Rig Welders - Techniques for Stick Welding

No video

Rig Welders - Techniques for Stick Welding

Рет қаралды 173,435

5 жыл бұрын

Pepé is a rig welder from Houston Texas and he is going to be showing us how he welds a 12" bell hole with a 6010 root 8010 fill and cap downhill. Joining him is South Coasts one and only Abe with former South Coast student Victor and Pepés right hand man Daniel! Its hot out here in Texas so lets get to it!
________________________________________________________
WELDING SCHOOL: www.scweldingacademy.com
INSTAGRAM: / southcoastweldingacademy
FACEBOOK: / southcoastweldingacademy
________________________________________________________
TOOLS, EQUIPMENT WE USE & RECOMMEND:
★AMAZON: www.amazon.com/shop/weldtube
★OUTLAW LEATHER: outlawleatherusa.com
★HEAVY HITTERS TIG RIGS: heavyhitterstigrigs.com
★ABICOR BINZEL: binzel-abicor.com
★TILLMAN GLOVES: jtillman.com
________________________________________________________

Пікірлер: 171

@weldtube Жыл бұрын

👇WeldTube Store👇 www.weldlife.com

@andresanaya598 4 жыл бұрын

I like how dude gets mad at his helper for doing what he wants him to do on the heat 😂

@Welddotcom 5 жыл бұрын

Awesome work guys! Loving the collab vids

@Welddotcom 5 жыл бұрын

@@weldtube our pleasure. Keep up the good work

@rolltide2937 5 жыл бұрын

The SA-200 is the perfect downhill machine especially the model with the arc control you really can just hold the rod in the grove and it lays down like butter on a biscuit !!!!! The miller is ok but the puddle stays to wet when capping the amperage stays to consistent even when you long arc so you’ll get a lot more undercut, the Lincoln has a much more stable current and you can control your amps by decreasing or increasing arc length to the base metal which makes it easier to stack dimes on the bottom without leaving undercut!!!!!!!! These boys are jam-up hands I love to see our craft done right by real welders most of these guys on KZfaq are just test lab welders !!!!!!

@Excaliber7018 4 жыл бұрын

I hope you are being sarcastic about the miller being to consistant. If anything miller has a "more stable arc". Plus I have never seen any 200 that's original that has arc control. Besides the 200d

@diamondsconstruction4949 5 жыл бұрын

Finally a big blue 300 in a vid been wanting to see if there was a big difference from a “pipe pro “ and a “big blue”

@jassirortega 5 жыл бұрын

Happy to see that el Pepe finally learned how to weld lol Nice setup and Great job guys!

@andrewbrown7876 4 жыл бұрын

I’d like to see this stuff get x-rayed and interpreted to a pipeline code

@troydunn6005 2 жыл бұрын

As a newby, that is some of the clearest weld puddle camera work I`ve seen.

@artvandalay2736 2 жыл бұрын

peep weldingtipsandtricks hes got good puddle shots

@ypaulbrown 5 жыл бұрын

Thanks so much... you guys rock and really give a great presentation.....don't stop showing your craftsmanship and dedication.... PB

@mikemullins3761 5 жыл бұрын

Old welders use to tell up & coming welders that if they showed up on a jobsite with a Miller, they'd b "run off the jobsite." Obviously no longer these days. Whichever & whatever works!

@Ruben901 5 жыл бұрын

Nowadays its "if it doesn't use diesel, get out of here" lol

@WarInHD 5 жыл бұрын

Dumbest shit ever, Miller welders are way ahead of Lincoln by along shot. Best example is the Miller Pipeworx 400, it’s a 4 phase (Stick, TIG, MIG, and Flux Core) machine and it runs fucking great. Lincoln can’t figure out how they got all 4 of them to run so great, they could only make a 3 phase machine

@ArCh-or7ey 5 жыл бұрын

In just trying to get a job as an apprentice over here, and y’all talking about who’s better and what not, on-a serious note, where does one apply at? I’d like to get on.

@WarInHD 5 жыл бұрын

Ar1240 Ch go to your Local Union Hall and ask the coordinator for an application

@ArCh-or7ey 5 жыл бұрын

Clifton Williams thanks bud, Collision tech 16 years and going, mig and aluminum certified, I think I like to try something else, bud I’ll definitely go check that out. Thank you

@johnw.peterson4311 6 ай бұрын

Great men and great work quality.

@donleejr7624 4 жыл бұрын

THANKS Y'ALL MASTERS FOR THE AWESOME WELDING!! I'M A MASTER TO PIPE IS FUN!! THIS WHY WE GO WORK .

@AGueroAFuera 4 жыл бұрын

Beautiful welds good work guys!

