Пікірлер
@allanlugo8095 18 сағат бұрын
LOL nice hat
@ManyThingsSeem 3 күн бұрын
That's what mine needed too... for me to snort the fuel...
@samuelmorado70 3 күн бұрын
Bug sprayer
@donl3381 3 күн бұрын
Great video. I need help. Pull start cord rips out of my hand when i attempt to pull / start it. Does anyone know why and the fix? Its been a year and I'm still at a dead end. Seems like my timing is always going out of line everytime i re align and start it again. Just shuts off after a few seconds of running and timing is off again. Ryobi GCV 190 3100psi 2.5 GPM
@pattayperformance 3 күн бұрын
Start easy… Check timing via the keyway on the fly wheel and if that is still good check and adjust valve lash You can also pull the pump off the motor and check to see if the problem still persists and if it doesn’t you know your pump is the issue
@GCtwoTHREE 4 күн бұрын
Bro, u sure I should do this.....I'm hoping it goes smoother for me
@pattayperformance 4 күн бұрын
Yes please do it! Don’t let my video deter you from the repair. I don’t edit my mistakes/frustrations bc I don’t want you to make the same ones OR if we have the same thoughts we are human and will succeed! You got this and I’m here if you need help! I PROMISE
@wespetit150 5 күн бұрын
hahahahaha, ur so mad @ honda u forgot the existence of Straps. lol. i can feel u bro. i realy am. cheers
@luismanuelmendoza789 5 күн бұрын
thanks man!
@sentryfe74 6 күн бұрын
The wax cartridge appears to be removed from the block, the square shape opening above the intake port. That is what opens the choke when it warms up.
@berre129 6 күн бұрын
Great video, thanks for taking the time to make it. I've been looking for this part, but cannot find it. Any ideas. Thanks
@stephendudley1406 6 күн бұрын
Thank you!! Heating the rope and making a point was the key to getting my rope in. I was having a heck of a time before, wrestling with this solid Kohler starting wheel (if that's the real name of the part).
@mrcharlievarrick116 6 күн бұрын
re-engineering Is Fun !!
@dingo6785 6 күн бұрын
Where did you buy the carb and what did it cost? Thx.
@Turningwrenches85 7 күн бұрын
Nice work jason 🤙
@TheBruningee 7 күн бұрын
i have the same style Toro (2019) and my brake cord just broke yesterday (dont leave it out in the rain for 3 years), i used old electical wires to jerryrig something until i get the right wire, i came here from the Ebay listing bought it. :)
@pattayperformance 7 күн бұрын
Thank you so much Scott! Your cable should arrive tomorrow! 🫡
@JoeMartin_0121 7 күн бұрын
Put some hair on those holes brotha 🤣🤣🤣🤣
@TheFishinAddict 7 күн бұрын
What is the torque on those 2 bolts holding the air filter housing on? I am getting a leak below that. Appears to be leaking from that seal between carb and filter.
@don2deliver 8 күн бұрын
The only advantage to individually adjustable wheels is you can tilt the mower to angle cut the edge of a lawn. With a good edge job on the lawn, this means you may be able to skip trimming.
@georgiaweyant4486 9 күн бұрын
Thank you for this video! This is my second time taking apart a mower carburetor to clean, your video was very thorough and I got to brag to my bf that I could fix it, he said it was something else but I knew it was the carburetor
@richardaquino1640 10 күн бұрын
Thanks for the tip however I called the dealer and asked about this he sounded skeptical and I was wondering because the machines belts , pulleys, bearings where designed to handle snow according to factory specifications has anyone had a problem with anything wearing out after installing this kit.
@pattayperformance 10 күн бұрын
Zero issues bc remeber you are breaking In the paddles to adhere to your housing. Always recommended before blowing snow to coat everything with lube
@user-wt1xj7qr9m 11 күн бұрын
I have the same pressure washer and this video saved me $400! Thanks
@pattayperformance 11 күн бұрын
Great job! Dont forget to change the oil
@Turningwrenches85 12 күн бұрын
Hank Williams Sr said I saw the light he was right very bright
@user-qy8ed6yh8b 12 күн бұрын
Gone with the Trump hat.
@pattayperformance 12 күн бұрын
This isn’t an airport…no need to announce your departure. Hate has no place on my channel! 🫡
@user-qy8ed6yh8b 11 күн бұрын
@@pattayperformance Hate is what Trumpers are.
@PainterD54 13 күн бұрын
I've never had to replace those bolts on mine. You must be trying to throw rocks with that blower! You need to install an impeller kit - then you will have a real snowblower!
@fred3370 14 күн бұрын
I bout one for $200 felt like low power and also runs out looked like a new carb got put on i felt like a got ripped out since my hand echo blower has more balls then the backpack but ima try this out tomorrow
@Hollywood49 16 күн бұрын
So you changed the carb as well?
@pattayperformance 16 күн бұрын
This will work with the factory carb. On this particular motor/mower.
@LLC3 16 күн бұрын
Toro sucks.Mine will start and run for a little while but then that sucker won’t start no matter what I do. I will not ever, never will I ever buy another Toro???!!!!!!
@pattayperformance 16 күн бұрын
FYI.. Toro makes the motor…Briggs makes the engine. The mower will run for a little while…when it dies. What have you done to try and get it started?
