Thank you for all the efforts you go through to show us new to the laser community, as specially the assembly of Xtool D1.

Thanks for all of your videos. I successfully put my D1 pro 10w together yesterday, and my first test burn was a success 🙌. I will keep watching and learning!

Just now had time to put my d 1 pro together. Have been building a rolling cabinet enclosure for it, the top patterned after your enclosure. I watched this video and assembled my Pro step by step just as you went through it. Thank you so much for making this video for us in the field. I never had to open the instruction book....you know how men are with instructions!!. I will be watching your next video on configuring it. Thank you again. You Rock!!!

Thank you for making this video! It was so easy to follow along with you. And I especially appreciate you using the tools that are included. I will be watching your other videos.

Thank you for sharing this. The way you prepare the timing belts first plus the hint on the view through the gap of the coupling before pulling tight these screws made all the difference for me. Now I get clean results. No more wobbling, no more unwanted lines. Just as clean as you would expect it. I love it. BTW I am on the 10w. Maybe you should even repurpose just that part of your great assembly video and give it a title related to the problem/the bad result so people can find it from that direction. I bet you would get a lot of views for that short one and it would help your channel like you help us. Thanks again. Keep going. I wish you lot's of success.

Thanks so much for sharing this video! I wish I’d seen this before putting mine together today. You still saved me a bunch of time on the parts I got stuck on. Getting ready to hook up my air assist and order your jigs … great job on your videos! They’re always very informative and help a TON!

Thanks for this video. I followed this step by step as I put my xtool together. Those white connectors were indeed a huge pain to put in. Your idea to use the calipers to make sure the belts were in sync was very helpful (I also learned how to use calipers). I ran into an issue trying to connect the air assist nozzle to the laser. It wouldn't seem to lock into the threads. Luckily there were instructions in the back of the guide showing how to take off the laser tip to clean it. So I took the laser tip out, connected the air assist, then reconnected it. I did some initial burn tests and things are looking good! Thanks

Thank you so much. I have the D1 I got in March but it is still in the box. Feeling a little more comfortable in putting it together. Just sure where I'm going to keep it. I don't have any heat in my work shed and it get pretty cold here in Canada in the winter. Thanks again

Good Job! I will be putting my new d1 pro together tomorrow. this is very helpful. Thanx for sharing. you Rock!.

I did the same thing with the manuals. I was like "Uh... this isn't enough information" before I realized it was the wrong guide. The Quick Start Guide is actually really well made and the illustrations are fantastic. Was easier to put together than my Creality Ender 3D printer for sure. You can tuck the included screwdriver into one of the rails behind the wire and it will operate without it getting in the way so you always have a nice little driver on hand to tension belts.

Thanks for posting about the belt tensioner’s! I checked mine and I was off by about an eighth of an inch from the other side

great job David well done

The supplied screwdriver is magnatized, it was great for picking and sorting the screws. I know that's Johnny come late info, but for any newbees it might help, worked for me. I just upgrade from 5 watt to 10 watt pro.

Thank you for sharing..lol I have tiny fingers and the worst part of the assembly was the color coded plugs took me forever to attach them.

Thanks for the informative video. One thing, when you push the gantry all the way forward, the right side hits a portion of the motherboard. This caused a slight difference between the two sides. I went back and loosened the one side of coupler and readjusted with a ruler. Have not turned on machine yet.

GREAT, David! Now, lemme "axe" you a question. Will you give me/us an avenue whereby we can PAY you for the design for your next enclosure? I bought the xTool enclosure for my D1, but I really like the way yours works. Too, I model a lot of what I do after how you do things, so I'd like to have as much uniformity as possible. Another quick Q that I just thought of: Will you make your new enclosure taller so as to accommodate a camera that you can focus without having to install a fisheye lens? Oh, doggone it...one more thing. On the xTool Live thingie Wednesday night, did you hear them refer to your outfit as "The Clock Shock"?? I thought that was so funny how they pronounced it. Dr. Larry Anderson • Tupelo, MS

Thank you for all the great info! The enclosure build used to be in Etsy store, but don’t see it anymore? Is there somewhere else we could get it?

U musta been an educator in some other life. Darn it but ur good and thorough. Good job.

What do you make your jigs out of? I want to use yours but need to know what material and thickness you used. Thank you so much. I just got my D1 Pro 20W and have never used a laser so I will be watching for all your videos.

Thanks for the video. Just ordered the d1 pro 20w and would like to get a longer usb cable before it arrives. Can’t find anywhere online what ends they use on the usb cable. Can you please tell me?

I understand how to adjust the belt tension, but I can't find anywhere that suggests the _Correct_ belt tension. ?

Hello just wondering if you made the blueprint for the enclosure on the D1 Pro? I’m a newbie and I don’t know what I’m doing. I want to thank you for getting me through the assembly process now all I need is to learn how to use the XCS so I can test it. my husband is on me about having the D1 pro in the house. He is mr safety. He thinks that I might burn the house down 😮. No space in the garage.

Will this template system work with Tool enclosure?

I’m stuck at putting the screw into the tensioner. It’s as though there’s nothing there to catch it on the one side. I see the block but there’s not a screw hole. Help please.

What is the purpose of the jig? So it doesn't move? Sorry for the dumb question.

Did you buy the laser or did they give it to you?

Yup hardest part of the entire build is those little damn connectors !!

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼🍺😎

mmm or make it easy and square the X to the Y after set up and then ensure tightness of the rubber track... no need to make it this complicated... just saying.. sometimes when you make things this difficult, it scares people off when in reality this should be a 15 minute install.

Hi, I liked the video, but, friend, it is 2022; get an air conditioner. I live in Dallas, TX, and I wish that my temp was only 93 degrees.