No, it was parked outside for 11 years

Thank you Milos!

Do it, it's a good adventure 🙂

I don't know, we'll see 😃

In winter, I heat it to about 20 degrees Celsius and after 4 hours it is 15 degrees. Enough for work

That's how the M70/M73 is designed. Very little spacing between each cylinder.

Thank you sir 🫡🫡🫡

Hi Jukka. Thanks for the advice, if you have any ideas, feel free to share them with me. I will need it :)

@@synthwavegarage As gaskets, I used the original ones, as well as Victor Reinz and Elring. I also ordered the Ajusa sets, I used the gaskets of the distributor head housings, the original ones were not available. I bought a lot of parts from hubauer. I changed the 6mm 8.8 bolts to better 10.9 bolts. Fortunately, I didn't have to change the bearings, I measured them all, they were within specifications, there were no signs of wear or scratches, I renewed the bolts. The oil control rings of the M73 engine are different, the piston holes for the oil control rings are also different, I am not aware of any oil intake problems. Aeromotors has m70 Goetze piston rings, elring cylinder head bolts and Victor Reinz head gaskets, camshaft and crankshaft gaskets at reasonable prices. You can also find Ajusa at Aeromotorss. Yes, you can find parts for these if you can search and take the time.