Gripset 51 - The Origins
5:05
2 ай бұрын
Quality Control & Industry Updates
59:29
Wet Area Failures | Application
8:13
Wet Area Failures | Design
9:21
Жыл бұрын
Holiday Greetings From Gripset
1:27
How to Waterproof with Waterstops
3:25
The Wondercap Inventor: Les Howson
18:17
How to Prime Like a Pro
4:16
2 жыл бұрын
Пікірлер
@marktubb6410
@marktubb6410 2 күн бұрын
How do I get a start in waterproofing. I'm a boilermaker looking for a change
@-PORK-CHOP-
@-PORK-CHOP- 6 күн бұрын
What temperature range can it be applied in ?
@benwhyte7662
@benwhyte7662 Ай бұрын
How would you go about dincel or similar pvc retaining walls
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd Ай бұрын
Hi Ben, thanks for watching and reaching out! There's 2 options! Option 1 is a liquid system, you can use liquid membranes where the crucial step is the primer, we recommend using: Gripset OP Primer: gripset.com//products/gripset-op/ Option 2 is to use the sheet membrane, we recommend the BRW HD system that will adhere directly to the PVC without any primer: BRW-HD: gripset.com//products/gripset-brw-hd/ Hope this helps and happy waterproofing! :)
@charlescamen5225
@charlescamen5225 Ай бұрын
looking at the finished application in the final seconds of the video, was the surface prepared adequately for the membrane? I see lumps and protrusions in the finished application as well as the mortar lines. how flat and smooth is the preparation to be? Thanks
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd Ай бұрын
Hi Charles, before commencing the application, the important step is surface preparation, you need to fill any holes and voids before applying the membrane over, they should be flush and level with the wall, refer to the opening scenes where the joints were filled and scrapped for a flat even surface. Hope this helps and thanks for watching! :)
@fufuelhatch444
@fufuelhatch444 Ай бұрын
How do I send photos I’m about to water proof my bathroom but my piping drain doesn’t look like that 😢
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd Ай бұрын
Hi Fufuel, please reach out to [email protected] and send through your photos. Our tech team will be able to assist you promptly! Happy waterproofing :)
@glennd0
@glennd0 Ай бұрын
Legend Bloke Phil, such a shame to lose him to the Business and to the Industry.
@andreaksenov8397
@andreaksenov8397 Ай бұрын
The SFG videos were and are still very good.
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 11 күн бұрын
Hi Andre, thank you for watching and for your support! :) Happy Waterproofing!
@PDHomes
@PDHomes Ай бұрын
these product like xypex only effective for around 10 or 20 percent
@juandelacruz1891
@juandelacruz1891 2 ай бұрын
your explanation is hard to understand for. diy ordinary person, so fail
@avp.777
@avp.777 2 ай бұрын
Thank you,you have the best video from all which I found. ❤
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd Ай бұрын
Hi Avp, thank you for watching! Happy waterproofing :)
@jamescolton1085
@jamescolton1085 2 ай бұрын
Have you considered or used 100% silicone roof paint as a liquid membrane substrate? Why would you select or avoid it?
@vanessas6827
@vanessas6827 2 ай бұрын
Im still unclear..is a waterstop something thats visible after the project is complete?
@Himal_Rulz
@Himal_Rulz 2 ай бұрын
Joint should be sealed rather than sticking that fiber
@Aramiak
@Aramiak 2 ай бұрын
I learned so much from that. Cheers.
@amrit0
@amrit0 2 ай бұрын
Which Gripset is best for exterior and interior plastered walls? Can it be painted on or have to apply undercoat water based on concrete plastered walls before applying Gripset?
@ashperks2608
@ashperks2608 2 ай бұрын
Great to see Phil's smiling face again.
@ResellerLuLu
@ResellerLuLu 3 ай бұрын
Hi, I'm building a plywood kio pond - above ground. I was thinking of using Gripset Betta Waterproofing Membrane Bitumen Rubber. If I do use it does that mean will not need a pond liner? Will it retain the water in the pond? Pond - 2 x 1.5 x 1 meters. Thanks.