@johndunn9819 2 жыл бұрын

Thanks fellas, really nice job. Next time if you please, can you show a little bit more back and forth SA 200 vs Miller. Like have an SA 200 man demonstrate what so great about SA 200 and and the Miller man demonstrate what he likes about the arc and welding capabilities of the Miller. I know they're both great machines, I just want to see / hear why so many especially pipeline welders gravitate to that old iron. Thanks again

@KevinsDisobedience Күн бұрын

These guys are masters!

@gulayaomj Жыл бұрын

Amazing both of us making welding pipi.. good job idol.. watching from tramo pasay city Philippines

@vigwelding926 4 жыл бұрын

Pepe,.I hope to meet you in the field one day when I finally break out.

@MichaelSmith-gu3tt 4 жыл бұрын

I died when he asked for the hammer and said “it should be done in there”. When i was helping that line would piss me tf off let me tell ya 🤣 brought back memories when i heard that

@MichaelSmith-gu3tt 4 жыл бұрын

Somewhere in there*. Auto correct

@alimuhammad8079 4 жыл бұрын

I see the complete weld joint and enjoyed you Did great job super.

@BrazilWeldsMessiasCarvalho 5 жыл бұрын

Amazing vídeo!!

@timoharkala7414 5 жыл бұрын

Good job.In Finland downhill welding is not permitted method high pressure pipes or load bearing structures

@jhlranch8082 5 жыл бұрын

5:06 - 5/32 6010 at 35amps....45-50amps 5/32 8010?? Maybe 35 - 50 on the remote. Nice job - nice machines - nice welds

@ypaulbrown 5 жыл бұрын

Thought the same thing

@tapllarrow3984 5 жыл бұрын

How can you run that low? Is it the gap? What do you mean remote? I'm a Tig welder learning stick.

@AGueroAFuera 4 жыл бұрын

@@tapllarrow3984 the dial goes from 0 to 100, if you have your machine set at 160 amps then 100 is 160..the remotes are convenient so you don't have to run back and forth to the machine constantly

@robertniles8733 3 жыл бұрын

Those amps are NOT accurate!!! That’s what the remote is set at....not the amperage. 5/32 at 40 amps???? Never

@donndonn9308 4 жыл бұрын

All new equipments, new glove, new hood, new shirt ,new shorts, new stingers haha

@ratrodramon 3 жыл бұрын

That was a great Bideo guys 👍👍

@mikemullins3761 5 жыл бұрын

Excellent job and teamwork! 🙏

@rafatrill 5 жыл бұрын

When is that pancake coming out? Hope they have designs like the rest of there stuff

@williebateman3613 5 жыл бұрын

Love too see my peeps welding bad azz💥

@CM-fh7fe 5 жыл бұрын

Pepe seems like a cool guy to work with or for

@ayayiyannicksika7142 5 жыл бұрын

merci pour la vidéo vraiment sa motive

@NelsonBarbero 9 ай бұрын

Muy buen video y exelente tomas! Que cámara y lente usaron???? Saludos desde Argentina!

@romankrush4498 4 жыл бұрын

Thank you guys! Great video

@davidspin5353 3 жыл бұрын

SA 200 is a freaking classic, love the sound, But Miller PP400 with a Cat is the cats pajamas.

@garyteague9555 5 жыл бұрын

love the way you ground the welders

@ypaulbrown 5 жыл бұрын

Grasshoppers Baby!

@Merksboyy56 4 жыл бұрын

Fresh video an thanks for the tips I just passed my union pipe test #navajonation

@eyeraskinswhatever1770 Жыл бұрын

They call me Pé-pé 🥺💜

@manuelangelgarridoperez6334 3 жыл бұрын

Carallo..!. .sois unos fenomenos....! ..sl2 desde Galicia - España🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸

@toothrowedTV 5 жыл бұрын

Can we see more of the bottom side

@farmerx165 5 жыл бұрын

it was +26 C today in Canada and I barely made it through the day, whats the daytime temp in Texas

@kevtech733 5 жыл бұрын

Nice video demo. Could you please do a video demo on 2 inch sch 120 carbon pipe using 309 stick electrode for fill and cap tig 309 root hot pass?

@sinanali3646 5 жыл бұрын

Good job guys

@derrickchisholm8086 3 жыл бұрын

So why weren’t the grounds on the end of the pipe and why did Abraham have the clamp handle in his face taking the top?

@pioneer164 11 ай бұрын

Thanks ❤❤❤

@alexpmK3 3 жыл бұрын

outstanding. period.

@kestergascoyne6924 5 жыл бұрын

Thanks for the content!

@downhilldaddy5282 Ай бұрын

Shot all them sparks at the truck lol

@benh9961 5 жыл бұрын

Thanks a lot guys

@markoliberty7581 2 жыл бұрын

One dumb question: Why don't you use automatic helmets?? Are they too clumsy or what?

