'95 Geo Prism - No Cruise Control

Рет қаралды 112,175

Ай бұрын

In this video I have a look at a 1995 Geo Prism that was dropped off with a customer complaint of no cruise control. Service data lead us right to the problem and it was a no parts required fix for this fella. Ivan would be proud!
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 850

@PatrickJMele Ай бұрын

That wasn't a job for a rookie, only a seasoned mechanic"whom should be wearing his glasses more often" could do this fix and explain in great detail. Thank you Eric

@madmax82988 Ай бұрын

You're welcome

@TheBrookian Ай бұрын

Holy smokes!! That bad boy has to be 70 or 80 HP with all of those upgrades!! NICE!

@jk9086 Ай бұрын

Yeah but did they paint the calipers red for that extra 10hp?

@dans_Learning_Curve Ай бұрын

@@jk9086great catch!! I certainly hope the owner sees this!! LoL 😅😆

@Tegelane5 Ай бұрын

I had Corolla 94 1,3i manual and it had 64 kW=88 HP, Ok no "torks". This 1,8 manual, if it's not detuned for US, should be quicker than Golf 3 Gti and serious sleeper which embarrases Honda boys at lights:)

@2zer084 Ай бұрын

@@Tegelane5 there’s nothing with under 100 horsepower that’s a “sleeper” lmao

@Tegelane5 Ай бұрын

@@2zer084 Given my 1,3 was 64Kw, I thought 1,8 could have been close to 100kW not HP. As euro 1,6 was already 84 kw=110HP. But US 1,8 was probably detuned for low end torque, and nicer drivability, not max torque at 4000 rpm. And I was talking about manuals, not slushboxes.

@NickMango Ай бұрын

The fact this car is still going in upstate ny is blowing my mind. Looks great too. I guess the fact that this person is paying to fix the cruise means they really care about this thing and that’s why it’s still going. Crazy to me.

@renj6531 Ай бұрын

this is basically a toyota corrola , if it were a GM ( although they were better back then) it still wouldnt last that long

@iFixJunk Ай бұрын

Yeah, I thought these were disposable.

@freetolook3727 Ай бұрын

Old school cruise control fix: Twenty minutes, simple adjustment and no parts. Modern cruise control fix: Hour and a half troubleshooting time with $900 diagnostic tool and $300 for new circuit board! 😂😂

@mph5896 Ай бұрын

Modern cruise control, there are very little dedicated parts. Just the cruise buttons and software. Everything else is already in place.

@CedroCron Ай бұрын

@@mph5896 Yup, drive by wire baby!

@scrappy7571 Ай бұрын

I can't remember the last time I had a problem with cruise not working.. But sure can remember ALL the problems back in the day!. Anyone remember the GM 3rd brake light bulb fiasco???

@LesReeves Ай бұрын

If mine ever fails too bad not fixing it too much trouble.

@dennisbjones Ай бұрын

Actually, I have to disagree on this one (apart from the scan tool and the $300 board). The diag would be 5 minutes with the bi-directional being able to verify the switches and inputs without needing to put your coffee down.

@jeremypilot1015 Ай бұрын

I WANT THIS CAR! 5 Speed Corolla from the mid-nineties! This is how they should build them today!

@kenj.8897 Ай бұрын

You can go to the junk yard and take your pick of colors 😅

@Alboalt Ай бұрын

I still dream of getting back my 1991 Corolla. Best car ever. My first new car. Only problem it had was the exhaust manifold cracked, which was a casting fail by the supplier that I'm sure Toyota had corrected. I got 187,000 miles on the original clutch.

@jeremypilot1015 Ай бұрын

@@kenj.8897 everyone of them in that junkyard, probably has 350k on it.

@guynxtdork Ай бұрын

What's everyone's fetish with the nineties.

@brianpiper3188 Ай бұрын

I have a 76' Corolla two door that I'm rebuilding.

@patmullen9978 Ай бұрын

You, Pine Hollow, and Camarata make up the Bermuda Triangle where all my time vanishes. And are also a literal geographical triangle.

@markkoranjr6426 Ай бұрын

Most definitely!

