in size

Hey Henry, thanks for the comment! 1) Tiny air bubbles being released from newly installed filter elements are completely normal and should go away in time 2) What does the film look like? Are you sure it's not the air bubbles from #1? 3) Do you have the optional remineralization filter installed? The TDS reading the unit itself takes is done before the remineralization filter stage. If you have the remineralization filter installed, this would be the discrepancy.

Yes one of the best! Check out the Cloud RO too cloud-water-filters.sjv.io/jrOrdP it's a conventional style with a tank, but the most efficient and most modern model of that type we've come accross

The AquaTru with remineralization VOC filter! aquatru.pxf.io/b3WYGP

Not sure why - reverse osmosis is the best method to remove excess sodium from softened water 🤷

Agreed. I was told this directly from Waterdrop. They went on to say that if I switched from Sodium to Potassium the system could be used. Of course, potassium is much more expensive. And I don’t understand what the difference would be.

@@lorengrossman5455 very interesting, I'll have to follow up with my contact at Waterdrop to ask why they would say this

Love to know what they say.

The issue there is that the purified RO water could become recontaminated from the existing faucet and plumbing. This would also most likely void the warranty of any RO unit installed like this. If you are in a rental situation and are unable to install a unit like this, have you considered a countertop RO?

It depends, if you have sufficient pre-treatment in place then you can absolutely use an RO system. However these systems shouldn't be used as primary treatment for well water. Do you have any other treatment in place? What contaminants are present?

RKIN U1 bit.ly/3QJDNFo AquaTru aquatru.pxf.io/b3WYGP

I've got the Frizzlife PD600 added to our list, thanks for the request!

Hopefully soon, we've had a slight setback we are working to address

Test results live! kzfaq.info/get/bejne/e8idZr192qvJp2g.html

Probably not something to be concerned about. If it keeps bothering you, I'm sure there could be a way to use a bracket or similar to hold it to the wall under your sink

No that's how it should be!

@@waterfilterguru I thought so but in your video you said that UV is the last date so I thought I second-guess myself lol thank you

Do you mean 1) Installing this for use as a whole house treatment system? OR 2) Using this in conjunction with a whole house system?

Not yet, but we'll be testing a G3 model soon!

Keep us posted with which you decide to go with, and how you end up liking it!

Hey Max, great questions! I'll try to answer below: 1. The different membranes (400, 600, 800) are not compatible. They are limited by the pump capacity in each system. That is, each system has a different sized pump which limits the flow rate, to the spec, so you will need to use the correct RO membrane sized for your system 2. Not sure what you mean by 'tail' - do you mean a small plastic tab that was intended to remove the plastic screen protector used for shipping? I can't imagine that you would have scratched glass with your fingernail

1. Oh…Okay, let it be. But it could be so cool as VAG Automotive to “enable” features which are disabled bc of model level :) Thank you for your answer! 2. Yes, exactly that you said :) I could not get rid of screen protector as I just got a tail in my hands when I pulled and a cannot even do that with a toothstick :) 3. Do you have information or experience about what pump is more quality or lives more: 400/600/800? And who makes those pumps? Why I’m asking… many years ago I was selling RO filters and there’s an experience that pumps live 6-12months

The D6 has just one filter cartridge that includes multiple stages of filtration while the G3 has separate filter cartridges for different stages. The D6 is capable of producing 600 gallons per day while the G3 can do either 600 or 600, depending on the model. The D6 has a 2:1 pure to reject water ratio, while the G3 is 3:1. The G3 has a UV stage as well

Absolutely! Bottled water has the potential to leach microplastics and other chemicals from the bottle itself, plus bottled water is regulated by the FDA (not the EPA) so the rules around testing are far less stringent. We are currently working on a big project to test many of the most popular bottled water brands to see what kinds of trace contaminants they contain! Make sure you're subscribed so you get notified when we upload that video: www.youtube.com/@waterfilterguru?sub_confirmation=1

@@waterfilterguru and glas bottled water? are there only plastic bottled waters in your area?