@scottleisher6977 3 жыл бұрын

Who makes that grasshopper? Like that one

@viorelscrob6391 2 жыл бұрын

I would like to work there.

@jorgetejada9169 4 жыл бұрын

Buenas noche, ustedes no podrán poner subtitulada en español,hay parte que le entiendo

@ANDY-we7mr Жыл бұрын

What stick welding rods are there

@osvaldorivero4242 Жыл бұрын

BRAVO !!!!!!

@adamalikhan1357 Жыл бұрын

What their right hand doing one this video 😁

@jestolmak4869 4 ай бұрын

Top Notch

@armandoabonitalla9373 3 жыл бұрын

i like your helmet boss..can i buy that one too?where?

@gasclutch6280 4 жыл бұрын

Shoutout to all my paisas, made the video 10x better lmao

@InfoGtoi 4 жыл бұрын

Terimakasih, video sangat membantu saya dalam belajar

@LimpBizkitDrummer 5 жыл бұрын

Nice work guys. Greetings from Germany. ⚡👍🏻

@HTXJM 5 жыл бұрын

Now let perform visual & phased array exam and see. Lol. Jp I'm sure all is good!

@kvalfat2682 5 жыл бұрын

I love your video. Pls try doing aluminum. I want to see aluminum pipe being welded.

@madcapmagician6018 5 жыл бұрын

That was done damn nice welding looked good. 👍👍

@jeffschmit9471 5 жыл бұрын

What is the rig on the top of the pipe called, not the clamp. and how does it mount

@mattharper588 5 жыл бұрын

Jeff Schmit it's the ground clams and mounts with magnets

@mattharper588 5 жыл бұрын

Jeff Schmit the other fixture holds their grinder and wire wheel and also uses magnets

@jeffschmit9471 5 жыл бұрын

@@mattharper588 I thought it had the work clamps on it but wasn't sure. Pretty cool fixture

@ypaulbrown 5 жыл бұрын

Called a grasshopper, keeps the work lead in the Grove so no ground arc strikes outside of weld arra

@DanielRodriguez-vk9of 5 жыл бұрын

Is the grasshopper in the bevel to prevent grounding marks on the face of the pipe?

@missmskarma 5 жыл бұрын

Daniel Rodriguez yes!

@duncanmacfarlane8672 5 жыл бұрын

Thanks. You guys can weld good, some audio problems when welding couldn't hear what he's saying. Great content, always appreciated

@user-yj5ye9wm5t 2 жыл бұрын

Beautiful

@metalslingr 5 жыл бұрын

Showing love for Whistle Stop Leather Shop.

@wadewittman8510 5 жыл бұрын

Fantastic job gentleman 👏👍!!

@FranciscoGarcia-zv1lr 5 жыл бұрын

Primo them shirts, where you get them from.

@asteroidpaper9985 2 жыл бұрын

What amps y’all use for the toot

@-n_hunter8403 5 жыл бұрын

PEPE KNOWS!! good job bro..you don't use one motion all the time you use what's working right now, circles, whipping, side to side, whip and side to side etc....

@paulmunoz8801 5 жыл бұрын

Muy bien..saludos desde Ecuador

@djyul 3 жыл бұрын

SWEET!

@marcossolorzano3453 5 жыл бұрын

Excelente tutorial. Saludos desde Guatemala 😁😁👏👏😁👍🇬🇹🇬🇹

@gaek778 2 жыл бұрын

Saya suka sama kap las nya

@onlyweldz3825 5 жыл бұрын

That red face definitely stacks more metal than any miller out there .

@taylorsanchez8839 5 жыл бұрын

What type of welding lens do you recommend?? I use a #10 but i have to grind a line before capping because if i dont i'll get lost and my cap comes out crooked..

@davidmartin2231 5 жыл бұрын

Taylor Sanchez lol ur blind. J/k j/k switch to a 9 and roll with that

@taylorsanchez8839 5 жыл бұрын

@@davidmartin2231 hehehe i dont have any trouble when i weld uphill with 7018 or when i weld tig..

@davidmartin2231 5 жыл бұрын

Taylor Sanchez do you Stare at the “light”? Cause that may be throwing you off. I like to follow the rod as I travel. I’ll look forward, the bevel, how it’s stacking in the back, the other bevel, and right back to where I started. If that makes sense.

@taylorsanchez8839 5 жыл бұрын

@@davidmartin2231 yea i see what you mean.. when i do one bead cap i dont have trouble its when i do several bead cap.. just that first bead after that i can see pretty good..

