11 ай бұрын
Жыл бұрын
2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@markbullock3741 14 сағат бұрын
Most irritating music on KZfaq
@TravisNarine-cz3du 13 күн бұрын
Is the light 12 volt?
@WRECKERMANDAN 13 күн бұрын
Yes, as most vehicles are a 12-14v system.
@cadetcadet1814 15 күн бұрын
Does that group 1/group 2 syncing process work for most strobe light manufacterers or just this specific company?
@WRECKERMANDAN 15 күн бұрын
It can work with other manufacturers but, not all. I believe Whelen has some options that can also be grouped. I have some selections on Amazon through the link in this videos description. Just make sure to check the details before purchasing. Hope this helps. 👍
@rileyregan6490 17 күн бұрын
i am trying to setup some lights on my headache rack and i would like to have it on a rocker switch if i get them wired in sync with the yellow wire would i need to also have power able to go to the yellow i dont plan on changing groups
@WRECKERMANDAN 17 күн бұрын
Get them on the same group if you want them to have the same pattern at the same time. Run one rocker switch for the power (to turn them on/off) and then piggy back that same (input) power over to another rocker/momentary switch with the yellow wire on it. With this setup, one switch will control on/off, the other will allow you to change the pattern. 💪🤘
@marcodevries4481 Ай бұрын
Epic people fails
@ryankutzbach9142 Ай бұрын
Really appreciate your thorough documentation of this process; it answered a lot of my questions about the install. Thanks!
@WRECKERMANDAN Ай бұрын
Thank you for the kind words! Glad you found this helpful. 🤝
@ryankutzbach9142 Ай бұрын
Thanks for this series!
@WRECKERMANDAN Ай бұрын
You are very welcome! We enjoyed this build. Genright's products are top notch. Good luck with your build.
@Louie2309 Ай бұрын
What’s with that fkn shit music?
@shanecedotal5558 2 ай бұрын
wondering cause i have a job i have to do similer to this and dont really know what to charge him
@shanecedotal5558 2 ай бұрын
how much would a job like this cost
@WRECKERMANDAN Ай бұрын
Im not accurately able to give you a specific price as it depends on many factors. Amount of materials used, what type of materials used, manufacturer/products used, local shop/labor rates, local tax rates, time it taKes YOU to complete said job, etc., etc. 🤷♂️ You could always call around to a few local shops and get their quotes on a similar job and go from there. Sorry for the late response and vagueness. Hope I could be of atleast some help. 🤷♂️
@thejim3501 2 ай бұрын
What did they charge you?
@WRECKERMANDAN 2 ай бұрын
I cant remember exactly. Was about the usual price of a tow + tip. I think I remeber him hooking me up a bit though due to a bit of a previous working relationship. 🤷♂️ Some tow companies have specialized insurance for moving tool boxes which I recommend looking into while comparing.
@kevinpenner7125 2 ай бұрын
so, What do we do when the short life batteries give up. I've replaced batteries but they wont charge.. help.
@WRECKERMANDAN 2 ай бұрын
That is something you will have to work out with Snap-on. They should make good on it. My dealer knew when these came out they had issues and worked out something with the guys who had purchased one that was starting to have issues. I too have had mine serviced. 🤷♂️
@91steelblue 2 ай бұрын
LED'S ARE NOT STROBES!
@WRECKERMANDAN 2 ай бұрын
Absolutely correct! 👍 These are LEDs attached to a brain/computer that controls many different strobing patterns. Its certainly not an Incandescent Strobe. 🤷♂️🤣
@andrewlong6825 2 ай бұрын
We're all of these filmed with the same potato?
@WRECKERMANDAN 2 ай бұрын
🤣🤣🤣 Some are much older videos.
@davebaker9128 3 ай бұрын
I wouldn't just write off lift kits, all aspects of said lift need to be addressed, such as clutch, shifter, steering components which can all be adjusted/modified to accommodate a lifted body, I have done this sort of thing (safely) on various vehicles
@chikilin9275 3 ай бұрын
Did you need to do and alignment after changing these parts?
@WRECKERMANDAN 3 ай бұрын
No, this does not adjust or affect alignment.
