21 күн бұрын
2 ай бұрын
2 ай бұрын
4 ай бұрын
4 ай бұрын
Пікірлер
@afterpill 5 сағат бұрын
Can you create a 4 led Matrix style like porsche. I feel like that style would be good on this car.
@keloduma 9 сағат бұрын
My issue with HIDs is the wiring. This tech has been available for 15 years but no significant improvement in terms of wiring and packaging. And I hate how one has to drill the rear cap to thread the wires through. And
@Ivan-ij2gb 14 сағат бұрын
do u have some for the 1995 es300
@eudy261 Күн бұрын
i need one
@Everett3436 Күн бұрын
“Right now there’s no lens on” what?!?? What is the Lux with the lens on??
@LightwerkzGlobal 17 сағат бұрын
Expect a 10-15% reduction with the headlight lenses on.
@touchep1 Күн бұрын
How much
@kimsac1 Күн бұрын
Nice
@toyomade Күн бұрын
So in order to swap the assembly out you have to remove the entire bumper? And I read a comment about wiring and dealing with fuse panel components? I thought this would be pop the hood, undo a few screws, pull out the old, swap in the new, attach connector. That’s how I personally define a “plug n play” swap 😂
@apnagaon6498 2 күн бұрын
i have seen many Bi-LED with spot beam(AES FX3 or GTR) are better than Morimoto Bi-LEDs ,,, can you please compare in details
@K1dPhresh1 2 күн бұрын
Man, I’m going back and forth on these. Need to see them on a lighter car and in direct sunlight.
@user-sz2lo5of8e 2 күн бұрын
Do you loose the daytime running lights function of the car by switching to these bulbs kit?
@LightwerkzGlobal 2 күн бұрын
No functions are lost.
@555atU 2 күн бұрын
Are any of these headlamps direction adjustable? Im getting a lift and Im worried about blinding oncoming vehicles.
@LightwerkzGlobal 2 күн бұрын
Yes they are all fully adjustable. If you need a set reach out to us!
@diegogarcia9871 3 күн бұрын
Will it work on 2012? Plug n play?
@Fred-yx5dk 5 күн бұрын
What projector is that??
@LightwerkzGlobal 4 күн бұрын
Profile Bi-LED 2.0, a unit that is no longer available.
@alfonso6544 5 күн бұрын
What method of disassembly had to be used? How hard do you believe it would be to led projector retrofit this headlight be?
@LightwerkzGlobal 4 күн бұрын
This assembly can be opened in the oven with a traditional baking method. 240F for 20 mins at a time. It is perma-seal so it will require a few cycles to open and clean, but completely doable.
@ryandegraw1192 5 күн бұрын
That’s because this kit was for the hybrid model as well which is 400lbs heavier, you will want to use the top circlip on the top setting because the spring will be more compressed. The lower setting is for the non hybrid models. So when Toyota made that kit it would work for both drivetrains. It’s pretty simple when you think about it. That half inch of difference where the circlip goes is about an inch in height.
@Mo-ij8re 6 күн бұрын
you have a link for the headlight lens ?
@LightwerkzGlobal 5 күн бұрын
Do not have them listed but if you email us we have a set in stock that we can offer.
@lanniscannady4371 6 күн бұрын
Does the nhk comes with that male connector?
@LightwerkzGlobal 5 күн бұрын
We add them on for a small fee on the product listing.
@bryancenterfitt7127 6 күн бұрын
Where exactly are you getting your lenses from and can you order just the lenses?
@LightwerkzGlobal 6 күн бұрын
We source lenses directly from a top-tier supplier overseas. Currently out of stock but we have more coming in for the 992 in 2-3 weeks. lightwerkz.net/products/porsche-992-carrera-gt3-turbo-2020-headlight-replacement-lenses-individual
@bryancenterfitt7127 6 күн бұрын
@LightwerkzGlobal Are you able to get them for any make and model!? I have been looking for a good place to source lenses for my builds. It would make things a lot easier vs. buying new housings for each build. Considering that lightwerkz is who I normally go to for all of my lighting needs, that would definitely be one more reason to keep coming back! I am in the process of doing a custom build on a 05 Tahoe. Doing a dual projector build currently. I just recently got the profile hi-lens in, couple that with the morimoto M LED projector, I am expecting the build to come out nicely! I will say this, the M LED just does fit inside of the housing. It's going to be a lot of work to stuff that projector in correctly. Like with my last build, I am going to document the process. Since it's not a simple retrofit build, I think people would be interested in seeing how it's done. I plan on sending you guys some pictures of how everything turns out once I am done, just like I did with my 07 saab.