@juliannaforgione8570 16 күн бұрын
thank you the best video on the tube you saved my marriage
@karenbearden6198 17 күн бұрын
Ha ha that screaming goat, I'm awake now. Nice video this is the same one we have, it's been sitting in the shed for a few years. I've been meaning to try and fix it, thanks. :)
@justinkistler325 17 күн бұрын
Awesome video thank you, i just was offered one for free.
@mgomez5606 19 күн бұрын
Jason, how many clamps come in package? If I was still working zip could get them at work. Look like clamps for tubing.
@pattayperformance 19 күн бұрын
No clamps come in the package…just the cable
@mgomez5606 19 күн бұрын
@@pattayperformance I was referring to the clamps Jason. How many are in the package?
@pattayperformance 19 күн бұрын
@@mgomez5606 if I understand what you are trying to say. When you order the cable from Honda/Parts Place You Choose it comes with no clamps or hardware.
@mgomez5606 19 күн бұрын
@pattayperformance when you ordered the clamps, how many came in package you ordered. You said it was quite a few.
@pattayperformance 19 күн бұрын
@@mgomez5606 ohhh the cushion clips! I had to watch my own video 🤣🤣🤣. I got them in a 20 pack amzn.to/3KG0Crl
@mgomez5606 19 күн бұрын
Jason, what did you do about the engine stop cable.
@pattayperformance 19 күн бұрын
Great question and sorry I wasn’t clear in the video. You still need to keep the bail cable as you need to stop/kill spark on the motor to shut it down.
@danielschomburg2140 19 күн бұрын
Hey thanks for the video! I am gonna clean my carb this weekend this will be helpful!
@jascam1 21 күн бұрын
Did you remove the Therma Wax device from the engine block that engage the choke automatically, if not it's going to still engage/disengage when the engine operates.
@pattayperformance 21 күн бұрын
I left it bc it wasn’t working in the first place. Play safe and just remove it
@Turningwrenches85 21 күн бұрын
Always got to polish the shaft 😊
@JermKubanek 21 күн бұрын
We have same mower cleaned carb still won't start, any thoughts?
@pattayperformance 21 күн бұрын
What diagnostic steps have you taken and what were the results?
@JermKubanek 20 күн бұрын
@pattayperformance we tested the spark plug and wire all was good and changed the oil as well as new air filter, it started and ran great before but stopped suddenly so we cleaned the carb then it stopped working, just ordered new carb but idk
@pattayperformance 20 күн бұрын
@@JermKubanek when you hit it starting fluid what happens?
@JermKubanek 20 күн бұрын
We haven't done that, any other thoughts? He doesn't want it to blow up so wants to avoid that option
@pattayperformance 20 күн бұрын
@@JermKubanek starting fluid won’t blow it up. If he insists…put gas in a spray bottle and use that. Please report back
@JermKubanek 21 күн бұрын
We have same mower cleaned carb still won't start, any thoughts?
@JermKubanek 21 күн бұрын
Hey we hav
@mrbard1 21 күн бұрын
I tried starting my dad's up, he said that he got it from someone for 20 bucks, and behold the cast aluminum pump is cracked at the top section of the pump spilling oil. Is this pump worth it to maintain and invest time and energy into? Or will it break again?
@pattayperformance 21 күн бұрын
Cracks In pumps are operator error by me. Then don’t winterize the machine and water in pump freezes and cracks the pump. Install new pump and change the oil on the motor. Send it
@SamielSolos 22 күн бұрын
First time fixing a lawn mower and the lawn motor turn on after doing this. “Recommend” SUCKING ON THE LITTLE FILTER THAT HE DID. There gunt in it forsure.
@SouthernScratcherGirl 23 күн бұрын
I'm so glad I'm not the only one who HATES that Kohler engine!
@stephenfiore9960 24 күн бұрын
..intro music sucks & waste my time.,,,What brand hitch? You said 350H, but your KZfaq title says 350L
@pattayperformance 24 күн бұрын
Are you retarded? What’s the difference between an H and L that makes the video not valid for both 🤣🤣
@mitchdomaas304 24 күн бұрын
i have a mostly rust free car that came from nevada and i have had in colorado for 3 years. after watching your video and getting all my parts, tools, and a day off from work i thought i would have an easy go at this. boy was i humbled quickly. couldnt get it to budge with my impact. im going to order some new bolts, get a breaker bar and keep soaking them in penetrating fluid until the bolts arrive. thanks for the vid. im hoping the breaker bar works so i dont have to bring the car in for service
@pattayperformance 24 күн бұрын
Stop wasting time…cut them out and get new hardware from local store. Make sure GRADE 8 and use a nylon lock nut! Don’t forget anti-seize
@DJBreez2 25 күн бұрын
Thank you!!! I’ve learned so much and now I am hurricane ready because of you. You are awesome. MAGA 2024
@nathangoffiii7718 26 күн бұрын
How can I contact you to get ur input on my toro problem
@pattayperformance 26 күн бұрын
Post it here…for others to see and learn
@fostinator69 28 күн бұрын
I wedged a 2x3 in between the backrest and the engine to get to the back screws
@Turningwrenches85 28 күн бұрын
Nice work jason, that was some work with all the fuel in it especially thru the muffler