Vous êtes les bienvenus. je suis content que ma vidéo ait été utile !

Yes, that's what a turbo boost gauge does. It measures the pressure of the air going into the cylinders. But if you know a better place to put the sensor pick up then please enlighten me.

@@KeirBriscoe I'm not an expert, but it seems to me that the hose connection should be before the throttle. Regards.

@@gdariuszgdariusz4914 This is the correct area to locate it. Many people tap off the hose fitting that goes between the intake manifold and the PCV, but Ive heard horror stories of the plug screws getting sucked into the cylinders. Positioned where it is it shows vacuum when there is high engine RPM and a closed throttle. If the gauge does not indicate a low enough vacuum at idle it is an indication of an air leak somewhere along the path from the turbo. Cheers!

If I had access to a 3D printer I probably would have tried to print it myself as well.

I really don't know. I've changed the LCD on my X-T2 and it was similar, but not exact. For that one I also had to remove the back of the camera and replace the ribbon cable as well. They are all fairly similar. Try looking at iFixit and see if anyone has done a tutorial for your specific model.

Yeah, I've had that feeling before.

I built that myself out of wood and covered it in black suede. I never made a video about that project.

The only issue I have had is when I leave the wifi on the unit will occasionally freeze on startup. Its happened a handfull of times over the years, and a power reset fixes the issue. Xtrons was not able to provide a solution. But then their tech service is not the best.

Yeah, good point. Funny enough one of my projects is to replace the leather on my shift boot, so I just finished taking that all apart. There is a piece of plastic that snaps in place. At least on the stock one. not sure how the replacement aftermarket one is done.

If you can find the tape they yes. If I was able to find that kind of tape I would have used it instead of glue

I would agree its not great. I am a sound expert but there is a multi channel equalizer that comes preinstalled. I installed Poweramp as my music player and it has a lot more customizations available and I totally recommend using a 3rd party app. One thing that really annoyed me was the radio app is kind of ugly. Unfortunately Xtrons does not let you use a different radio app. My Motorola phone came with a much better radio app and I wish I could have used it on this device.

Im glad it helped. When I put the video up i hoped it would be useful to someone.

I believe it had an extra module you could purchase separately from the head unit.

Thanks!

Hello. I decided to take German language classes. My Burning man camp has friends who live in Paderborn so they suggested I stay here. I do have to take the train to Bielefeld for the class but it’s nice to have friends close by. I’m staying in the Riemekestraße area. This is a very pretty town with amazing history.

Thanks for your answer, nice to hear. I wish you a merry Christmas time!@@KeirBriscoe

Yes, the new screen looks and performs just like the original.

Thanks for the kind words. Good luck with the repair!

I'm glad you got it working. I also had a bit of trouble with. the ribbon cables. My eyesight is also not the best, but I do have patience and that comes in handy. Cheers!

Sorry no I don't. I used to own both the S and T versions of the X100, but I sold my X100T in 2019. I did replace the screen on my X-T2 back in 2020. For that I had to remove the entire back of the camera so I could replace the cable too. It required undoing a couple screws that were underneath the rubber grippy parts of the camera. Though I doubt the X100T would be the same. Good luck with it!

It's been awhile since I did that repair. Im sure I did measure it, but I don't remember what the resistance was. If it was out of the expected range I would have mentioned it in the video. And the actuator is still working properly.

Hi. 4.7k ohm. You can get these potentiometer for a few dollar as compared to crazy price for the actuator

Hi. Sorry for the late reply. I’ve just returned to the default world. I had to remove the glove box and that’s it. It can have differing amount of screws depending on how the car was built. Mine had Qty-9 eight mm screws. Then an electrical connector on the back.

Do a search for Audi A4 B7 shifter. There should be many options that come up. 12mm is the correct size for the B7.

Funny thing is I ordered the exact same one sir exact same car so your video is spot on for me. As you told that the knob might turn a little I’d add some silicone glue or something like that so it would stick on to place over night but would still be removable in the future

Yes, good point on the Cons. I'm also really happy with the pod I chose. A bit more work than other options due to the 3D printing. The benefits of buying the local economy gauge are: Supporting a local business, having it immediately (in Canada Amazon shipping is Sloooooooow), The rattle sound in the gauge is typical of mechanical gauges no not an issue with mine specifically. I totally agree with your opinion on hose clamps. The crimp clamps may be more work, but they look professional. I just checked out the Stewart gauges. They look great. Simple design, with no flashy logos or strobing colours.