@LightwerkzGlobal 5 күн бұрын
@@bryancenterfitt7127 Not for any model. Mostly euro models but there are lenses for modern American, Japanese, and Korean models.
@dragon123443 7 күн бұрын
I recently got an 06 tsx and upgraded to clear lens and osram nb bulbs. I dont think theres any need for more light on the road. Im very happy with the headlights.
@NateGage-rr7zh 9 күн бұрын
Question: I've got a Platinum TRD Off Rd Pkg...Does changing to the TRD struts give that much better of an upgrade than the stock ones that come with the Platinum TRD Off Road Pkg? Wondering if it's worth the extra $$$$ to get those as opposed to pre load collar kit only which is around $450. I think it's another $550 for the TRD struts. Appreciate the video!
@LightwerkzGlobal 9 күн бұрын
Definitely worth it. You'll have a much better ride quality. Improved. If you just use the stock struts the ride quality is worse.
@NateGage-rr7zh 9 күн бұрын
Ok good to know. I’ll probably go ahead and order based off your video. The tough decision is to leave the spacer off or not. Hoping putting it on the lower setting and adding the spacer will give it a good look and ride.
@LightwerkzGlobal 7 күн бұрын
That should be a solid plan!
@markkemp7531 9 күн бұрын
What about he ar coated vs the non ar coated lens kelvin rating
@LightwerkzGlobal 7 күн бұрын
The AR coating makes the light output slightly warmer.
@markkemp7531 9 күн бұрын
Are these your projectors or Morimoto projector
@LightwerkzGlobal 7 күн бұрын
We use the Non Morimoto version in our conversions but could build with Morimoto is you prefer the AR coated version.
@markkemp7531 9 күн бұрын
Will it match led fog lights
@LightwerkzGlobal 7 күн бұрын
CBB is the closest match for LED fog lights
@jonmanilenio 11 күн бұрын
You didn't reference VOR/VOL
@LightwerkzGlobal 10 күн бұрын
Here is the updated video - kzfaq.info/get/bejne/eJuSicipqMy6YKc.html
@jonmanilenio 11 күн бұрын
i notice that you didn't mark the middle of the car, isn't that important? Also, how about adjusting the left and right for the focus?
@LightwerkzGlobal 10 күн бұрын
If you really want to dial in your horizontal alignment you can mark the wall for each headlight, then back up from the wall to 25' for adjusting left/right.
@McFadinbullhauler11 13 күн бұрын
I have the sl2 yellow 9005 in my high beams and I'm pretty disappointed. I knew I'd be getting a Lux drop going to yellow but it's drastic. But my biggest gripe is no matter how I rotate the bulb my passenger side bulb shines up in the trees.
@gatekeeper99924 7 күн бұрын
try taking it to a inspection shop and see it they can help
@McFadinbullhauler11 7 күн бұрын
@@gatekeeper99924 there's not much to do. I've rotated the bulb on the collar and it didn't change anything. Just the way the bulb reacts with my housings.
@simp-sons2354 13 күн бұрын
Fire 🔥
@patriotone755 14 күн бұрын
Next get the engine recall done.
@arthur_chung 14 күн бұрын
Headlights made the car look even dirtier 😭
@belvius 17 күн бұрын
Just curious did you adjust the height of the headlights using the top or bottom adjustment screws?
@LightwerkzGlobal 14 күн бұрын
Sorry dont recall but you will see which one adjusts the height once you start moving it. Just make sure to be 25'+ from the wall during adjustment.
@ericmead1115 18 күн бұрын
what year can interchange head light assembly?
@timhossfeld7260 18 күн бұрын
Hello. I'd like to do this, but just the bi-LED to replace the low-beam xenon. Did you have to do any trickery with the car's light module? I'm concerned how my 2001 E38 with factory Xenon will react to Morimoto LED 2.0. Will it barf and spew all sorts of error messages?
@LightwerkzGlobal 17 күн бұрын
Yes we can do just the bi-led and no extra trickery required. It will be plug and play.
@timhossfeld7260 17 күн бұрын
@@LightwerkzGlobal AWESOME! Sending you an email. Found your website and ready to order but have a couple more questions. Watched some other videos on this channel, you guys certainly are experts ! Glad I found you.
@Mo-ij8re 18 күн бұрын
out of these two, which is pure white ?
@LightwerkzGlobal 18 күн бұрын
Everyone has a different opinion on what "pure white" is. CBB is a cool white and the CBN is a neutral white. Here is a comparison photo between the two - facebook.com/photo?fbid=4614296501927163&set=pcb.4614296608593819
@Mo-ij8re 18 күн бұрын
which bulb is pure white ?
