WILL IT FINALLY RUN AND DRIVE? 1979 Ford F100 Parked Since 1992!

Рет қаралды 6,462

Күн бұрын

In this episode, will this 1979 Ford F100 Straight 6 finally run and drive for the first time since 1992? Aaron finishes installing some key components, corrects a simple mistake, and hopefully takes it out for a spin!
Installed:
Holley 390 4 barrel carb and 1" spacer
Offenhauser dual port intake
Hedman header
Stainless dual exhaust
Amazon throttle linkage
Dorman fuel tank and sending unit
Champion radiator
Belts and hoses & thermostat+housing
Plugs, wires, & cap
Vercelli Classic 787 P235/75R15 105S WSW tires

Пікірлер: 50

@GxHxN 2 ай бұрын

I one! She sounds amazing! Man, I really miss mine 77 😢

@AccountIGuess 8 ай бұрын

I love the Ford 300's my 1978 F-150 has it and they never die. Dentsides are my favorite kind of Ford truck none of that new crap.

@DentsideDepot 8 ай бұрын

COULDNT AGREE MORE!!!!

@DentsideDepot 8 ай бұрын

It's a beautiful day here today in Bucks County PA, I am going to drain the water out of it after lunch and put coolant in it and probably take it for a nice drive. New tires are on it now and I am loving this truck as much as any other one I have right now!

@willhart7861 3 ай бұрын

I love it!! I have grown to love the straight 6. I own a 77 f150 that I would love to install an offenhauser intake and new carburetor on. I've read that it really makes a big difference in the motor.

@corydriver7634 6 ай бұрын

I don’t doubt this truck has been parked for a long time but would argue the Sear shocks don’t prove this. They only prove the shocks are old. Cool old rig though.

@DentsideDepot 6 ай бұрын

True, I was just gathering evidence that supports that it was. The plates do have a 1992 registration sticker on them though, so that right there is pretty conclusive. The seller had no reason to lie to me, especially after I had already paid him for the truck :)

@coreydarr8464 Ай бұрын

Nice looking rad. nice & big! The in-line 6 (300ci) a very good engine!

@steves47150 Ай бұрын

Glad I watched, was putting my carb on "backwards" like you did at first, thinking not that big of deal. But after seeing how it affected idle, will now put on like design was intended.

@mrglock2313 8 ай бұрын

Cool truck. I have a 1975 Ford f-100 with a 460 ci in it. Awesome trucks

@DentsideDepot 8 ай бұрын

Awesome! thanks for checking out the channel!

@georgehuerta1990 8 ай бұрын

I love that motor I had one in my 1995 f150. Thanks for sharing this video with us that is a great truck you’re a lucky man I’m hoping one day maybe I can find one like that with that motor that is a great motor I don’t know why Ford ever stopped making that motor.

@DentsideDepot 8 ай бұрын

Thank you! Yes its really cool and its fun to drive, a great motor for sure.

@Mr-er6fg 8 ай бұрын

Emissions!

@georgehuerta1990 8 ай бұрын

@@DentsideDepot yeah that motor is such a classic motor in the truck that I had I was pulling an 18 foot Boston whaler with 150 hp Yamaha and that truck and motor would pull it down the highway and hardly struggle at all and that was a heavy boat with a big ass motor. That’s why someday I’m gonna buy me another truck with that motor in it and have it rebuilt where it’ll last me until I die.

@georgehuerta1990 8 ай бұрын

@@Mr-er6fg What about omissions when you buy an old truck it’s grandfathered in the 95 96 trucks had emission controls in them. I would love to see this engine in a modern vehicle I believe that engine would put out probably about 360 hp 400 pounds of torque easily. Maybe even a lot more because back in the day in my truck it was putting out I think 250 hp with 300 pounds of torque. That was back in 1995 it was such a great engine and it never had problems it would just run and run and run that’s all that engine ever did that’s probably the reason they stop making it they couldn’t sell parts for it.

