I thank you for sharing as there are very few repair vids for this camera. Better than nothing and wish you would make more on this model.

Fixed my shutter winding problem.

I know its an old video, but thanks it just saved my camera.

You could put a video on Pentax Soptmatic F ??

Solved my problem thanks soo much!

Hello! I did it as you show with my Pentax 6x7 MLU and it did not work. Do you know why could this be happening ?

Hi Mike, thanks for sharing! What type or test film/ brand are you using on your video?

Hello. I have a pentax 67 that I haven't used in years. I decided to start experimenting with it again. it was stored with the battery removed. i got a new battery, the battery checked good, and the light meter in the ttl viewfinder worked. i went out to try to shoot the remaining film that was in the camera (was in there for years) and the battery was dead. i put another new battery still nothing. i also encountered the problem of the film winder lever will not turn, it only advances about an eighth of the way along its path, and the shutter release will not fire.

Hi, I've got an old 55mm lens for this camera with a fungus right in the middle of the lens. Do you know how i can open the front part? Thanks a lot for your videos, I could clean the oily blades of my Mamiya 645 80mm. Thanks a lot for sharing all this information/education. Have a good year!!

Can you explain what is happening on the right side of camera? Because my cameras advance lever slips whenever I try to load a roll, but I’m sure my camera works fine because when I trick the camera into thinking it has a roll it shoots perfectly fine.

Yes! Thank you!

Hello.i am using the pentax 67 with the 75mm f4.5 lens and when turning the focus ring until the infinity sign and aiming to a very far object i need to turn the ring a little bit back to get the focus

Where do I get that lubricant?

Hi there.

thank you for sharing this, i know its an old video, but I hope you can answer 1 question. I see that most of the lubricating is done underneath, at the spool end. is it absolutely necessary to open up the top to also lunricate there? i notice most of the lubricating occurred in the area that required no dismantling. from what I could tell the only thing that was done on the dismantled part, was some lubrication to the top of the spool on the inside. did I miss anything, or is that the only thing done there? I am hoping to avoid dismantling and give the area som needed lubrication.

I have a prob with my film loader spring on the left of the camera. Is there a way i can send you a picture and maybe you could help

This is the exact problem I have! Where did you get the lubricant ? And how careful show you be putting it when you take of the shutter speed dial. I couldn't see clearly exactly where you put the lubricant there

mine does not advance the film properly, so exposures overlapping, how could I fix that?

Do you know what size screwdriver you are using on the shutter speed knob?

Great video! Do you think WD40 would also work?