EmpireOfSand

Пікірлер

@TannerKonrad-t3j 8 күн бұрын

Appreciate you making a video. I was wondering how you got the parking brake cable out of tractor?

@3Gbroyota Ай бұрын

Bedside repair where they just overlayed another bedside?

@protovault3931 3 ай бұрын

What kind of motor is in this? I'm about to buy one with a broken motor

@RajunCajun1 7 ай бұрын

Does it seem to stay warmer inside because of putting the foam around it?

@Jmastffp 7 ай бұрын

I’m down around the Bloomington/French Lick area. Thinking of doing the same thing. We’re also living in a 5th wheel until we get our barn built. Glad to see my crazy idea might work. How did it turn out for you?

@beetooex 7 ай бұрын

I'm planning on building a wall of straw bales around a caravan it's an excellent insulator and pretty cheap. If you can keep it dry you can sell it on later for it's original purpose. A skin of pallet wrap would do that if you can't park under a barn.

@kevinsmeltzer8053 8 ай бұрын

Do you still have your LS tractor? I recently found a used model on Facebook marketplace and started researching and found your videos. I'm located in Indiana and the tractor is the same as yours and from Richards! Talk about finding a gold mine for researching! Would you recommend your model tractor? Thanks for taking the time to make the video a few years back. May save my day if you don't recommend.

@kbutt5471 8 ай бұрын

Was it worth it? I'm debating getting a 5100e open so I can tow it with the 3.0l duramax suburban and the lower weight would work.

@ajhobert 10 ай бұрын

Too bad we had to listen to your gum smacking

@gregnemecek3968 11 ай бұрын

Thanks so much for this video! This is EXACTLY what I am experiencing with our LS. Great tractor but the steering has been an issue since the day it was delivered. So thanks again. I'll be buying some larger cylinders for our machine. In fact I'm going to see if the machine is still under warranty and if so THAT's where I'm headed first!

@kmisercola7180 11 ай бұрын

I just purchased a Montana that was made by LS. Those brackets on the side should be for front signal, flashers

@organicvids Жыл бұрын

On b21 you have to use a tie down to keep pedal engaged forward and use a dremel to cut frame to widen the hole to access the detent bearing OR you have to drop hyd oil pan and access from underneath.

@perry9492 Жыл бұрын

So if that return spring is broken, how do you fix that without tearing the hole tractor apart?

@jml255 11 ай бұрын

I have the same question

@dannyboy6332 Жыл бұрын

Whatever happened to this tractor? Did you finally get it fixed or did you trade it or sell it?

@Couch_engineer Жыл бұрын

Thanks for making this video. Helped me. What’s that big handle?

@MickeyC3040 Жыл бұрын

Looking pretty good! I bet the engine bay is real tight

@SunriseCrawlers Жыл бұрын

How did you find the center pen kit ? I have a m475 and need to change both the horizontal one and vertical one

@Lupusharv Жыл бұрын

If I remember correctly Vermeer Midwest on Google is the place I bought most parts

@SunriseCrawlers Жыл бұрын

@EmpireOfSand hmm ok. I'm working with a local place to try and get a repair manual but they can't find my machine since it's so old it has no Vin

@Lupusharv Жыл бұрын

I'm not sure but I think Midwest Vermeer sent me a manual for just giving them the model #. The M- series is basically all the same

@Lupusharv Жыл бұрын

Yea went to vermeer.com and it says in parts if you register your used equipment they will give you a free manual

@Lupusharv Жыл бұрын

Even ebay has manual for the old stuff

@shopdoc Жыл бұрын

Looks fantastic! Great job! Keep it up!

@joetterolison4093 Жыл бұрын

Hello I have the exact same golf cart top and I am still trying to figure out my final plan I can't get into the garage with the ROPS up so I can only go maximum 81" tall before I hit the opening AGAIN Forgot to drop it one time

@toadfrog240 2 жыл бұрын

I haven't seen the safety switch you are talking about but the actual switch you have in your hand looks like it should be the safety on the clutch pedal.

@carlstepp3276 2 жыл бұрын

Hi....I have lupus was wondering how you are doing with your lupus?

@Lupusharv 2 жыл бұрын

Carl I can tell you this, one of two things... Either I'm in remission and have been for several years or secondly I found out my testosterone level was very under 100. So after I started testosterone therapy my "lupus" we're almost non-existent. My doctor believes it was the low testosterone causing everything. Remember lupus is " the great pretender" and diagnosis is not a black and white thing. All I know is I am happy to feel better and have way less joint pain.