@dans_Learning_Curve Ай бұрын

YEP!!

@scottzehrung4829 Ай бұрын

Same.

@weldingjunkie Ай бұрын

Cam isn’t auto tho.

@milesmahan Ай бұрын

What is Camarata?link Holy grail of best wrenches get our support

@rightlanehog3151 Ай бұрын

Eric, They need to bring back the Geo Prizm!!!! As the owner of a 2005 Pontiac Vibe, I can say with certainty that we desperately need more GM cars made by Toyota. 🤩🤩🤩

@michaelkrenzer3296 Ай бұрын

Saddly, NUMMI is no more. The plant makes Teslas now.

@willemstreutgers1154 Ай бұрын

LOL Toyota knows how to make cars that almost live forever. The famous Corolla for instance.

@rider547 Ай бұрын

I agree. My daughter had an ‘05 Vibe that ran forever! Finally traded it in for a new Mazda back in 2019.

@Grandamse1 Ай бұрын

Saturn vue by Hondu.

@rightlanehog3151 Ай бұрын

@@michaelkrenzer3296In our family we have the Vibe and a 2010 Tacoma that were made by NUMMI. The thought that Teslas are made there now makes me want to 😭😭😭

@CheezburgerBrown Ай бұрын

I had a 99 corolla (same as prizm) that was the absolute best daily beater I've ever had. Thing was super cheap and easy to do maintenance on. It had the 1ZZ-FE motor which was great. It had 200k on the odometer when I got it, and I sold it with 413k, still in great running condition. I see the guy around town once in awhile, thing is still kicking. I'd have kept it, but needed 4wd after moving to the Maine woods.

@AceOnFire28 Ай бұрын

My 98 Corolla could still be kicking if the frame didn’t rust out up here in Canader!

@wallingj68 Ай бұрын

Gotta love the no parts fixes. Great to see a 95 still on the road.

@kpfalconi Ай бұрын

The "cold air" intake and headers cracked me up!

@woodturnermark8529 Ай бұрын

It was a .1 HP increase ! You need all you can get with that 4 cyl.

@RicheySynthetics Ай бұрын

I’m just baffled that somebody actually manufactured headers for that car!? Knowing or should I say hoping that somebody, one person in the world would actually buy them!? Lol.

@TXAG81 Ай бұрын

Perhaps the exhaust manifold was cracked, was unobtanium, and this was indeed the one person to purchase the header. And since we are getting so much more flow from the header, we might as well go all the way and let her “really breathe”😊.

@thk7513 Ай бұрын

All parts purchased out of the performance section od the J.C. Whitney catalog.

@80SWoods Ай бұрын

@@RicheySynthetics Maybe the layout is the same for all Toyota 4 cylinders? You’re right, I can’t imagine anyone making this specifically for a Corolla!

@blockbertus Ай бұрын

"It got the stick shift; the Millennial anti-theft device." Thank you for these awesome one-liner all the time, Eric O.!

@2020signal Ай бұрын

Poke and hope. Pull and prey. No mercy reversey. Lady there's your problem. Come on, mother lover. A baby is born!

@blockbertus Ай бұрын

@@2020signal And dont forget about all the big 2.4 liter 4-bangers ;-)

@tyenbreck1 Ай бұрын

No parts required, welcome to pine hallow diagnostics! That had me laughing. Good one

@Hey_Its_That_Guy Ай бұрын

Being a few years ahead of you, Eric, you'll eventually reach a point where you give up the struggle without them and just put your glasses on before trying to do anything within arms reach. Remember, we're all in this together! 🤣

@LesReeves Ай бұрын

I hear you got magnifiers laying about everywhere (66) years old.Had cataracts of years ago.

@luvthesnow Ай бұрын

HUZZAH!

@calebcolvin6481 Ай бұрын

I’m an automotive student at a university and watching these videos helps a ton with development in my skills. Thank you Eric O!

@efil4kizum Ай бұрын

do NOT aspire to be a SLOB like most of these monkeys out there...

@2405jacko Ай бұрын

14 mil wrench with your glasses on looks like a 17.... Made my day!!

