You are an awesome man in everyway. Your video is clear and to the point. You are an outstanding mechanic, and not a bad videographer. Above all, your presentation is EXCELLENT! And you sound like a pretty nice guy. Thanks for taking the time to post this!

Simple, concise and organized without a bunch of filler.... awesome video man... thx

Your knowledge and ability to convey that knowledge is impeccable. The camera person is spot on too :) Thanks for sharing

Thanks for your video. It was really helpful. I was able to replace the belt without removing the clutch. It wasn’t easy, but I was afraid to make a mistake with the wiring issues. I also only loosened the “vee” (brake?) pulley to get the old belt off and the new belt on. My X320 seemed to be missing the guide that is next to the brake pulley. I will check on that in the morning. I wasn’t able to find a spring puller, so I cut four or five inches of wire coat hanger, sharpened the end, bent it into a hook, and used vice grips to hold it. It worked fine. I would not have been able to complete the job without your video and one other that is on KZfaq. Thanks a million!

this is where you need two hands , man dude you are awesome

You are a perfect match for making fiber clear, exceptionally worded instructional videos! My drive train belt broke on an X380, and there are some differences to your X320, but your close-up, amazingly focused video shots made this job far less painful than trying to find a John Deere parts image showing exactly where the belt travels...I never found a picture. Thank you very much!!

Great video and best of all, no stupid music playing in the background!

Don’t know how anyone would dislike this video. A lot of detailed information and a job well done. Glad I clicked on this.👌had no idea there was a drive belt there. I learned something today and feel good about it.

Thanks for the video. It really helped me finish the job I was kind of stuck half way through on. I like being able to clearly see each step of what you're doing.

Great video, you did not go off topic, and were straight to the point, great teacher, thank you for the great video to help others.

Thank you very, very much for making this video. It showed me many things that saved me time trying to figure out. At 12:08 you were lucky enough to squeeze the belt between that bar and the bracket. On my mower there is literally no way to do that. It simply is too small a space to fit that into. I had to figure out how to loosen that bar in order to get the belt through. That took awhile to do. Too bad JD doesn't try a little harder to engineer that space to be a little bigger. I realize you are so used to being one-handed that it's pretty normal for you but it's amazing to watch all the techniques you've come up with to utilize your left "hand" to do the stuff you need to do. Again, fantastic video. Thank you.

THANK YOU! I just got done replacing the idler pulleys on my X304 (same as the X320). What a pain in the butt, not at all "user friendly, especially the V one! After nearly 3 hrs doing that job, I just couldn't bring myself to do the drive belt. Thanks to your video, I feel confident I will get that job done with a minimal amount of frustration.

Thank you sir. Thorough, complete, perfect. Empowered me to do something I did not want to do.

Very easy to follow, thank you so much for making this a simple job. Your abilities are very admirable, truly inspirational to others, thank you!

Exactly what I was looking for on my 2010 X320 with 675 hours on it. I was pulling my transaxle to clean, change fluid and internal filter when I discovered a very worn drive belt. Great tutorial 👌 already liked and subscribed. Hope to learn more from your future videos? Thanks so much!

What a great video! Thank you. Going to try this on my X300. Other videos on this topic would have you taking off the steering. I hope you make more videos on all the things in your expertise.

Thanks for the Video ! Got a drive belt to change on a 340 and without your video I would have been at it for a long time !!

Wow! What a chore! I'm going to tackle this on my 2010 X324 soon. I've been putting it off for a year now (living on borrowed time!)

I have a 320 that's 8 yrs old and I've never had to replace a belt yet. But I know I will soon enough. I've worked on a lot of stuff and I don't really dread this belt replacement but I have to say that doing this with one hand is the most impressive thing I've seen on youtube in a long time.

I enjoyed your video. Keep up the good work enjoy the 30 minute ones

Fantastic video! After 1.5 hours of use on my new X350 the machine won't go forward or backward and the spring for the brake assembly was laying on the ground. Your video was excellent in helping me identify the part and I hope the problem.

Very helpful. You have saved me a lot of time and probably some blood. Great work by your camera operator also.

Outstanding video you did a great job explaining the entire process.

Great video. Thanks for the detail comments. I'm able to finish my X304 clutch replacement with confidence after the pulley dropped off and I didn't know which way was up.

Thanks for another JD video.

Well done. Great walkthrough

I was thinking of doing this job but after seeing this I might call around for an est. You video was the best Ive seen

Very helpful video. Developed a problem on my X324 and thought it would be an easy fix. Not to be, and this has saved me a lot of time and frustration. Thank you.

perfect video presentation. Thank you for making it for us all, couldn’t ask for a better explanation

I'm thinking I really need a hoist! Great video, thank you!

Excellent video! Very specific, which I greatly need… keep em’ coming. Thank you 🙏

Thank you for your great and helpful sharing😃👏

Thank you for sharing your knowledge with the world, great job, outstanding video. Saludos desde Aibonito, Puerto Rico 🇵🇷 USA🇺🇸.

I found on my x350 the tension spring on the serpentine pulleys is why my drive belt falls off, I need to know how to attach it so that doesn't happen anymore. I'm getting ready to put it back on again and this is the fourth time in 172 hours since bought brand new. Thanks for your video it really helped me the first time getting everything back in place but that tension spring is the culprit on my tractor.

Great video! I was going to replace the drive belt on my neighbor's X330 but after seeing your video he is going to have to take it to John Deere! I'd never get it back correctly! Plus lose stuff! Even with pictures & videos! I can do the old mowers but there's way too much to remove & remember where it came from, even with pictures! I replaced the mower deck belt & blades on the 330 but the drive belt is above my pay grade! I have the means to put the mower vertical but I don't understand how you & other mechanics work on a machine w/o cleaning it first! Man! I power-wash 'em all, top & bottom first thing & let the sun dry them for a day or so! I would have lubed many points but you got the repair done 1st. class! But I'm retired & do gratis work & not under any schedule like a bonafide mechanic is! When I'm done is when it's ready to pick up! The video is clear & audio is precise! It's amazing how God has given you the talent to do your work with only 5 fingers! PTL!

Excellent step by step, life saver video. Thanks!

Very good video and you did a Awesome job explaining what has to be done

Great video, thank you

Good video thanks for the help. Made the job easy

Great video. Thanks.

Great expert Instruction!!!

Thanks. Big help!

Nice video! I have the X304 with four wheel steering and was wondering if it can be hoisted upright like you did with the 320? Also are there any issues with battery acid or engine oil leaking out when it’s hoisted up?

Thank you. I have been putting this job off because of how deep this goes. Your video is so complete that I'm ready to tackle it. I have a 2008 JD X300R. Do you know if the entire underside is exactly the same? Thank you again!

Wow wow that’s good video bro

Thank you!! Great video

Why hasn't Deere hired you yet to do their video's ?? GREAT TUTORIAL....you must have teacher dna on your genes !

🇨🇦

I have a 05 john deere l118 and every time I release the brake the engine dies.

JD did a horrible job on this machine. You shouldn't have to dig this deep for a belt. Shame on them but great video.