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 2 ай бұрын
Hi Reseller Lulu, we advise speaking to the manufacturer as we do not sell this product -> Within Australia - 1800 810 123 New Zealand - 0800 474 7738 Worldwide - +61 8 6272 3800 Thanks for watching!
@ResellerLuLu
@ResellerLuLu 2 ай бұрын
@@GripsetIndustriesPTYLtd thanks
@sunnyBLR
@sunnyBLR 3 ай бұрын
Can epdm sheet go on top of liquid rubber? What kind of primer is needed? Or can i lay sheet on top of liquid membrane and hold it down with just floating deck?
@dennisobrien8536
@dennisobrien8536 3 ай бұрын
May i ask a question please, do i need to seal the Box Gutter Downpipe to the Sump?
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 3 ай бұрын
Hi Dennis, thanks for watching! Yes! We recommend extending membrane as far as practicable to create a continuous seal, we suggest BRW PF tape to seal transitions and joints hope this helps and we appreciate the support!
@johnmaloney9368
@johnmaloney9368 3 ай бұрын
we can always learn something good video, keep up the good work
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 3 ай бұрын
Thanks for your support and watching! Happy Waterproofing :)
@michaeladams2077
@michaeladams2077 3 ай бұрын
How long should I wait to apply after finishing grout and concrete filled holes ?
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 3 ай бұрын
Hi Michael, thanks for watching! If proprietary product used refer to TDS and reference cure times, we recommend waiting for 'full cure' otherwise for non-proprietary 16 days for 10-20mm deep patches as a rule of thumb, hope this helps and appreciate the support!
@SuperSkandale
@SuperSkandale 3 ай бұрын
Question: My contractor put a vapor open membrane on the outer wall on a bathroom we are renovating. I found out about this when checking up on his work. Is it possible to put a new membrane layer on top of the old one but only one that does not let through vapor ? We know the brand and that it is water proof but not vapor proof and in this climate the membrane towards the outside and cold rooms should be vapor proof as well as water proof. This is a recent thing. The membrane is not a sheet but the stuff you put on with a pencil.
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 3 ай бұрын
Hi Super, thanks for watching! Please email what you specifically have applied and where you've applied to [email protected]
@SuperSkandale
@SuperSkandale 3 ай бұрын
​@@GripsetIndustriesPTYLtdIt is PCI Lastogum some german brand. The light pink one.
@nehalrshah
@nehalrshah 3 ай бұрын
Phil asks questions to Shaney, knowing answers already, and then chips in the end with detailed answer :) Great teacher.
@zintuplet
@zintuplet 3 ай бұрын
I’m just having a tiled floor. I have a metal water stop at the door. It’s a small room 1.7 x3.4. Do I need another water stop closer to the shower? The shower is directly in front of the door.
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 3 ай бұрын
Hi Zin, Thanks for watching! You need to refer to AS3740 and the BCA as the requirements for waterstops, the provisions for waterstops can be found here! Typically they are applies at the extremity of the showers and doorways but you should always reference the above! Happy waterprofing :)
@SLim-nw9wc
@SLim-nw9wc 4 ай бұрын
If using your Xpress Lay membrane, will I need to use the BW square for the puddle flange?
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 3 ай бұрын
Hi SLim, you will not as this will bond to the PVC and you will be able to cut to expose the waste!
@SLim-nw9wc
@SLim-nw9wc 3 ай бұрын
@@GripsetIndustriesPTYLtd Thank you. The Xpress Lay membrane has a criss cross pattern on it and I wanted to smooth it out before glueing down the vinyl flooring. Could I use feathering finish, smoothing or leveling compound on the Xpress Lay membrane?