@dans_Learning_Curve Ай бұрын

Yep!!! I definitely can relate!!!

@kevinkoepke8311 Ай бұрын

159,000 miles, 29 year old Chevy??? Oh, it's a Toyota 🤦‍♂️ Thanks, Eric! My 95 GMC is still running, but almost all has been replaced, but the cruise, which still works perfectly.

@meenie79 Ай бұрын

Oh man I miss my 94 and my 95 Corollas. Replaced the brake switch on the 95 probably 4 times and they were always garbage. The 94 had no cruise and therefore no problems. Brings back memories! Great video.

@Danzilly Ай бұрын

I drove one of them in school! That's got to be a southern car! No way that survived in newyork!

@caddydaddy9536 Ай бұрын

Millennial Anti-Theft device -> pure gold Mr. O!

@michaelashcraft2028 Ай бұрын

I learn every time you troubleshoot anything.Thank you sir plus you crack me up

@user-hl5pu3kh5j Ай бұрын

You don't see many 1995's getting cruise control repaired these days! I kinda enjoyed the change of pace! Well done!!

@clintprice2123 Ай бұрын

Eric is old school like I am, excellent work ethic and gives the customer a quality product at a fair price! I spent 45 years running a home improvement business, there was always work regardless of the economy because they always felt they were treated FAIRLY. Mr and Mrs O are wonderful people, if only we all had them as part of our communities.

@cdgregOG Ай бұрын

Bringing back some great memories with a geo prism

@lvsqcsl Ай бұрын

This is TOO simple for you, Eric. No codes. No high, medium, or low speed canbus with a 5 volt reference, etc. Just a few simple tests on a car with crank-up windows and a manual transmission. You are the best, Eric. GREAT VIDEO!

@JRBRestorations Ай бұрын

Huzzah!!!! Frazier was a well written, hilarious show. Frazier and Niles were incredibly funny. Nice diag on this. My cruise in my 82 Mercedes 380sl is not working, I am going to check my brake pedal cancel switch!

@michaeldouglas1625 Ай бұрын

My Jeep had a similar cruise control issue. I finally tracked mine down to the neutral safety switch. Someone jumped the wires to bypass the switch so the computer always thought it was in park. A simple cleaning of the neutral safety switch and undoing the jumper wire fixed all of my issues.

@danielh698 Ай бұрын

The air intake and headers cracked me up, nice job.

@dans_Learning_Curve Ай бұрын

Yeppers!! -Fast-

@mph5896 Ай бұрын

Ha. I was forced to put an air intake kit on a car a few weeks ago. The air intake boots were only available by dealer and were $900. Intake kit was $350. So a soccer mom is now running around with an Infinity with an air intake kit🤣

@truracer20 Ай бұрын

I'm sure OEM isn't available, the exhaust manifolds were an issue from day 1. It'll be ok, 80% of all cars ever produced pulled under hood air for the intake.

@robertsmith2956 Ай бұрын

Tune in next month when he sends it back for Eric to install the blower......

@robinwheatley4476 Ай бұрын

The first car I ever drove with cruise I had to try it, was an after market system, pushed the button to turn it on and the car immediately accelerated full throttle, hit the brake but it kept going...... sheer panic trying to work out how to turn it off, I was in town at the time, 30mph limit and the cruise was set to 80 I later found out, whoever fitted it bypassed the brake switches. It was years before I tried another one, now would be without it. Good fix Eric.

@ronallen6578 Ай бұрын

On the invoice list under the parts write down---GIFT😊😊. Of course there is still labor. Some shops would have gotten paid for a new part + labor. Nice to know there is still some reputable mechanics in business, but disappearing fast😢😢.

@abadbronc Ай бұрын

When I saw '95 in the title, I was all in! There was no way I was missing this one.

@lvsqcsl Ай бұрын

That GEO Prism (and later the Chevrolet Prism) is basically a Toyota Corolla with a different grille and taillights. I think that car was made at NUMMI in Fremont, California. They were good cars and lasted. GREAT VIDEO!

@jvega625 Ай бұрын

As owner of 92 accords ( yes plural) . We need more of these old school videos. Make quick work of things while it takes me months to figure something out 😂

@ShainAndrews Ай бұрын

I'm calling it. Lets see them.