@chikilin9275 3 ай бұрын
Thanks so much for the answer ❤👍
@WillsGarage843 3 ай бұрын
what kind of welder were you using for this? 110v?
@WRECKERMANDAN 3 ай бұрын
Its a 220 Lincoln Mig SP175 I believe. At first we thought to just use the flux core my machine was already setup with. I was able to talk my dad into completing the cage with a gas setup for some cleaner welds. When I first switched the welder over to gas I fogot to reverse the polarity so I had some grinding to do. 🤦♂️🤷♂️🤣
@user-fn7zz1ym3p 4 ай бұрын
After the vehicle falls back below 25 mph, lets say at the first red light., does the pto then turn back on?
@WRECKERMANDAN 4 ай бұрын
No it does not. You would have to reactivate the switch.
@ClearGalaxies 4 ай бұрын
I like GoPro
@ClearGalaxies 4 ай бұрын
Audio levels 🎶⬇️ 🗣⬆️
@Zewestcoaster 4 ай бұрын
LOL, 14:25 valuable information earned by trial and error buried in a youtube video.... You'll have to make a tips and tricks video for upfitting ram trucks for dummies. I'm busy researching my new truck and trying to figure out the value of the VSIM module....
@o.l.ashman9696 5 ай бұрын
2:13 the tank towing a Semi isn’t a fail, it’s a win
@ravenXO 5 ай бұрын
I understand removing the tools to save the drawer rollers but i would simply remove all the drawers tools in place with a friend and stack them back to front in my truck with a moving towel and strap. Definitely would tow the box like shown though. Just hate reorganizing tools once you have a good setup.
@quadtraxxx 5 ай бұрын
Brilliant, i've just learnt a lot!! Now the groupings and the sync wire all makes sense!! Great video, thanks for posting!!
@teodociofortanel7882 6 ай бұрын
how long the chassis needs to be?
@WRECKERMANDAN Ай бұрын
Your product should have come with a Builders Installation manual from the manufacturer that will detail all the cut-off lengths per bed design and chassis. If you do not have the booklet, contact your products manufacturer.
@Throughthelurkingglass 7 ай бұрын
I was at some shop, a vehicle was being dropped off a tow truck, cable broke, 10 feet away, coming straight at me, jumped at last second, wouldve been directly between it and the wall. Ive had 4 or 5 of these "near deaths" ive avoided, especially while driving only 33 yo. Hope they never get me🪖
@WRECKERMANDAN 7 ай бұрын
Stay safe out there. 🤞
@ashtonsharpe2502 8 ай бұрын
Can you do a detailed video on building the wire harness and specifically connecting wash light in sequence to said harness? Your work is top notch. I wired up my grill and bunker strives last night and I couldn’t get it nice like I wanted with but connectors couldn’t get them to “y” nicely. Ended up twisting sodering and heat shrinking everything but it’s not near as clean as I’d like
@josemoreno3334 8 ай бұрын
Shit happens.
@richardhill1377 9 ай бұрын
Really annoying twittering noises from your PC
@WRECKERMANDAN 9 ай бұрын
Probably the quality ASUS cooling fans you hear. 🤦♂️ Just finally replaced one of them. Now the other is making a lil noise. 🤬😫🤣🙄
@thentd2826 9 ай бұрын
Luke Whaley death glass power glitter explosion dynamite crash Lonoke atomic bomb dewayne purple star copper shit lash
@WRECKERMANDAN 9 ай бұрын
🤔
@anavarzau4984 9 ай бұрын
Thanks for the video LOL I just bought a Classic 55inch with power draw and it weighs 270kg empty.. so if I end up leaving my job I’ll have to do this to move it also 😮
@zaheersarwar7815 9 ай бұрын
I bought some strobe lights, but the wires are so thin and brittle. When joining them it's like literally hair strands!
@WRECKERMANDAN 9 ай бұрын
I would recommend soldering them in that case. just solder and heat shrink.
@zaheersarwar7815 9 ай бұрын
What power probe are you using ?
@jacobshields6594 9 ай бұрын
I'm looking for the same answer! :)
@WRECKERMANDAN 9 ай бұрын
Sorry for the late response. It is the Power Probe 3. There is an Amazon link in the videos description for it. Would be awesome of you guys to help out my channel by using my link. 😉🤘
@Nemesiss372 9 ай бұрын
The music makes this really hard to watch. Jeez, mute it.. it’s awful.
