BBSHD upgrade kit ASI BAC 855 P&P

Рет қаралды 23,808

3 жыл бұрын

To order upgrade kit visit at this shop:
www.taisomirgaminam.lt/en/pro...
Or visit our Facebook:
/ taisom.gaminam
Controller is programmed for 36-72v battery and 4000w, 106amps peak power. (for special order, settings can be changed.)

Пікірлер: 78

@SpreadingKnowledgeVlogs 2 жыл бұрын

I have a similar set up but use the nxt display from my boy Alan at ERT what's nice about that is the full tuning capabilities from the display itself and you can also run the egg rider v2 display on the same harness and switch back and fourth if you want something smaller at times

@luckyfire3 2 жыл бұрын

I can't wait for the black Friday deal this thing looks awesome.

@comfortablynumb8832 9 ай бұрын

Did you buy one

@luckyfire3 9 ай бұрын

@@comfortablynumb8832 no they were never a good deal unfortunately

@mattjonesturbo1 2 жыл бұрын

Seems like the cyc x1 stealth kit uses a similar controller, eliminates the need to do anything and much cheaper in total. I wonder what the performance comparison would be. 🤔

@yellowsheeps 2 жыл бұрын

CYC X1 Stealth is lighter, includes same controller and has "torque sensor". BAC 855 housed beside motor (cleaner install). CYC motor is more powerful (1500 W). The only thing BBSHD has vs CYC X1 Stealth is history, proven reliability and availability of spare parts.

@JohnjOcampo 2 жыл бұрын

@@yellowsheeps i bough the bac855 from CYC, will it still work for my bbshd? Cause it said it was only programmed for CYC motors but i figured that was just a warranty thing.

@yellowsheeps 2 жыл бұрын

@@JohnjOcampo The CYC Bac855 controller is only for their 2 motors and even in this case, the Bac855 is not interchangeable between the 2 motors without re-programming. To use the Bac with the bbshd, you would need it re-programed by someone familiar with programming a bac855 for a bbshd.

@JohnjOcampo 2 жыл бұрын

@@yellowsheeps wow man what a huge mistake i made, im going to see if i can cancel the order. Thank you for the info. Where should i buy the asi bac855 for the bbshd?

@yellowsheeps 2 жыл бұрын

@@JohnjOcampo The link from this video is a seller. The Bac855 is in short supply and on back-order worldwide so you should have no problem selling one.

@slabvu55 2 жыл бұрын

Does this controller have a limiter

@TheADRIANOVALENTINO 2 жыл бұрын

Thats awesome. How much more is the torque watts and speed? Without that modification its around 165 NM torque , 1500wt peak, and up to 65km hr.

@fabijus100 2 жыл бұрын

Hi, All details you can find here: www.taisomirgaminam.lt/en/product/asi-bac-855-pp-versija-bbshd-varikliui/

@TheADRIANOVALENTINO 2 жыл бұрын

@@fabijus100 Ok il have a look. Thanks for your response. Im not a computer electrical guy, bit of a stupid question but I was wondering where you hook up the battery? Do you have a video on the conversion build ?

@TheADRIANOVALENTINO 2 жыл бұрын

IM looking at the item doesnt say how much more powerful and faster it is maybe im blind..lol

@fabijus100 2 жыл бұрын

@@TheADRIANOVALENTINO The controller is programmed: FOC Voltage: 36-72v. Power: 4250w.

@johnnylong2049 Жыл бұрын

Can I use a 52v one day and a 72v the next day without having to change anything (display, or changing stuff on the computer)?

@fabijus100 Жыл бұрын

Hi! yes, we can program controller to work with all batteries. Contact us directly - info@taisomirgaminam.lt for more information.

@davidfreund8844 2 жыл бұрын

Asi Bac 2000 und bbs02 Geht das auch ?

@vincentvincent2658 2 жыл бұрын

is the included eggrider the one for 30 to 52v or the 30 to 72v?for the 72v do i have to + it

@fabijus100 2 жыл бұрын

Hello, There is the option to use EggRider with all batteries.

@thonkingintensifies9510 3 жыл бұрын

Is there a way to measure the internal temperature of the motor, so it doednt overheat

@raffg341 3 жыл бұрын

buy a digital thermometer from an aquatic shop and install when opening casing

@SpreadingKnowledgeVlogs 2 жыл бұрын

Yes there's a way but there's a lot you need to do to get it working and you need to have both back door access and knowledge of how to wire it up.

@Andaeldiabloitsomar 2 жыл бұрын

Would the bac 855 work on a RX motor?

