Wow. The one you done the mods on is a way different saw, beauty 👍🏼

She's sounds pretty good now after the mods, nice and snappy too Wish you could have made a video on you doing the mods Would love to learn how to do it man

I’m wondering if the newer 62cc models have the same issue. Looked at buying one this week, then on review website saw they’re discontinued…

Mike Nolan's chainsaw reviews

I've got a first gen SX76, bought from AGR machinery (just Edisons with one of their MANY scam names that they have buried over the years). Had it for for a very long time, back before everyone knew what a pile of excrement Simon Mills is and his dangerous imported Chinese equipment that kills people. Ironically, I actually love the saw, more reliable and easier to start than my Stihl or my Husky, but out of the box, it never oiled, the plastic worm gear strips the teeth on the first pull, they sent me another one, same issue. one day I might try and match up an alloy worm gear from another saw that will fit, I am shocked how long they have been using the current name Edisons, and that they never dropped the baumr-ag brand. They don't even care, and that's why their equipment kills people, chainsaws are one of the "safest" things they sell... and they DO NOT meet the Australian safety standards. Incredible that the government allows this crap to happen for over a decade. Some of their hydraulic stuff, and tractor implements etc... are absolute suicide machines :(

I purchased one and had it thoroughly tested and turns out its a 92cc which would explain the weight. One web site advertises as a 72cc but thts before the upgrade fix

I bought an SX62 8 years ago and it still starts and runs fine . I was so impressed I bought another two 7 and 6 years ago . All 3 are still going fine . All 3 run a 20 inch bar and I cut around 40 tons of firewood a year including iron bark , red gum , stringy bark etc.. The reason I use 3 is if one goes blunt I just change saws . The only problem I have is they are impossible to start when hot after refueling and need to sit 1/2 hour to cool down .

Hey Anthony, thank you for the video comparing stock vs big bore, can you tell me where can I get the Big Bore kit for my SX82? I’m in Brisbane mate 👍

Would anyone know if the side chain cover would be swappable sx75 with the 62cc models ?

I am currently using this saw and i think it rips for the price. Ive busted the stock bar twice now though so im wondering if you had any idea what bars are compatible with this saw?

I've got one and it cuts like the chain is blunt. Terrible. I'm wondering if the bar oiler is faulty. It's not really even worth the low price.

So basically it's a Husky 372 copy. I think the sx82 is the same but I would have to check the cc's

Hey Anthony! you measured the diameter of the piston, NOT the "cylinder diameter"/bore. And I can tell you now bro, that the piston has substantially less diameter than the bore. Your displacement measurement is spurious... No wonder the seller has ignored you. Also mate, I dont know what website you bought your SX75 from, but the website I bought mine from clearly advertises the displacement at 62cc. Just because a Falcon 500 is called a Falcon 500 does not mean it has a 500 cubic inch engine LOL

Chinese chainsaws are junk it's better to shell out a few coins for a German made model. I've had too many problems with Chinese made chainsaws including the bar which always seems to work loose the chains themselves which are pure junk, leaking bar oil and problematic carbys not to mention cheap plastic parts that break.. China couldn't even manufacture ball point pens until 2017, they simply couldn't engineer them

do you think its possible that the seller didn't know the CC was incorrect?

I call b.s,maybe the cc mnot be 75cc,but I can tell you that this thing when tuned rips through ironbark,blur gum and a stack of other Aussie hard wood,absolutely bargain,I do have my stihl 381 magnum as back up,so far so good,I have had the main fuel line fatigue and suck.air.

this shit not even with a 14 inch bar can with a bar of 22 it's slow, you can sleep the smaller the bar, the faster it cuts

I bought the SX72 which is advertised as 58cc, it cuts well with plenty of power, much more than my 52cc oleo mac.

<<USA, Nice Saw I See!!! And its ported, wow!!! Liked#2 and subscribed!!!

they update the specs on their website now, for SX92 now it says 72CC. thanks.

saw looks and sounds like its running like a scaleded dog but that chain needs some love!!