@efil4kizum Ай бұрын

from the SMA channel ???

@jvega625 Ай бұрын

@@ShainAndrews mine? How can I show on yt?

@jvega625 Ай бұрын

@@efil4kizum yes. There are still a lot of old vehicles around the area . A lot plagued by rust / rot unfortunately

@efil4kizum Ай бұрын

@@jvega625 make a video and pipe it in here...

@davidkasperek3907 Ай бұрын

Gotta love the aftermarket Hot Air intake. The resulting intake howl is the satisfying part of this mod.👍

@seagullsbtn Ай бұрын

I had an 87 Chevy Nova, the predessor of the Prizm, built by Toyota and GM in what is now the Tesla factory. Fantastic car.

@CraigArndt Ай бұрын

Very cool fix. Those 1.8L's last forever, good stuff.

@leolo2222 Ай бұрын

Really appreciate the person that owns/loves that car enough to put headers on it.

@brianosgood618 Ай бұрын

Once again, Eric shows why you approach diagnosing a failure systematically. I have a 2000 Porsche Boxster that the cruise control went out. Thought it was going to be a new module (for several hundred dollars) but as I worked through the failure, it turned out it was the cruise control indicator light bulb in the dash burned out which disables the entire system. Bulb was less than $1 (which I happened to have on hand anyway). Again, work and diagnose the failure. Don't guess. Thanks again Mr. O.

@jmac-vn3rp Ай бұрын

Eric, You brought me back to the good old days when I downloaded Bowling for Soup's "1985" with my dial-up modem using KaZaa (a Napster wanna-be). I was driving a 1987 Hondoo Accord LSi with a 5-speed manual and cruise control that worked like a charm. As always, a great diagnosis.

@geordiegixxer Ай бұрын

Yet again quality diagnostic processes for the win 😊

@TheCarCrazyGuy Ай бұрын

Had a 1995 Tacoma. Had the same issue. Adjusted the clutch switch and voila. Fixed it with no parts required.

@Inisfad Ай бұрын

I drive a 1991 Geo Tracker with 227,000 miles on it. It’s actually a Suzuki, manufactured in Canada. My daily driver for 33 years

@efil4kizum Ай бұрын

i remember seeing those 30+ years ago... they are rarebirds anymore

@80SWoods Ай бұрын

I drove an ‘89 Sidekick in high school. It was great off road, mainly because of the light weight. It rolled on its side once when a drunk friend borrowed it.

@davestarr7112 Ай бұрын

One of your better videos so far, Eric. I learned a lot, thanks.

@SimiNelsonFamily Ай бұрын

Great work…NPR! I like the big money light hanging in your shop.

@jamesbruno5896 Ай бұрын

Nice repair Eric! Pleasure to see Mrs O!

@spelunkerd Ай бұрын

You're upping your game, Eric, cool intro! I love the way you walk us through a problem, explaining your thought process even though it's not a common problem or car for you.

@vollickplaysgames Ай бұрын

a 95! glad to see some "classics" on the channel. 😆

@futtbuck 29 күн бұрын

some 1990s cars are classics by age, but not yet culturally! (Most 90s cars arent considered classics even though they are 25-30 years old.)

@drainmudvayne27 Ай бұрын

you my friend deserve every sub, like and share you can get. someone so dedicated to his work like you have been over the years and still getting the grease out from under your finger nails is just gold.. best mechanic vids out there...

@jordanboulay3780 Ай бұрын

great job! customer gets a bill for 1-200 dollars id imagine they were quite happy as other shops wouldve dumped the parts cannon and charged much more with no fix…

@evolutionary-cul-de-sac Ай бұрын

Extraordinarily underrated little cars, those Prisms.

@Alboalt Ай бұрын

NUMMI Corollas.