@Mr-er6fg 8 ай бұрын

@georgehuerta1990 the question was "Why did they quit making this engine". Answer- EMISSIONS!

@randyfowler6928 8 ай бұрын

Great work brother

@DentsideDepot 8 ай бұрын

Thank you Sir

@toralfcross3819 3 ай бұрын

I just rebuilt my 300 in a 74 F100 short bed and it runs OK but I would like to have headers for mine. I put the elgin RV cam and comp valvetrain components but the engine is only happy pulling up to 4000 rpm with stock manifold, cam and offenhauser intake with edelbrock 500 cfm. I did jet carb to best suit the engine.

@jannettesteverson3262 Ай бұрын

What is your rear gear ratio? And fuel mileage? I'm putting together a 79 f250 has a 460 i have a choice to run 460 or a 300 with all the ad on's except the cam.

@ronjohnson6012 8 ай бұрын

Love your truck I have almost the twin to mine is 300 6cyl 3 spd still on the column maybe I can send you a picture of mine if I figure out how

@DentsideDepot 8 ай бұрын

That would be awesome. I have a facebook page I just started, you are more than welcome to join and post it there, would love to see it! facebook.com/groups/1204027340243505

@jannettesteverson3262 Ай бұрын

Dentside Depot I'm interested in knowing what your mpg/fuel economy is with all those mod's.

@crazyryan2689 8 ай бұрын

Thankfully, the spring has retainers.

@DentsideDepot 8 ай бұрын

I always try to be safe when a vehicle is in the air, anything can happen when you start taking parts off, but yes you are correct.

@user-gl1di2ks9v 7 ай бұрын

I have 3 òf the explorers 77/78/79 . I'm taking all 3 to make one good

@DentsideDepot 7 ай бұрын

So many people give me a hard time for taking multiple trucks apart to build one good one, but that is what it takes to build a good truck. Good luck with your build!

@josephtizol9695 6 ай бұрын

What a great channel I Just subscribed I’ve got a 69 F100 I’m going to be pulling the 360 and replacing it with a 300 I’m in the process of collecting parts for a short block I bought I’ve got an Offy intake do you have a link for that bracket you got off Amazon for the carb? Semper Fi I just saw in the video you removed it and rotated your carb I’ve got a Holley 2300 500 cfm 2 bbl I plan on using but my intake is the Offy C so maybe I won’t have issues?

@DentsideDepot 6 ай бұрын

Thanks for checking out the channel! The bracket actually didn't work out for me only because I had to flip the carb around since it is a dual plane intake. If you use a single plane intake it will work, just type in throttle bracket on amazon and many options will come up, anyone will work. So yes, for the type C it should work and that seemed to be a really good setup. Remember to get a throttle cable too :)

@josephtizol9695 6 ай бұрын

Sounds good thank you

@DentsideDepot 6 ай бұрын

Absolutely!@@josephtizol9695

@user-yq8dt5qb8x 6 ай бұрын

May I ask wheir can I purchased a new aluminum radior for my 1977 FORD F100 4.9L it also has the inlet & outlet located on RH side of the raidior. I've been watching you Utube vidio and noticed that you have installed one Thank You.

@DentsideDepot 6 ай бұрын

Hi Sir, that one is from Champion, they are the vender that has one in stock right now like that. Thanks for checking out the channel!

@WilliamMunny-d8s 23 сағат бұрын

DONT you STILL have the carb 180 degrees out of phase? just asking cuz last time i seen a guy mention making this mistake he had it with the throttle cable at the front of the carb, unless its just totally different carbs?

@phooesnax Ай бұрын

Value of f100 relatively rust free 6 w 3 on tree. Short bed fleet side 38k with broken odometer asking nearly 20k?

@jacobbuckley8232 8 ай бұрын

Did the bracket for fan not work i see u put the metal fan back in

@DentsideDepot 8 ай бұрын

Unfortunately Amazon sent me a chevy spacer, so I just went with the metal fan. Thanks for checking out the video, I may change that back later down the road, wanted to drive it!