Upkeep and a Jeep

Пікірлер

@brianmacinnes301 25 күн бұрын

Thanks for this! Worked out great!

@jaybenny7268 2 ай бұрын

Dude them are some badass rims. -Militant- where did you get them and how much??? Please let me know thanks

@Waveshank 2 ай бұрын

Black Rhino Armory Wheels. I don't remember how much. Depends on size.

@BeowulfHagen 2 ай бұрын

Just bought everything. I’ll report back on results.

@BeowulfHagen Ай бұрын

Finished. Worked perfectly. Used vertical bandsaw.

@timetrialist 2 ай бұрын

Termite buffet! 😂

@Waveshank 2 ай бұрын

Yes it was. I had to remove the panels. Not the best idea. Still looks good though even without the siding. Thanks for watching.

@viper8466 3 ай бұрын

Genius. Thanks for making this

@samprowell8946 4 ай бұрын

Where does the fucking hose go when you’re reinstalling a new one. I’m about to smash the fucking windshield I can’t fucking find the end of it

@Waveshank 4 ай бұрын

Hi. I never replaced the hoses. I just cleared them out and cut the nozzles off that get gummy and clogged. Sorry.

@kals1284 5 ай бұрын

can anyone do this for me in statesville NC for a 10k sft building

@michaelcass7929 5 ай бұрын

thanks mate this vid worked for me took me 5 minutes and i did not take that plastic off i only lifted and rubbed that hose till clean with a stick cheers and thanks

@skylars5658 5 ай бұрын

How much did the materials end up costing?

@joejoe5500 8 ай бұрын

How did you get the nipple back out from the opening? Mine went thru like you said.

@Waveshank 7 ай бұрын

I think I used a wire and needle nose pliers

@danieldextre56 8 ай бұрын

Good job!

@warrenmacek8445 8 ай бұрын

Great Job best video I have seen on alternator belt tension and idler pulley. I too keep old parts incase of an emergency. I found no other video for the tension pulley

@Waveshank 8 ай бұрын

Thank you for watching. Glad to be able to help others.

@janedoe6071 8 ай бұрын

I WANA DO THIS TO THE SHED !! I love this!!ive never done this before to a shed I have no idea what I’m doing ! Can I Killz it with a brush ?

@janedoe6071 8 ай бұрын

I’m trying to do something with my brothers old shed but I can’t get anyone to help me and they say 4get about it so now I’m determined to figure out how to make it look better

@jasona4881 8 ай бұрын

Could this cause a whistle sound during a cold start?

@Waveshank 8 ай бұрын

I doubt it. Listen with the hood open.

@codysimpson478 8 ай бұрын

Say it with respirator

@mikee2290 10 ай бұрын

Is it still holding up?

@Waveshank 10 ай бұрын

Sure is. Good as renewed.

@Sykora171 Жыл бұрын

Just did this, works great!!! thanks so much!

@Waveshank Жыл бұрын

You're welcome. Glad it helped!

@mattp7872 Жыл бұрын

How is the stabilizer holding up now?

@Waveshank Жыл бұрын

Still good as new

@stbam1965 Жыл бұрын

THAT FKING MUSIC IS TERRIBLE .WHY!! WHY PLAY THIS WHEN JUST SHOWING HOW TO FIX THE FKING SHED. ANNOYING

@DaveIsbell Жыл бұрын

Really great video! Thank you so much for taking the time to post it.

@Waveshank Жыл бұрын

Thank you for your appreciation and watching

@silasswaim Жыл бұрын

I purchased this stabilizer for my 2002 TJ Sport, but my drag link is threaded and won’t allow the pin to drop all the way through to the taper? Maybe I have a different drag link?

@Waveshank Жыл бұрын

Oh that's odd. Mine is a 2006 LJ. It was a tight fit actually. Looks like it's that same part for all TJs. Maybe contact Fox.

@silasswaim Жыл бұрын

@@Waveshank it was very odd but kept messing around with it and found that there was an aluminum threaded insert, probably from the first lift kit I had installed. Took the time to drill it out a bit and now it fits like a champ.

@gagirl0324 Жыл бұрын

Omg! Thank you so much for this video! I have been searching for a video on this repair. My seats will roll back and forth but they won’t rock forward. Can you let me know what those bushing and washer sizes were?

@JeepWranglerFreak Жыл бұрын

At the 10:56 minute mark, you can see all the bags required for this fix.

@Waveshank Жыл бұрын

@@JeepWranglerFreak thanks!

@hosscity7519 Жыл бұрын

What a stupid design

@justjosie8963 Жыл бұрын

Did you prime right on top of the rust or sand it down first? Edit: I see you applied that rust reformer. Is that it? No sanding necessary?

@Waveshank Жыл бұрын

I didn't have to sand because it was surface rust.

@DavidJohnson-wx6kt Жыл бұрын

had the same problem on my 2010 tdi wagon

@dmadison Жыл бұрын

This seems fairly straightforward and easy - however before attempting to tackle this, I must wonder - what is the intended purpose of that rubber tip you cut at the end of the drain line? Surely it doesn’t exist only to cause problems - so what good *should* it be doing? And, what potential problems might cutting it create? Thanks so much for your video and your time!

@kebruya Жыл бұрын

its suppose to be a filter to let only water out and not let spiders and other bugs into the tube and cabin

@hellbillyBob Жыл бұрын

Beautiful bro. Going to lowes tomorrow and fixing my seats !!!

@Waveshank Жыл бұрын

Still working perfect. I only had to reglue one of the rings once. No big deal.