@susanhenderson2322 10 ай бұрын
Just moved mine, very stressful but planning ahead and having a backup plan helps.
@timtebow4775 10 ай бұрын
Always been disappointed that these cheap Chinese struts only last a few years. In the old days we had heavy duty springed hinges that never needed to be replaced.
@WRECKERMANDAN 11 ай бұрын
Want to see more home improvement videos? Check out my playlist here: kzfaq.info/sun/PLBLRHSGiDCidZuXKLNoNvggS_dvc62kxK
@WRECKERMANDAN 11 ай бұрын
Check out my playlist of Jeep videos along with the entire GENRIGHT cage install: kzfaq.info/sun/PLBLRHSGiDCic8H3zlVfEZw2KKQ4byXAGg
@jimhoran5445 11 ай бұрын
Nice welds!
@ToxicGaming-cp5oc 11 ай бұрын
My boss bought that truck . I’m the driver We are in Chico
@AutoTechOCD 11 ай бұрын
I have the same issue with charging the last light bar. I thought I was the only one who had that problem. The light works fine though. This was a good review buddy...
@WRECKERMANDAN 2 ай бұрын
Thank you for the kind words! Glad you enjoyed the vid! Talk to your Snap-on guy....Ive had mine serviced for the same issue. They should make good on it as they new these had minor problems when they came out. I have found that if I leave it on the charger long enough I will eventually get that last LED to light/charge.
@WRECKERMANDAN Жыл бұрын
Please SUBSCRIBE so you DON'T MISS THE NEXT VIDEO!!! Check out my off-road fails and crashes video here: kzfaq.info/get/bejne/h59hhqt9l-DXhmQ.html
@WRECKERMANDAN Жыл бұрын
Please SUBSCRIBE so you DON'T MISS THE NEXT VIDEO!!! Check out my off-road fails and crashes video here: kzfaq.info/get/bejne/h59hhqt9l-DXhmQ.html
@WRECKERMANDAN Жыл бұрын
Please SUBSCRIBE so you DON'T MISS THE NEXT VIDEO!!! Check out my off-road fails and crashes video here: kzfaq.info/get/bejne/h59hhqt9l-DXhmQ.html
@lifebehindbars6283 Жыл бұрын
Wonder if the hardtop will fit over that. Your vids on the cage are helpful. Appreciate it 👍🏻
@WRECKERMANDAN Жыл бұрын
Thank you for the kind words! Im glad my videos could offer some value to you. 👍
@WRECKERMANDAN Жыл бұрын
Yes, according to Genright, the hardtop is suppose to still fit. We have not tried it yet.
@WRECKERMANDAN Жыл бұрын
SUBSCRIBE so you DON'T MISS THE NEXT VIDEO!!! Check out my off-road fails and crashes video here: kzfaq.info/get/bejne/h59hhqt9l-DXhmQ.html
@juliantongol6296 Жыл бұрын
Is it possible to control how hot water comes out?
@WRECKERMANDAN Жыл бұрын
Not sure exactly what your asking. You can control the temp just like any other shower valve. 🤷♂️ Delta did reverse the handle so the bottom of the handle swings towards the temp side that you want. They also discontinued the reverse ball for this series. 🤦♂️
@coastxpressinc.3474 Жыл бұрын
I need help, I have 2015 Dodge 5500, 6 7l Cummins. PTO used to turn off every 30 seconds and now turn off in 10 Sec. Suppose to Ground OR/BR wire in brown plug, but surprisingly I don't have no Green, Brown or Black plug in VSIM.
@WRECKERMANDAN Жыл бұрын
If you dont have any of the colored plugs installed, the builder failed to upfit your truck with these. You can possibly still find them from the dealership or a wrecking/dismantle yard.
@coastxpressinc.3474 Жыл бұрын
@@WRECKERMANDAN Thank You.
@barrydonewar3785 Жыл бұрын
Jesus Christ, stop BSing and get to the point!!!
@pogojose23 Жыл бұрын
Where did you get the mpunts
@WRECKERMANDAN Жыл бұрын
I made the mounts myself. I cut them from aluminum angle.