@@johnmachter40 It all depends on the bottled water manufacturer. Bottled water is regulated by the FDA to much less strict guidelines than tap water which is regulated by the EPA. Best bet is to filter your own water at home, plus it's much more cost effective in the long term

Because reverse osmosis offers the most broad contaminant reduction capability, providing purified water across various applications. It's the golf standard for drinking water in the industry. If you are concerned about drinking demineralized water, many RO systems have an optional remineralization filter stage which adds healthy minerals back into the purified water.

We haven't tested a Kinetico system, so it would be difficult to draw a direct comparison until we do so!

I don't see why not. Just make sure to check he warranty fine print - it may void the warranty if the unit is not installed as per the manufacturer's instructions. Just something to keep in mind.

CF filter ~6 months CB filter ~12 months RO membrane 2 years Remineralization filter 9-12 months

Agreed, it could be better

Due to the commonly occurring harsh well water contaminants that are typically found in much higher concentrations. Things like hardness, iron, manganese, among many more. If there is no proper pre-treatment in place, these contaminants will clog the internal components of the system and foul the RO membrane quickly

@@waterfilterguru Well, I live in south Florida and yes the inlet water is hard, I change the 3 filters (pre, post, and RO) once yearly and do a periodic TDS test and is always good.

Yes, the main power cord is 90", faucet's power cord 59"

@@waterfilterguru thanks mate, is the main power cord the same on the G2 too do you know?

@@bragg2012 Yep all the G series systems have the same power cord I believe

anything you recommend? better to have something than nothing

I mean, your needs aren’t representative of everyone. Not everyone, or even nearly anyone is looking to avoid fluoride.

Reverse osmosis does indeed reduce fluoride, by up to 90% kzfaq.info/get/bejne/fr-mrLRh1ruRnok.html We are in the process of performance testing this system, so stay tuned for those results!

@@BeaulieuTodd I understand that Sir. But my point is if you spend thousands buck it should come with great filtration, because I don’t care how many blinking lights it has I’m looking for water purity. Because not many people buy water filter for that kind a money to make water for flowers or aquarium. If you don’t care Sir about fluoride in you drinking water than you didn’t research this topic enough. I love when people eat drink garbage and cry later that they have a cancer. Im not bashing this filter I’m saying to hope one day it will be improved, love that is slim and tankless little improvements and it will be great unit.

@@waterfilterguru make it smart tests, best would be with lab test, don’t know the cost but you would bet any KZfaq channel out there !

Thanks for your suggestions, we'll get them on the list!

Yes, all of the G3 line of systems are certified to NSF 58 by IAPMO pld.iapmo.org/file_info.asp?file_no=0013977

Good catch, thank you! Fixed now

*** unless you already have an adequate pre-treatment system in place (don't forget that part!)

@@waterfilterguru I have 1800 tds on my well, after my softener it’s worse around 2700-2900, we have really high sulfide around 1700 ppm, so our water is bad bad, 180 hardness, so the only option if we wanted pure water is a whole house RO, we have a under the sink RO for cooking and water for the dogs. The well water is fine for showering. At least it doesn’t have any iron in it. We have a super cheap whirlpool RO system, so the idea you’ll be changing your RO membrane once a year isn’t surprising.

I can add it to our list of systems to look into. Thanks for your request!

Thanks for the idea! We'll add it to our project list. That said, the majority of water treatment products that use plastic use a type of plastic that is certified to NSF/ ANSI standard 51 for materials safety (www.nsf.org/knowledge-library/nsf-ansi-51-and-nsf-ansi-61-product-certifications-for-food-and-drinking-wa) which ensures it won't leach anything into the filtered water it comes into contact with. Still, I love the idea and would like to see how we could put some sort of test like this together.

@@waterfilterguru How does leaching work when plastics are heated regularly, such as the Osmio Zero machine we use at home which has a built in heating element (kettle) inside and can dispense up to 100C water? I will read the cited NSF reference, thank you.

We'll put it on the list! thanks for your request