I've got one...three years now...every winter I spend a a few weeks cutting the second hardest wood in the world...Gidgee wood...put a good bar on it, a full chisel chain, put a rubber washer around the air intake as usually the air filters do not seal correctly and use Putoline TT Trial Pro two stroke oil and mix at 40-1...I mix 1 litre a time and use a 20ml syringe to ensure I get exactly 25ml of oil per litre...So I have probably used mine for over 100 hours cutting the second hardest wood in the world and three years later...no problems....they're good money....a good tool.

Hey man, have you been able to find where to get parts for these from maybe something like AliExpress or Alibaba? Hope all is going well mate!

That dual muffler has spark arrestor inside??

58cc or 62cc?

Hi Anthony, I have watched all your videos and I was wondering if I could get your opinion - I am about to buy an SX82 because as you've pointed out they are identical to the SX92 but slightly cheaper - do you agree? Also, what are your thoughts on using one of these saws with an alaskan mill?

Minus a bit of tuning(could be how it comes through the camera mic) they sound like they run damn good for that they are honestly. I wish I could get that brand here in the states.

One's now 76cc the other still around 70cc. I measured the bore and stroke the sx82 had a 50mm piston and I put the 52mm top end on so I assumed the 92s already had the big bore kit so if not there's no difference but a sticker until you rebuild it.

Yes. I got conned by this company. I have the 92.

Hi Anthony, thanks for the review. Any recommendations on a budget saw for a home owner? Just for firewood collection. I have a Jonsered 2040 Turbo which is a bit undersized sometimes. Looking for a bigger bar/motor but it won't see heavy use. Neighbour has the SX62's and swears by them despite them failing every 2-3 years because they are so affordable to replace. I was looking at the 75 as well.

Saw looks really blunt in that wood cutting lart

Thanks mate

You forgot the rest of the space above the piston "mate".

Great job. Would you mind put some details of the mods pls

Hi invite to a friendly competition from down under Australia, Chinese chainsaw underdog competition part 1 rules cheers kevin

.....apparently in the motorised bike columns it's been mentioned that the Chinese look at the full capacity of the piston chamber which includes the unswept combustion chamber not just the displaced capacity . ..Mine is an sx72 brand new which I purchased exactly ten years ago. I couldn't start it then and not doing much better today .It'll only run with choke engaged with help of the starter fluid .Soon as I disengage choke it cuts out. Naturally something isn't right with the carby. Since it's useless as is , I guess I'll pull it apart . I'm ignorant about those types of carburetors .

In this day and age this should not be going on. False advertising has been a no no in this country for decades. I think the authorities have taken their eye off the ball regarding this in recent times and need to crack down on manufacturers and importers telling bullshit about their products and Australian retailers perpetuating that bullshit so they can cash in on the manufacturers lies. Good work on highlighting this problem.

be nice to see a new sx62 what it is

is the sx 62 a 62cc?

Great work mate I just shared this video link on the comment section of my unboxing video. I noticed that they advertise these now as 72cc

I like your review sx75 is not cracked to what the saw is , I BOUGHT A X BULL SAW 75 cc or is it might be the same as the sx75 , I still waiting for my saw to arrive ORDED a month ago iff dose not arrive I get my money back .

I got an older SX92 and I don't know whether I would have preferred the old big banger 92cc SX92 or the newer 71cc SX92. The newer looks to be an absolute dream in comparison to the old style. It has an angled cylinder, fuel tank where the air filter is, awful air filter, a few extra kg of ballast and is awful to get into the air cleaner of. Despite being pretty godawful you can still get the same chainsaw as a Giantz 92cc from Hardly Normal or Amazon.

Good on you for bringing this crud to light, and I hope the authorities do something about this

what's the price you paid for it mate im over in United kingdom second hand 372xp is £400 Is that saw anygood

Hey mate on the actual specs on there website it states it’s a 72cc saw not sure what tje sx92 is all about

Hi Anthony. I have a SX92 and it leaks bar oil profusely. I wrote to Edisons and they said it's working as designed and to store it with the bar facing up. Have you had this problem? Great Video thanks for posting.

lixo motosserras com o preço desses dois compravas um husqvarna 372xp

Warning!! chainsaws are extremely dangerous and all correct PPE should be worn when operating. Yes I am aware that in this video I am not wearing all correct PPE. I must get myself some.

Came to learn about the quality of these chainsaws, ended up getting a maths lesson. Keep up the good work : ) Cheers