@hellbillyBob Жыл бұрын

@@Waveshank bro seriously top notch improvised fix, not a band-aid a true fix. THANK YOU 04 TJ unlimited

@enriqueperez529 Жыл бұрын

Best video I saw on alternator replacement. The belt diagram was really helpful. Other videos I saw did not show an automatic belt tensioner which confused me alot .

@sylvanamarcello3892 Жыл бұрын

Nice!

@Queen_62 Жыл бұрын

My shed has little rusty nubs all over it, I rent and don’t want to put too much money into it but is an eyesore in the back yard. Any ideas?? All positive comments welcome.

@Oneklickmedia 9 ай бұрын

Sand or grind rust away, spray rust prevention primer and then spray or brush Rustoleum

@elizabethmorales9988 Жыл бұрын

I have a similar shed with rust on the walls. Do I proceed first with killz premium 3 or rust reformer like the roof?

@Waveshank Жыл бұрын

If there is surface rust then I would use the rust reform.

@elizabethmorales9988 Жыл бұрын

@@Waveshank ok thank you, should I do some light sanding first? It's my first project ever 🤦🏽‍♀️

@maorigirl5374 Жыл бұрын

Why 12x

@cheyneturbyfill4727 Жыл бұрын

Somebody out there is getting paid a 6 figure salary to engineer that crap.

@buzwa2k Жыл бұрын

Man, you made have just saved me! Thank you!

@realwonJr916 Жыл бұрын

Thank u

@nascarstinks Жыл бұрын

What brand of radiator do you have in this video? Looks after market.

@Waveshank Жыл бұрын

Mishimoto. Aluminum and lifetime warranty.

@papajoeknows8355 Жыл бұрын

Another quick question… rather than enduring cold water while waiting for the warm water to fill the line, can you switch it to “nozzle clean” and get the warm water going before use?

@Waveshank Жыл бұрын

I believe so, if you have the other valve on hot as you let it run. My sink is close so I can turn that on hot and let it run too.

@papajoeknows8355 Жыл бұрын

Does it alter the pitch of the toilet seat, because it’s raised a bit in the back?

@Waveshank Жыл бұрын

A little bit, but it's not really noticeable. It doesn't make you feel like you are sliding forward or anything like that.

@papajoeknows8355 Жыл бұрын

@@Waveshank cool thanks. I ordered one and it was delivered today so installing tomorrow. Thanks for your video and response. 👍🏻👍🏻

@Waveshank Жыл бұрын

One of the hot water O-rings is tricky. It took me couple of times. Don't over tighten or it will unseat and leak.

@papajoeknows8355 Жыл бұрын

@@Waveshank yes, I took notice when you mentioned it in the vid. Thanks.

@rickbat6201 Жыл бұрын

Sorry but you didn't show how you got the paint sprayer going or what the issues where. NO real tips here.

@claritzaavilesbaez5709 Жыл бұрын

Was the small bottle of reformer enough? I am doing it this weekend.

@Waveshank Жыл бұрын

That's all I used for the roof.

@bodyakot Жыл бұрын

Thanks a lot for this video

@anthonya8939 Жыл бұрын

great video! this helped me out a lot appreciate it!

@inkstain7193 Жыл бұрын

Use a rusty metal primer.

@anthonyg4073 Жыл бұрын

My right ear appreciate you.

@dnharperable Жыл бұрын

I have an '08 Rabbit/Golf with a similar issue. Are these built the same way here? Would this solution work on this car?

@Waveshank Жыл бұрын

I am not sure. You would have to find out where the drain lines are in your model.

@icecreamsikeyuhasz5689 Жыл бұрын

Thanks! Looks easy enough. Getting an odd squeal at startup but its very intermittent & mostly in cold temperatures. Always goes away after a few minutes. 02' TJ, 125k miles

@Waveshank Жыл бұрын

Thanks for watching. Try changing the belt first. Clean all the pulleys with degreaser too. You can test the pulleys for play/noise with the belt off as well.

@seahorse251 Жыл бұрын

Was your roof leaking before you painted it? I think my shed leaks so I wonder if its worth doing this.

@Waveshank Жыл бұрын

It was not leaking before.

@petyo22 Жыл бұрын

Hello. Do you have experience with a missing (dislocated) drain pipe on the driver side in the front of the car. Its not coming out of the body of car, but I can feel it if I stick my finger to the hole (please dont get me wrong :D ). Thats why all the water from the roof is getting to the cabin underneath the carpet by the pedals. Thx for the coments.

@Waveshank Жыл бұрын

Oh no that's the worst case scenario. I think you would need a special set of long needle nose pliers. Maybe you could use wires or coat hangers to moved the hoses around to get them to reattach.

@dad3562 Жыл бұрын

Question, when I turn my AC off I start to get a squeal all the time. But it’s very quiet though and only when the engines hot. When I turn the AC on it’s only when I rev it up. I’ve replaced fan clutch, water pump, and probably next both the idles and tension arm. Once that’s done I’m praying it’s not the throw out bearing.

@Waveshank Жыл бұрын

It could also be part of the compressor assembly like the clutch in the compressor pulley. The clutch could be expanding when hot. Idk Does the center part stop completely when ac it off? If it was the TOB it would mostly likely alway make a sound no matter what was on or off. The other pulleys are relatively cheap and easy to do and should be replaced eventually anyways.

@dad3562 Жыл бұрын

@@Waveshank oh shoot I can totally check that out! Thank you for the advice

@dad3562 Жыл бұрын

@@Waveshank it does it with the AC on as well but not as loud.

@Waveshank Жыл бұрын

@@dad3562 then it might one of the other pulleys

@Waveshank Жыл бұрын

@@dad3562 when it has less tension when the ac isn't engaged it makes more noise

Ең жақсы KZfaq

Пікірлер