Picked up single ear clips from harbor freight for $12.99 turns out I bought the tool about 30 years ago been sitting in my tool box ever since USED to remove and re use these oem clamps during repairs to save on time getting hose clamps which look amateurish. Same reason I solder connections and shrink wrap them instead of using wire connectors . professional job.

Sorry, no I don't.

Haha!. The left side red button is an air horn. The next one over is a custom button I had created that has an old school Cylon at the top and the bottom says "By your Command", which is what those guys always said. The center "Eject" button is the stock cigarette lighter with the Eject piece bought on Aliexpress. To the right of that is a 3.1 Amp USB charger that only energizes when the car is running. On the very right is an empty hole. but the piece that goes in the hole are USB connectors that go to the back of the head unit. So I can plug in a hard drive with movies, music etc.

It connects up to the stock wiring. The Center dash speaker splits between the front speakers so yes, this does use that speaker. Data is sent to the gauge cluster. So the radio stations are displayed there. I’ve not tried the CD player but I’m assuming track info would also be displayed. Also I was able to map all the buttons on the steering wheel to specific commands. The stock radio did not allow all buttons to have a function.

Yes it does

Thanks for the feedback, and for the view!

I'm not sure what adapter you are asking about. I built my own adapter that taps into the intake manifold. And I wired directly to the headlight switch.

I'm not sure how to respond. Is that a good thing? Did you love that car? I always liked the idea of the CRX, but I had an A ccord back then.

Stock boost is around 7-8 psi. My APR stage 1 tune gives me 15 psi so I would assume you have a tune of some sort applied to the ECU.

Hi Mikey. not sure what I can do to help. make sure the ribbon cable is inserted correctly and not damaged. I hope you tested this before using glue to reassemble it.

Congrats! Glad the video helped. I always feel great when I get things to work as they should.

I use cow hide on this.

@@KeirBriscoe I had to buy the pig hide because it was the only one that was available in charcoal gray. I hope it looks just as good as yours does 👌🏻

What’s available is good. I just went with what was the thinnest according to the store. I figured it would make it a bit more stretchy.

Thanks. I encourage you to try yourself. Be patient with the process and don't rush. Also the sticky tape they use is really sticky.

Glad I could help! I've also swapped out the LCD on an X-T2 though I never made a video on that one. The basics are all the same.

Yes it is. The Sony batteries are commonly used on a variety of video equipment like recorders, lights, as well as cameras.

Yes Steering wheel functions work out of the box. There was a setting that needs to be set with the Android Settings menu. But after that the buttons on the steering wheel can be programmed to many different functions. The steering wheel now has more functionality than it did stock. For instance by pressing the volume button I can mute the audio.

Wow, that’s nice. Thanks for the reply!

Hey Scott, thanks! I’ll be in the Chicago area in Nov if you want to meet up.

@@KeirBriscoe Cool, we can probably figure something out. I'm in the Rockford metro.

Thanks! I’m glad it is helpful for you.

Thanks for the feedback. I appreciate it! Have fun with the head unit.

Thanks, I try my best!

I don’t have a link. It’s possible they have moved onto a new model.

It’s funny how different manufacturers will call the gauge 52, or 50, 2.05 inches. In my experience they are all the same size. But to be certain reach out to the Ido3Dprints guy. He would know for sure. I put a piece of gorilla tape on my gauge to shim it into place. The gauge by itself was a wee bit loose.

I wrapped the rear ash tray and the shifter surround with the aluminum trim on. The rear ash tray was fine, but the shifter trim now fits very, very snug. As the sued is almost as thick as the aluminum I decided to remove the aluminum for the rest of the trim as it all needs to fit against the dash and the doors. Be aware the different trims are sized differently. For instance the Piano black trim is all one piece with nothing wrapping it. That means its slightly larger so that its the same size as the aluminum trim with the aluminum attached. I'm guessing the wood grain one will be the same as the piano black. Not sure how the Carbon Fiber one is assembled so I can't comment on that version.

@@KeirBriscoe thanks for very detailed information. Will order for sure very tempted