@Steedo12
@Steedo12 4 ай бұрын
Loving the videos
@Syedqasimalibukhari
@Syedqasimalibukhari 4 ай бұрын
❤❤❤
@jaylewis2623
@jaylewis2623 4 ай бұрын
What is bond breaker ??😊
@marktran5076
@marktran5076 5 ай бұрын
Thank you Gripset for the very informative video. I have been renovating bathrooms in the last 25 years, some bathroom (built in 1990s) we removed have yellow tongue but it is in good condition if the yellow tongue and waterproofing was installed correctly. I always debate whether to leave the yellow tongue or advise the owner to replace it with scyon (with additional cost). I have been googling to find a suitable answer to advise my customers about yellow tongue but haven't been able to find the right answer as some site says it is illegal and some site says it is ok to use but not recommended. Thanks to your video and your answered comment (from other video) I have found the right advice to give to my customers.
@marktran5076
@marktran5076 5 ай бұрын
Great video. Short and informative. I’m trying to get a clear answer on this as some websites mentioned it is illegal to use yellow tongue in bathroom while other saying that it is not recommended but still meet the building code as long as waterproofing is done correctly. Could you able to give me the answer for this in 2024? Is yellow tongue compliant for bathroom flooring in 2024. Really appreciated.
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 5 ай бұрын
Hi Mark, thanks for reaching out, we answered this query above, please take a look. We have tagged you for your convenience, thanks for watching! :)
@gleneaton8914
@gleneaton8914 5 ай бұрын
does the orientation of the corflute panel matter?
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 5 ай бұрын
Hi Glen, it does not necessarily. We recommend all the joints to be taped up! Thanks for watching :)
@user-mp4eg1mb9i
@user-mp4eg1mb9i 5 ай бұрын
Isnt green tounge what your suppose to use on internal wet areas?
@marktran5076
@marktran5076 5 ай бұрын
I'm trying to get a right answer for this so I can advise my customers. Some website saying it is illegal to use yellow tongue, some website saying it is compliant. I thought red tongue is for bathroom, you thought it is green tongue. 😂 so what is the correct answer?
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 5 ай бұрын
@@marktran5076 @user-mp4eg1mb9i Hi guys, the correct answer is water-resistant particle board talk to the manufacturers of those products to ensure you are making the correct selection. As for the general use, check specification 26 in NCC 2022 VOL 1 and Housing Provision section 10.2 for NCC 2022 VOL 2. Hope this helps and thanks for watching :)
@Will-nb8qk
@Will-nb8qk 5 ай бұрын
Actually on second thoughts it all seems like overkill. If waterproofing was done on surface and on inside of pipe, it is probably just as safe as using a flange but without all the rigmarole.
@Will-nb8qk
@Will-nb8qk 5 ай бұрын
Recessing those flanges in concrete or cement sheeting would a nightmare. The other query related to this is the floor may be flat or water does not actually fall towards drain especially on a wooden floor. In my mind the flange just needs to be placed on top of the screed and obviously recessed in. Bathroom failures in the past were mainly as a consequence of floor tiles being butted up against wall tiles.
@hemidesign
@hemidesign 5 ай бұрын
Just install the sheet membrane first (following the instructions from the manufacturer) and use the liquid waterproofing at the corners... 100% waterproof guaranteed
@rio20d
@rio20d 5 ай бұрын
just curious do volume builders (i.e Metricon, Clarendon, Brighton homes etc) use your service for installing the waterproofing membrane and waterstop? I live in QLD , and your videos have been so informative , thanks
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 5 ай бұрын
Hi Rio, thank you for your support and we're glad you're benefiting from our videos! We are solely a material supplier and do not provide any installation services! Really appreciate your comment and we're happy to hear you're finding it useful! :)
@AlexK-ew1mo
@AlexK-ew1mo 6 ай бұрын
What about underground foundation cracks? Liquid or sheet?
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 5 ай бұрын
Hi AlexK, the information provided in the video as far as performance of liquid vs' sheet is relevant to underground applications also! Hope this helps :) thanks for watching!