@taylorsanchez8839 5 жыл бұрын

Some dudes outhere have a wenz lens they recommend it but its kind of pricy

@jamespyritz9825 5 жыл бұрын

I wish I could have one day with you showing me hands on

@cantero1984 3 жыл бұрын

Nunca e trabajado con los pipeliners yo soy pipe welder y no hago down hill Yo hago puro up hill mi root pass Me gustaría calarme con un pipeliner para ver cuál sale mejor el down hill y yo up hill

@jeanpaulj5jpech206 5 жыл бұрын

Impecable 👍

@michaelcoriglianol7197 5 жыл бұрын

Does the hood give you decent protection? Itd intresting, great job and presentsion keep buring rods men!

@spenserpayne4746 5 жыл бұрын

Michael Coriglianol actually yes. Pancakes block out all the back light that you get a pipeliner. So yeah it’s better for your eyes

@mikeymoney8676 4 жыл бұрын

The grinder holders and ground holders are dope does anyone know the brand of them ????

@noor84room84 5 жыл бұрын

Good

@tractornewholland9249 5 жыл бұрын

ใช้ไฟเเรงป่าวคับบ

@iambuloss4605 3 жыл бұрын

I am welder i want opportunity

@hosschee180 5 жыл бұрын

Where do I get on pipeline ?? 🤙

@manuelchavez7018 5 жыл бұрын

Salisbury construction.....3S services....stop anywelder in Carlsbad or Hobbs. M

@dallasgearsgodpettman1941 2 жыл бұрын

Abraham looks like he’s wearing a bald cap

@isiah_montoya9701 4 жыл бұрын

Local 100 but wanna go to the 798

@isiah_montoya9701 4 жыл бұрын

hillrabbit 798 oh ya Ima stay and turn out then after go when there is work

@jobvillanueva9250 Жыл бұрын

Chulada

@davidmartin2231 5 жыл бұрын

Who parked their rig next to the weld?🤦🏾‍♂️ New T300’s, new gloves, new pipe jacks, and new hood🤔

@chriswood5114 5 жыл бұрын

I was thinking the same thing. Why is everything brand new? Even the grinders. 🤔

@victordavidup 4 жыл бұрын

They bought everything to shoot the videos. I do not even know what is your stupid question.

@chriswood5114 4 жыл бұрын

I get that they bought everything for the video. The question is why? If you do this day in and day out you should have everything. They dont go out and buy new for every job right.

@victordavidup 4 жыл бұрын

Chris WOOD it’s a school Chris. They have bags and bags of new stuff to work with. Also this is the first video where they shoot pipeline weld outside.

@Hardstyler981 5 жыл бұрын

I need to get into a pipe job someone help plz

@weswhisman1138 5 жыл бұрын

Good welding men and nice welders

@TheEasy10pins 5 жыл бұрын

Hey WeldTube Family, how about doing a video on Pulse Mig in various positions......

@ktmturbo5836 4 жыл бұрын

Fun to see how many americans u need to weld a pipe. In Europa that is a one man jobb.

@victordavidup 3 жыл бұрын

That’s why USA is the number 1 all the way baby. 😘

@FernandoRodriguez-gp5rx 5 жыл бұрын

Enséñame a soldar amigo soy de Argentina puedo viajar a norteamérica para aprender

@Mustang-qk8zs 5 жыл бұрын

What brand of electrodes are they using in the video?

@Mustang-qk8zs 5 жыл бұрын

WeldTube Thanks

@Stinkytheskunkyfan 5 жыл бұрын

Lmao, there is no way you were using 35 amps to run a 5/32 rod. 😂😂😂

@missmskarma 5 жыл бұрын

DocdDeaD 35 (85) on the remote for 1/8 and 40/50 (115) on the 5/32 if you set the remote at 210

@missmskarma 5 жыл бұрын

And if you set the remote at 400 you can run 5/32 at 20/30 lots of people don’t know Miller’s

@Stinkytheskunkyfan 5 жыл бұрын

Remotes work of percentages of what the max amperage is set?

@missmskarma 5 жыл бұрын

DocdADeaD yes they do like if you set the machine on 300 everything changes but a lot of people do 200/220 because that’s what Lincoln uses and it’s easier

@ypaulbrown 5 жыл бұрын

@@Stinkytheskunkyfan yes

@mr.nobody8988 4 жыл бұрын

Why you welding 5g down

@brandonmiller9234 4 жыл бұрын

That Sa puddle looks wettt

@ElCokiAltahabana 5 жыл бұрын

Mi brother mogollón..caminalooo..

@delispadilla7013 5 жыл бұрын

Were can I get one of those jackets?

@delispadilla7013 5 жыл бұрын

So were can I buy one of those jackets?

@delispadilla7013 5 жыл бұрын

I was talking about the welding jackets .

@tonyguerra7799 5 жыл бұрын

delis padilla no one is wearing a jacket my guy it’s summer time in Texas,,those are wrangler pearl snaps,,,extra heavy on the starch the Texas welder way the only way