Woodworking Wisdom - Bandsaw Clinic, Set Up And Q&A
Рет қаралды 4,476
2 жыл бұрын----------------------------------------------------------------------------------------------
It's time to tune up your Bandsaw and get it singing 🎶
Join Craig for a Q&A session as well as a complete setup guide to suit any size or make of bandsaw!
AXMINSTER TRADE AT2552B BANDSAW
bit.ly/3CWzXBn
AXMINSTER CRAFT AC1950B BANDSAW
bit.ly/3g9BEC0
AXMINSTER DELUXE RIP FENCE UPGRADE
bit.ly/3mgnGSu
AXMINSTER SMALL RIP FENCE UPGRADE
bit.ly/3iUeXDj
UJK BANDSAW BUDDY
bit.ly/2W43MPu
BANDSAW BLADES
bit.ly/3xRYe7X
SHOP - www.axminstertools.com
BLOG - knowledge.axminstertools.com
FACEBOOK - / axminstertools
EBAY STORE - bit.ly/AxminsterEbayStore
EBAY OUTLET - bit.ly/AxminsterEbayOutlet
AMAZON STORE - bit.ly/AxminsterAmazonStore
CALL (UK) - 03332 406406
@cindyharrison4191 Жыл бұрын
I wish I'd seen this before buying my saws. First the depth was to short, the second I'm now having trouble getting a straight cut.
@WhoGnu08 2 жыл бұрын
Great tip on over-tensioning versus under-tensioning. Thank you!
@richardchiswell6517 2 жыл бұрын
Thanks - really helpful especially your trick of using a couple of clamps when fitting a blade.
@danlanch9231 2 жыл бұрын
Some excellent tips in there. I recently picked up a used bandsaw and it needs a bit of work. I’ll definitely be referring back to this.
@jimgill1105 2 жыл бұрын
This is really helpful - good demonstration and Q&As. I'll now reset my bandsaw - replace the blade is a must do!
@scorpionscorpion8099 2 жыл бұрын
great demo , thanks for the excellent in depth information :-)
@amosluyk 2 жыл бұрын
Just what I need right now :)
@hjworkshop1 2 жыл бұрын
Sometimes the ticking is because the wheel needs tightening- that’s what happened to mine. But you could only really hear it when the bandsaw blade was tensioned up.
Infinity Circus
Рет қаралды 6 МЛН
Russell Platten
Рет қаралды 1,3 М.
Двое играют | Наташа и Вова
Рет қаралды 1,4 МЛН
Özden Söğüt
Рет қаралды 8 МЛН
Yemangos!KYD
Рет қаралды 9 МЛН