@SalandFindles Ай бұрын

Prizms**

@efil4kizum Ай бұрын

some call them 'Corolla 'Clones''

@robertmedina6875 Ай бұрын

I honestly love the style of videos that you make Mr. Eric❤ You have this gift to teach and your videos make people feel like it’s their uncle or family member teaching them :-)😊 God bless you and your family;)

@luigigonzalez5062 Ай бұрын

Ivan been so happy lately, Solder wire harness and NPR videos 😂

@robertsmith2956 Ай бұрын

his farmer cleans the manure off first.

@tomoakhill8825 Ай бұрын

When I learned to drive manual transmissions were "standard" and you paid a line-item price for the upgrade to an automatic. My family owned three cars, Mom's, Dad's, and a beater for the two (then three) driving kids. All three were manual transmissions. Our house was on a street with three ways out of the neighborhood: all three ended at Stop Signs at the top of short, steep, upgrades. That was just the lay of the land. It was Michigan, deep in the snow belt. I, and my siblings, learned to operate a clutch with incredible precision and accuracy. We had no choice. Starting on a showy up slope is not a problem for me. I could steel this car in a flash.

@efil4kizum Ай бұрын

were those vehicles ALSO rear wheel drive OR front wheel drive? i learned to handle the clutch in 2 late 1970s toyotas with RWD in the snowy western Iowa mountains LOL

@darkknite2k11 Ай бұрын

You know it's gonna be a great video when he opens with Bowling For Soup! 🤘

@alwhitesell4023 Ай бұрын

I personally think there are very underrated band pretty awesome if you ask me.

@darkknite2k11 Ай бұрын

@@alwhitesell4023 totally agree!

@Wayne-Jones Ай бұрын

Order a switch ready Mr O, I’ve got a gut feeling your gonna see that car again soon.😉 Good job 👍

@alveus8205 Ай бұрын

Oh man, I had a manual Ford Escort in the 90s. Accelerator pedal went down when cruise was on. I loved that.

@GeminiSeven43 27 күн бұрын

I had an interesting cruise control problem on a Mazda 626 where the cruise control would drop out occasionally and it turned out to be a melted rear tail light socket and the running lights were drawing current through the brake light due to a bad ground. I didn't figure it out until one time during the day when it started raining and when I turned the lights on boom no cruise control. Great video as always Eric and I like the "No parts required" nod to Ivan.

@2aminitials Ай бұрын

23:43 Wes at WatchWesWork watching this screaming, "NOOO!" as the PTSD flashbacks hit.

@rjb6327 Ай бұрын

Always nice to see Mrs. O.

@coreyrichardson3125 Ай бұрын

i had a ford car that cruise would shut off when car would flex going into a dip in road. found the switch on pedal was bad. i like the pine hollow diagnostics comment you guys respect each other and use each others videos .

@user-pp1ni2jy3f Ай бұрын

WOW, a '95 in NY! Must only be driven in summer.

@JoseSilveira-newhandleforYT Ай бұрын

Great job, Eric! Living in a country on which everybody drives stick shift, I never thought that it could be a theft deterrent but, now that you mentioned, it makes sense 🙂

@glenharper3136 Ай бұрын

Thanks for the video Mr & Mrs.O.

@hvac4u2 Ай бұрын

Another great diagnostic and fix. No parts and a simple adjustment. Your videos are great Eric O! Hoping younger folks will be inspired to do what you do the WAY you do it. All trades are in a crunch for quality techs these days. Sharing your process and making it fun! Thanks for being that guy... priceless!

@billbrock5486 29 күн бұрын

Very interesting process. Thanks!

@stationaryenginesworldwide Ай бұрын

Great one Eric! Always great entertainment at SMA

@dnprall Ай бұрын

We had a Chevy Prizm! Loved that car......until my wife didn't let me know that the oil light had been on for quite some time :(

@gregsidel3557 Ай бұрын

Good job Eric i'm glad you had the information you needed to figure this thing out Thank you for the video

@SteveMelissaMcAdams Ай бұрын

I installed maybe around 500 aftermarket cruise controls on those things in the late 80's to early 90's for the chevy dealer I worked at. That used to be a big add-on on new cars back then. We did rear bumpers, radios and cruise controls and also clear coat protection and undercoating

@crlaw75 Ай бұрын

That's awesome! Blast from the past.

