Yamaha Raptor 700R Engine Build Part 3: Clutch Build and Water Pump

Yamaha Raptor 700R Engine Build Part 3: Clutch Build and Water Pump | Partzilla.com

Рет қаралды 33,030

5 жыл бұрын

See the components for part 3 of our Yamaha Raptor engine build here: bit.ly/Yamaha-Raptor-Engine-Bu...
Note: our phone number has changed! Call us at 1-229-584-0046 for help finding the right parts for your maintenance needs.
In part 3 of our 2017 Yamaha Raptor engine build, we’re going to build the clutch on our Yamaha ATV. then, we’ll install the water pump and the oil filter.
Take a step back and see us install the shift shaft and oil pump: • Yamaha Raptor 700R Eng...
See the Yamaha Raptor engine build from start to finish here: • 2017 Yamaha Raptor Eng...
Check out these diagrams to see where we’re working:
Oil pump diagram:
www.partzilla.com/catalog/yam...
Clutch diagram: www.partzilla.com/catalog/yam...
Water pump diagram:
www.partzilla.com/catalog/yam...
VIDEO HIGHLIGHTS:
Installing the drive gears - 1:50
Installing the clutch basket - 5:50
Building the clutch - 7:25
Installing the crankcase cover - 11:15
Installing the water pump - 13:46
Installing the oil filter - 14:45
Find thousands of Yamaha ATV parts here: www.partzilla.com/catalog/yam...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2017 Yamaha Raptor 700R, but you may have similar steps for your Yamaha ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
Yamaha R6 engine build playlist:
• Yamaha R6 Engine Rebuild
Yamaha YFZ450R repairs:
• Yamaha YFZ450R Repairs
#yamahaatv
#partzilla
#atv

Пікірлер: 20

@raptorgamer8878 5 жыл бұрын

Please keep making these's type of video's i do watch the intensely and enjoy them

@AchikSarih 6 күн бұрын

Merci beaucoup ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

@sobamani1244 Жыл бұрын

Very well, thanks a lot 🙏🙏🙏🤗

@nano19951 3 жыл бұрын

Greetings to you from the heart.. We thank you for your efforts and your most good explanation 🌹

@davidnewman9974 7 ай бұрын

Hey John what way does that oil seal go that the plate with 2 screw hold in ? I've torn it 2 times when putting the clutch over back on ?

@williamrickerby9149 Жыл бұрын

I would of used lock tight on the crank shaft main nut because they come loose and would have nipped it up to 90 ftpd.

@vartankuchinskiy5650 5 жыл бұрын

Top!

@carlos-iw8xi 3 жыл бұрын

Seu video são nota 10

@mehranamini8491 2 жыл бұрын

you never put back the wire holding the cousin spring, before putting back the plates

@merquisonmototardivo5806 5 жыл бұрын

😊 muito bom

@sedrickdavis1617 2 жыл бұрын

Hey love the videos, very helpful just wondering do the raptor 660r an raptor 700 have the same engine besides the bigger piston ??

@fuk3d4Lyfe 4 жыл бұрын

little late on this but, is there a reason to leave out the retainer wire that holds the first few rings and fiber disc to the clutch basket?

@stevesirak 2 жыл бұрын

Ahhh you skipped putting in the wire on the clutch. Dam

@corymacdonald383 4 жыл бұрын

What's the engine going into?

@beerbellyracing133 7 ай бұрын

Ya that's the real question

@ghulamfarooq3587 4 жыл бұрын

😎👍👍👍👍

@vladstefan9702 3 жыл бұрын

I have a yamaha raptor 700 I have problems with it when the engine warms up it refuses to start, it only starts if you press the accelerator and it works interrupted

@PartzillaParts 3 жыл бұрын

if you are having trouble starting the engine when the unit is hot you may need to preform a valve adjustment! check out this video! we show you exactly how to do the job! kzfaq.info/get/bejne/ntaji7ycz9S-e5c.html