@scottjaecques7409 2 жыл бұрын

I had a case 1000 terra track drive and it had the same engine as the Massey super 55 401 4 cyl diesel and they were a POS engine

@stevenmundial1 2 жыл бұрын

Not sure if you will get this but did you compact the sand? IE. Tamp

@carlstepp3276 2 жыл бұрын

Wondering how you are doing with your lupus

@Lupusharv 2 жыл бұрын

After starting testosterone I have minimal to no lupus symptoms, I have had two doctors disagree with my lupus diagnosis, so I'm really not sure if the extremely low testosterone was causing most of my issues.

@mondavou9408 2 жыл бұрын

The real owner of the RV shows up at the end. :-O ;-) :-)

@Loop307 3 жыл бұрын

Diesel mechanic here you got a bad injector thanks you’re welcome have a nice day

@Lupusharv 3 жыл бұрын

You hit the nail on the head over the Internet, it only took two dealerships 15days to figure it out.

@brents927 3 жыл бұрын

Water in fuel?

@el.don1975 3 жыл бұрын

Its brilliant, I cant believe how little info there is on brick flooring. I want to do this for a cabin.

@derrickstobie1209 3 жыл бұрын

Do you still have the original bell housing

@Lupusharv 3 жыл бұрын

Yes I do.

@nervousordo 3 жыл бұрын

Looking back on it all do you wish you would have spent the extra money on the Kubota? LS scared me just because of the potential parts supply. I don't use my tractor a lot (50 hrs/ yr) but I want to feel confident that it will work when needed.

@ericlakota6512 3 жыл бұрын

Used parts on line are scetchy and its bs how much eveyone wants for old used parts that only hand full of people will ever need it. Old case engins used rusty blocks going for almost 1000 wtf or your fly wheel id feel horable seling it. Id feel like pos inless i sead needs rebuild.

@ericlakota6512 3 жыл бұрын

I need motor saying 148 dont scrap those blocks please harder and harder to find

@ericlakota6512 3 жыл бұрын

Wow i need a block i have every thing else except oil pan my motor has ben apart for to long and the omont of rust i dont tink i can rebuild mine it has scale coming off

@chinacreek1 3 жыл бұрын

Pretty sweet you could save alot of headache with the trans and clutch and just run a high torque hydraulic motor straight to the trans just run the entire thing from the hydraulic pump. I did this with an old Cat 10 sold it years ago but i just used a 12 hp kohler a free hydraulic pump from the scrap yard and a $300 high torque motor with a simple double action valve from an old wood splitter forward and reverse in every gear.

@johndorazio3759 2 жыл бұрын

Good idea

@outlawco60 3 жыл бұрын

I was wondering how are u doing with your lupus? Well i hope

@scottsmith7080 3 жыл бұрын

How did you figure out the bucket and cylinder geometry?

@deangulberry1876 3 жыл бұрын

Is it holding up 3 yrs later? Looks 👍

@Lupusharv 3 жыл бұрын

The only real issue I have had is when I forget to lift my tiller on my tractor before I back out or the barn knock some bricks out

@shopdoc 3 жыл бұрын

Dang that is a seriously huge project! Lots of fabrication! Keep it up.

@wildcatwilly 3 жыл бұрын

Awesome video!

@jondaniel540 3 жыл бұрын

I sympathise with you my friend. I will pass on your message. I was wondering, who buys your bales? Pet shops? Rabbit breeders? Or just for decoration?

@Lupusharv 3 жыл бұрын

Women love to decorate with them!

@jondaniel540 3 жыл бұрын

Those are nice tight bales. Well done 👍

@wildcatwilly 3 жыл бұрын

Also need parts if you have some available

@wildcatwilly 3 жыл бұрын

I'm redoing a similar Dozer on my channel look forward to seeing what's next!

@olddave4833 3 жыл бұрын

I had two of them back in the early 70s had one and bought the other for parts and ended up running them both pulling out fire wood and some logs. they were tough, I think they rusted out from setting so much when I stopped using them

@shopdoc 3 жыл бұрын

Very cool project!! Lots of work ahead. Keep us posted.

@shopdoc 3 жыл бұрын

Very interesting! Thanks for the detail. I hope my new L3560 doesn't have any issues. Catching up on some of your older vids.

@dackbowland1876 3 жыл бұрын

In my 2.5 car garage, I lined the roof with grocery bags full of empty water bottles, then covered it all with old blankets, some actual insulation rolls, and some cardboard. Does really well tbh

@shopdoc 3 жыл бұрын

Good grief! She just kept grabbing them! I thought for a minute she's gonna empty the trailer....unbelievable!

@timothyrobinson894 3 жыл бұрын

That’s a great idea. Sure it’s going to be one of a kind when finished.

@ThunderChicken1 3 жыл бұрын

Love the beams.

@larryalexander4833 3 жыл бұрын

Wish I had the same option . Can't afford concrete looking at gravel for now

Ең жақсы KZfaq

Пікірлер