@davidcoates4852 Ай бұрын

That beautiful intro took me right back to the 80s. Love it 🔧👍👴

@kristiang.5237 Ай бұрын

Well taken care of vehicle and someone who uses cruise control 💪🏼

@dans_Learning_Curve Ай бұрын

Another excellent video from SMA!!

@JohnDarwin7 Ай бұрын

Good troubleshooting, nice job.

@raymondhorvatin1050 Ай бұрын

good job thanks for sharing

@ejwxb2561 Ай бұрын

Well done Sir! Interesting about the low brake fluid wire...I was expecting a jumper repair.

@Filtered-lw3gw Ай бұрын

Brings back memories. Cool driving there, holding a camera and shifting manual gear, all you are missing is a burger and a drink 🙂. That car looks mint, does not look like it is from your normal NY rust area. I had a 95 Corolla DX back then, gone now, brother-in-law totaled it. I still have the strut tower brace for it, to the owner of this Prism wants it let me know, you can have it for free.

@Micko350 Ай бұрын

Eric this has to be the most interesting Clutch Switch adjustment Video(the only one) I've seen!

@hpurey Ай бұрын

Love to see the older stuff still on the road. That air filter setup takes the "E" out of GEO. It's all GO now, as long as your foot is on the gas until SMA fixes the cruise control. Typing this before the video is over but fully expecting Eric to to put the "EO" in GEO.....Go Eric O.

@Supersonicff-dw6bs Ай бұрын

I was waiting for the Geo thunder comment!

@jameshampton3969 Ай бұрын

Love your channel, love the area your in. You're such nice people and incredibly professional. I can tell you're a "car guy", like me, and that you treat your recoveries with that in mind. I'm originally from Tennessee and She keeps calling to me. One day I'll return and I hope that the people there are still as nice and kind as you good folks are and continue to be. God bless you and your family.

@wdxwm300 Ай бұрын

Oh happy day when you get something figured out ,Good Job

@stevenclaeys6252 Ай бұрын

Thank you for another great video. Cheers

@nobodyhome8148 Ай бұрын

Great Save Eric ...... YOU da MAN !

@Krankie_V Ай бұрын

Good find! I probably would have replaced the switch anyway for good measure, honestly. I wouldn't want to risk the chance that the switch is indeed failing with an intermittant fault.

@banshee350rider2 Ай бұрын

Absolutely love the Bowling for Soup reference!

@mitchk.9049 Ай бұрын

Thank you this brings back memories of high school. Now I gotta find a rust free one for my kids. They were reliable cars!

@johngassmann9581 Ай бұрын

Nice no-parts fix, Mr. O.

@Tablesaw818 Ай бұрын

Always great to have a guest appearance by Mrs O

@timd1833 Ай бұрын

orbs? hahaha

@j.v.plogan.9546 Ай бұрын

Anti theft device. Classic!!

@Vintage0007 Ай бұрын

Very interesting on how the cruise control system works!

@nicholasoverby1704 Ай бұрын

Easy on the test drive. Might roast the tires off it with all those preformance upgrades.

@mikemiller3565 Ай бұрын

Mechanical switch problem. Old school nice job

@TXCherokee Ай бұрын

The gas regulator diaphragm expands and contracts with ambient temperature change and release a small amount of natural gas. Hence the odor

@billylane6602 Ай бұрын

Millennial anti theft device😂

@ozzykrahn806 Ай бұрын

its true

@erickieffer8440 Ай бұрын

My morning wasn’t going so well; just blew a couple holes in an almost paper thin meticulously coped tube, attempting to weld it to a heavy $30+ stainless nut. So I decided to take a break and was pleasantly surprised by another of your excellent diagnostic videos. I think my day has just gotten better. Thank you.

@briandeschene8424 Ай бұрын

Courage! Don’t give up and fortune to you. (Sorry if not correct, English is not my first language.)

@erickieffer8440 Ай бұрын

@@briandeschene8424 Thank you, you are correct, this is something that will require courage and perseverance. The two pieces separately want about a 50 amp spread to make a puddle. I think I’ll be spending most of my time on that nut hoping a little bit of the puddle will spill over onto the tube.