@ryanodea5417
@ryanodea5417 6 ай бұрын
Thanks for another great video. Which board do you prefer for a shower wall? I have mostly used Villaboard but i dont like how the manufacturer insists on using nails alone? Thanks 👍
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 5 ай бұрын
Hi Ryan, our preferences are approved wet area grade lining boards, tested to the relevant Australian standards. We recommend contacting James Hardy, as you will find they will have screw recommendations! Hope this helps and thanks for watching :)
@justpassingwind
@justpassingwind 6 ай бұрын
Piss off the music I want to listen to the bloke
@mariog3531
@mariog3531 6 ай бұрын
The description on video is good, but it would be even better to see how those premade shower bases are installed and waterproofed, having a hard time deciding what hot to waterproof it especially where the tile overlaps the shower base lip, becasue alot of times the silicon fails and water leaks in. Does you Tech department know how to advise about this if i call? thanks
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 5 ай бұрын
Hi Mario! This is a great question and thank you for your suggestion. Our tech department do have some additional recommendations, you can get in touch with us at [email protected] ! Thanks for watching :)
@user-eg7nh8su9x
@user-eg7nh8su9x 7 ай бұрын
What primer is best on concrete pad using with p39 membrane?
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 5 ай бұрын
Hi Eg, we recommend using E60 for this application! gripset.com//products/gripset-e60/ - thanks for watching! :)
@johannanthonis2042
@johannanthonis2042 7 ай бұрын
Any chance you can do a video of how to do the registration and insurance process to start a waterproofing business
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 5 ай бұрын
Hi Johanna, it's a great suggestion however this type of inquiry sits outside of our area as a manufacturer. Perhaps we can invite a guest speaker that specialises in this space. Thank you for your suggestion again and watching! Stay tuned :)
@clintonjarman5656
@clintonjarman5656 7 ай бұрын
Great discussion. FYI - your email address is bouncing back at the moment.
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 5 ай бұрын
Hi Clinton, for any inquiries please email [email protected]! Thanks for watching :)
@paulgellin9153
@paulgellin9153 7 ай бұрын
Would P39 be an alternative product to use instead of a solvent PU? Pu 39 sheet suggests no incompatibility (mainly for toppings) Anyway, would this work or what would you suggest? Cheers
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 7 ай бұрын
Hi Paul, the advantage of the P39 is that it can be tiled or screeded over directly for fully bonded systems, whereas solvent PU's cannot. P39 is certified and tested for internal and external wet area applications. Hope this helps! Thanks for watching :)
@CutieRingoJoy
@CutieRingoJoy 7 ай бұрын
I’m having a headache as my new scooter comes with a storage I can’t use it because it’s just a gate, rain will go in, I trying to find a way to cover it up with waterproof, breathable uv protection material because the battery door is below the storage so it has to be waterproof and breathable and uv protection from the sun
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 5 ай бұрын
Hi Ringo, could you please send the photo of what you are wanting to waterproof to [email protected] so one of our tech experts can take a look at it and make the correct recommendation! Thanks for watching :)
@filipitaamia9887
@filipitaamia9887 7 ай бұрын
Thanks for the video mate
@amie6324
@amie6324 7 ай бұрын
Hey i have full of pipe lines on my bathroom wall how can i cover it or what can i use to box it because its all over the wall
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 7 ай бұрын
Hi Amie, whilst this is not our field of expertise, consider studding it out and putting some gyprock over the top. Refer to the plasterboard manufacturer installations details. Thanks for watching :)
@amie6324
@amie6324 7 ай бұрын
Wow u really replied 🥹
@ryanphuong6025
@ryanphuong6025 7 ай бұрын
Thanks for the video! So if you if have a puddle flange installed, and the drain get blocked down further in the pipe, doesn’t that mean the space under the tile, even though is waterproofed, is going to fill up before it comes up the surface drain so you that you know there’s a blockage?
@GripsetIndustriesPTYLtd
@GripsetIndustriesPTYLtd 7 ай бұрын
Hi Ryan, the membrane terminates to the flange, so any water that comes up will be seen through the grate itself. Thanks for watching! :)
@saadalown1148
@saadalown1148 7 ай бұрын
يوجد طلاء بتيومين مائي يخفف بالماء ويوجد بتيومين زيتي يخفف بالمذيب العضوي
@shangyin4710
@shangyin4710 7 ай бұрын
Building my own house soon, thank you for sharing your video.