@Mo-ij8re 18 күн бұрын
so the cool blue boost is pure white ? or does it have a little blue in it.
@garydombrigue1235 19 күн бұрын
Do you offer a plug and play kit for 2019 Chevy Silverado 2500hd?
@LightwerkzGlobal 18 күн бұрын
We have the new NHK M5 Plus now. You can use this bracket setup - lightwerkz.net/collections/retrofit-brackets/products/14-chevy-silverado-hd-2500-d2s-5-0-g5-r-brackets + lightwerkz.net/collections/led-projectors/products/nhk-m5-plus-bi-led-projectors-lhd (just make sure to select the h11 /9005 pin add on setup) and it should be plug and play
@danielalviter2728 19 күн бұрын
Really good informative video
@Americanoutcast_ 20 күн бұрын
Are the Lexus RC 350 no longer available to purchase anymore? I don't see them on your site
@LightwerkzGlobal 18 күн бұрын
Email us, its built to order.
@MonkellD 20 күн бұрын
It says youtube cant open the link in the description!
@sufianabbadi1380 20 күн бұрын
Do you have them fpr sale?
@LightwerkzGlobal 20 күн бұрын
Built to order, please email us with any questions.
@leonardbrown5452 20 күн бұрын
Spoilt for choice 😮
@eazystreet5507 20 күн бұрын
Best camera work ever.
@LightwerkzGlobal 20 күн бұрын
Here is the updated version - kzfaq.info/get/bejne/eJuSicipqMy6YKc.html
@RobertoMartinez-yo5df 22 күн бұрын
Nice setup!!! Love the tint job. Wonder what % in the fronts
@LightwerkzGlobal 21 күн бұрын
20%
@markbielawski 24 күн бұрын
I put those Morimotos in my 2012 Mazda 3 a few years ago, and they have been amazing for what they are. This is definitely one of the best mods anyone with halogen projectors can do. I consider this a safety upgrade.
@Triggzism 25 күн бұрын
Another example of why LEDS will always be second to HIDs in my opinion. They are just better suited for this application not to mention that they have a higher longevity rate because it has been tried and true for many years as of with LEDS its just not there to me and with the option of just 6000 to 6500k that's a big deal breaker!! 4000 to 5000k is much more natural when comparing to natural sunlight and gives the best visibility hence the reason OEM HID was 4300k from Phillips and Osram that the manufacturers used for their vehicles. Certainly, if he can get an HID retrofit or new OEM housings then he will get better performance out of those HIDs with the proper aiming of course. Great videos brother!
@JoeyLovesTrains 24 күн бұрын
I’ve got Morimoto MLED 2.0’s and honestly they’ve been going pretty alright for the past 2 years. Hoping they don’t just quit on me. But they’ve been doing well so far.
@Triggzism 23 күн бұрын
@@JoeyLovesTrains Hopefully they will keep up brother. I had Auxito LEDS and they failed after one year of usage.
@JoeyLovesTrains 23 күн бұрын
@@Triggzism i had some cheap ones from Amazon and they also failed after less than a year. Don’t recall the brand
@jwherron 25 күн бұрын
I installed Lastfit Air H7 bulbs for my cornering lights on a F10 535iX LCI. Had to code out the flicker. Also, coded the FMU to recognize the bulb as LED. No error codes. The LED gradually brightens, much like the previous incandescent bulb. Noticeable improvement in coverage and brightness. I did observe that the color was a near match to my OSRAM CBB D1S bulbs. Happy with set-up.
@simpleautothings_official3549 25 күн бұрын
Met a guy years back with aftermarket HID that matched 100% with LED. White like paper! Never saw him again and never found a kit with that same true white colour.
@LightwerkzGlobal 24 күн бұрын
Likely CN Light HID bulbs. they were pretty close to that perfect ice white color.
@simpleautothings_official3549 24 күн бұрын
@@LightwerkzGlobal will look into it
@simpleautothings_official3549 25 күн бұрын
I thought Lasfit was good but they SUCK man.. I had the switchback and they failed after two years. The Lesson: If it doesn't say lifetime warranty like Sylvania Zevo bulbs they're gonna fail my guy!
@contagiousingenuityagency5273 25 күн бұрын
*or Diode Dynamics, or Morimoto, or GTR Lighting
@ReivinXL 25 күн бұрын
so is it safe to run HIDs on a halogen projector?
@LightwerkzGlobal 25 күн бұрын
Yes, It's safe. LED does run cooler overall though. LED would be "safer" in that aspect but there is a trade off.