@SpreadingKnowledgeVlogs 2 жыл бұрын

If you mean a super73 Rx then yes it will work on any brushless motor

@thomasjurd4144 3 жыл бұрын

Where did you buy . I was concerned about speedo

@fabijus100 3 жыл бұрын

www.taisomirgaminam.lt/en/product/asi-bac-855-pp-versija-bbshd-varikliui/

@JoseLuis-wz6xh Жыл бұрын

Hi, can this kit work with any other display like the 500C? Or eggrider? Or is it only with the one shown compatible? Thank you

@fabijus100 Жыл бұрын

Hello, It can't work with 500C but it can with eggrider. Check it out: www.taisomirgaminam.lt/en/product/asi-bac-855-pp-versija-bbshd-varikliui/

@JoseLuis-wz6xh Жыл бұрын

@@fabijus100 Thank you very much for the response. I am about to purchase this controller paired with the eggrider V2. The only question remaining would be, what would be the minimum requirements for a battery to run this system? l have a 52V 13Ah with a maximum rated 30A discharge continuous, would that be able to run or should I upgrade to a bigger battery? Best regards

@fabijus100 Жыл бұрын

@@JoseLuis-wz6xh we can program controller for your battery but if you want to get maximum power we would recommend to use 52v with 70a discharge or 72v with 50a discharge current.

@JpBillardreviews 3 жыл бұрын

Does this work with the 750 BafaBBSO2

@yj8471 Жыл бұрын

Yes I use one on the 02 they work fine

@Edward-nz4ck 4 ай бұрын

Wow

@JohnjOcampo 2 жыл бұрын

Hi i am planning on buying this kit but i already have an eggrider V2, can i get the kit without the display?

@fabijus100 2 жыл бұрын

Hello, Yes. Contact directly with us via email: info@taisomirgaminam.lt

@JohnjOcampo 2 жыл бұрын

@@fabijus100 got it, thank you.

@ruslangozoloev9089 Жыл бұрын

Hello friend, if I have a 48v battery, I can change the parameters to 60/72v and what won't happen? Tell me can this be done with bbs02 750w? If you can write in Russian through a translator.

@fabijus100 Жыл бұрын

Hello, please write your quetion in English to info@taisomirgaminam.lt we will answer as soon as possible :)

@Mist3Rray 2 жыл бұрын

Are these kits still available? if so what is the Cost to ship to US? California?

@fabijus100 2 жыл бұрын

Yes, www.taisomirgaminam.lt/en/product/asi-bac-855-pp-versija-bbshd-varikliui/

@A.G_369 4 ай бұрын

For bbs02b?

@smarc1325 3 жыл бұрын

Worth the Money after all?

@fabijus100 3 жыл бұрын

Yes, Because speed and torque is bigger!

@smarc1325 3 жыл бұрын

@@fabijus100 im considering about buying 😁 thnx for answer🙋‍♂️

@TheFilminators 2 жыл бұрын

Can this be put on a bbs02?

@yj8471 Жыл бұрын

Yes I use one on the 02 .

@pc9395 Жыл бұрын

Been trying to get mine to run from the Eggrider but with no success can anyone point me in the right direction I have a useless broken 750c screen that will not power up, and find it impossible to replace with the BAC855 protocol

@fabijus100 Жыл бұрын

Hello, Contact us by email - info@taisomirgaminam.lt We will offer for you 750C display which will work with ASI controller.

@yj8471 Жыл бұрын

@@fabijus100 can you program the C500 mini it's a smaller better unit ?

@fabijus100 Жыл бұрын

@@yj8471 Hi! Send us an email - info@taisomirgaminam.lt Do not forget to add all necessary information and we will reply to you as soon as possible!

@pc9395 Жыл бұрын

@@fabijus100 what information ?

@fabijus100 Жыл бұрын

@@pc9395 Hi! The previous message was to @yj847. For the @pc9395 Contact us by email - info@taisomirgaminam.lt And describe your problem.

@jeffonrides Жыл бұрын

Hey does it matter which phase wires are connected together?

@motul800 Жыл бұрын

3 or 9 support levels ?

@fabijus100 Жыл бұрын

yes, you can choose between 3/5/9

@cohengal1584 3 жыл бұрын

did pas work?

@fabijus100 3 жыл бұрын

Yes

@bpoman1234 2 жыл бұрын

Will this work with bbs02?

@fabijus100 2 жыл бұрын

Contact directly and ask 😉 Info@taisomirgaminam.lt

@yj8471 2 жыл бұрын

Yes it does I run one on 52v at 2600w same display runs perfectly..

@motul800 Жыл бұрын

Hello, can I choose between 52, 60 and 72 volts on the display? Can I adjust the strength of the support levels myself like with the bbshd controller? Can I set the max ampere myself?

@fabijus100 Жыл бұрын

Hello, you can change each assist level power by % in advanced settings. Talking about batteries - we can program controller for one specific battery or remove all limitations which depends on battery. For more information contact us on Facebook- Taisom ir gaminam Or email- info@taisomirgaminam.lt