Dude you repeated yourself 5 times in 5 different ways 🤣

begg design?

Nice grind.

Nice collection. Close to $2000 dollars in knives. 😁 you went with expensive handles. I dare say you have the collectors bug. Got get out and use those beauties. I see you prefer thick blades. I have the Bravo 1.25 in 3V which is a slimmer stock. But it takes a beating but is a slicer. How is the ergoes on the BRK Sentry? I have recently purchased an Iron River in Magnacut & for a pocket knife the ergoes are ok. It fills 4 fingers comfortably. To put it in perspective, the White River M1 Caper has the best ergoes of any neck or pocket knives for which I set as the bar to meets. See ya in the backwoods.

Does the forward choil help or does it get in the way? that forward choil seems pointless. The handle is already large enough to accommodate a full hand and the handle has it's own choil. Might as well just have the blade edge go all the way up to the handle.

Wow such a thorough and thoughtful review. Really liked the way you explained your thoughts on these knives.

I really like the bark river sheath I carry mine every single day you just have to put the knife in the sheath and leave it there The leather will mold around the knife. It’s a little bulky at first, but it breaks in very nicely.

Hey, I really appreciate the video, and you had great points! just to adress the sheath design, I tried to design it as small as possible so it would be as easy to carry and get lost in the pocket as possible, so thats why I dont do a ramp on the spine. It is designed to be opened by putting the thumb on the plane where my logo is. That being said, I as a sole maker of this I must take in to consideration how users acctualy use the things I make, and your points are more then valid. Also I have some costumers who make aftermaket leather sheaths for these! I feel like most of the people have very bad experience with N690, as they encountered too soft, gummy, hard to sharpend (hard to remove the burr) and easily dulliung mass produced N690. I harden mine to 61-62HRC, and I love it, it stays sharp, its very stainless, irs easy to sharpen, that is all I want in a working knife. The Angis and the bigger knife (Varnas) both are available in N690 and Elmax for people who want high end steels.

It’s more of a feedback to me rather than review, but still much appreciated. I’m really surprised thou how calmly you describing this beast 😊 Have you sharpened it already? Would like to hear your thoughts on m390. Cheers

Yes, you SHOULD sell it to me immediately. Great idea!!! Lol

Wooow!!! God damn it, this Hinderer is incredible and unique!

This is such a descriptive review of winkler knives that most knife don’t reviewers understand. Thx for the meticulous explanation, especially explaining the way he grinds his blade before heating it. I have never understood this, hopefully I said this correctly. Thanks again!

I just bought one. Very nice knive.

Please sell me the Satori or Snafu. Rassenti is & always has been my favorite designer and I’ve never been able to get my hands on one lol. His original custom integral model blew me away years & years ago and is the entire reason I got into collecting.

Does anyone know who the OEM of the CKFs is?

Adamas is maybe benchmade's best product line imo. Choices are cruwear and magnacut at an optimal 63-65 hrc and it's somehow their least expensive despite being more knife.

Personally I don't think its worth it to get a S90v blade over the S30v. I have both steels in other knives, yes you will have to sharpen the s30v more often but its also a bit easier to sharpen too. I have this knife in the s30v also and do like the sheath too.Very nice review.

Amazing looking knife

I like your Spyderco collection. The PM 2 Tanto looks really nice.

Beautiful! A must have. Let the saving, and hunting, begin. This brand is a Unicorn in my country (Australia)

Another excellent video Marco.

I'd argue that a flat blade like that might make it possible to retain a knife in hand while drawing and firing a pistol. It's why I bought the MDV Plus One.

To my knowledge, creely keeps everything in state even the precision series. I love my mako

Good video explaining what and why you choose different steels. Personally I care way more about ht and blade geometry than I do about the steel, but steel comes in 3rd in the list. If I had to choose one steel for everything as my favorite, cruwear would be it. I have a edc fixed blade from Deep cuts cutlery in cruwear with a great ht at 65rc and for me it's just so good. Super thin, cuts amazing, though enough for my needs, good edge retention because of the ht, and plenty corrosion resistant for my uses. Also like that spyderco is using more cruwear too.

is it good for self defense?

Once Broken in medfords can be some of the finest , smoothest actions out there... Chris Reeve? no, but smooth absolutely.. they need to be handled and opened and closed quote a bit but my On Belays and Proxima's are like butter.

beautiful collection, a lot of great knives some of which i wish i had in mine for sure, thanks for the video btw if you have not tried the Medford Slim midi, also the m48 are great cutters and are not bad in hand, the slim midi is not very ergonomic but super slim and slicey

The fit and finish is my biggest complaint, at least between now and 2022.

All of those mods and you have a stock clip 😂

The sheaths focus on functionality. They are all AMBIDEXTROUS. If you're a lefty, you don't have to go out and by a new sheath for your brand new knife. Yes, it isn't as stylish, but the function is there for everyone.

Hey I know I’m two years late but… the reason he designs the sheath the way it is is so you can use the mini thumb ramp to break the knife out of the sheath with out ever putting your hand over it. Also it’s to hold onto while you use the tail end of your knife as a window breaker, while holding the sheathed end.

Ngl that’s the first time I’ve heard someone say to not hit the notification

my only knock on bark river knives

Supersteels arent necesarry for most working knives. They tend to chip much easier. Look at Esee and how they talk crap about their own S35VN knife lol. They didnt want to make it. Even 1095 will out last most of these "supersteels" in terms of toughness.

Ive carried mine in a tech bag, and any comfort complaints are resolved by function and durability. This knife has functioned outside the scope of a cutting tool and has been very handy

Do you still have that general? and if so is there any chance you would sell it?

I haven’t received a Bark river knife in some 8 years that didn’t come with a micro-bevel...Just Say’n

Excellent, thanks for a look into the world of knives.

What is the name of the dagger at the beginning of the video? Thanks for sharing.

Hi thx for your video ! Your Bk knives have just the perfect size , i have the bravo 1 rampless and he is amazing and so elegant !

How do i order 1 exactly?

Epic collection ❤

I love Winkler.

A lot of fun on that table.

Wow 😮! That's a fantastic selection there. All the best, David.

Knife doctor ☺

Cool bro

Nice knife

Wow

Plz next about best edc flashlight 2024 ,mini size just like olight batton 4