Carnage Plus EP61 - Building A Barra For Boost Part-2
Рет қаралды 89,071
4 жыл бұрынHere's part two of our budget Barra build. We've done all the prep work, now it time too bolt it all together.
Subscribe to Street Machine for V8-powered good times goo.gl/DTXEnl
Street Machine is Australia’s number-one modified car magazine, bringing V8-powered good times since 1981.
We live for tough street cars, and the guys and girls who use them. Our channel features event coverage from all over Australia, including burnouts, drag racing, dyno competitions, show ’n’ shines and high-quality technical videos.
So follow along as we bring the magazine to life, and remember to check back regularly for new videos.
Street Machine | www.whichcar.com.au/streetmac...
Facebook | streetmachinemagazine
Twitter | / streetmachine1
Instagram | / streetmachinemag
Google+ | plus.google.com/+streetmachin...
Pinterest | / streetmachine1
Get the mag | goo.gl/CcukDF
Read on Newsstand iOS | goo.gl/QzSTgH
Read on Zinio | goo.gl/mbiqKr
Read on Magzter | goo.gl/AdF42f
Join the conversation: #streetmachinemag
@krispykruzer 4 жыл бұрын
Everytime I watch an engine rebuild video, I tell myself this knowledge and skillset CANNOT die... Beautiful to watch man and machine both coming together
@Sfrrob1 4 жыл бұрын
Thanks for taking the time to slow the process down and breaking it into a few videos for us. Its pretty informative stuff, much better than just glossing over the fact you had to tear down half the engine to do valve springs and oil pump gears!
@nordic5490 4 жыл бұрын
Valve spings can be done whith the head on. Use that tool to depress the valves and compressed air in the sparkplug hole to keep the valves up. Head studs can also be replaced with the head on. Yes, oil pumps gears are a pita, but are not needed in a street auto not banging off the limiter. $1000 for an oil pump gear set, not worth it, or neede, for a $150 green top.
@nathan2483 4 жыл бұрын
Lol! The shifter through the sump was gold!
@bearservicesaus9496 4 жыл бұрын
Can you put the back ground music down when people are talking please
@michaeldaley4418 4 жыл бұрын
Fuck the music off all together it's SHIT.
@SootySweep22 4 жыл бұрын
Bear services Aus The editing on this channel is usually pretty good. It’s a shame he’s so hard to hear over the music.
@MrPropanePete 4 жыл бұрын
Yep, agree. Don't need background music at all in these types of videos
@fanimej 4 жыл бұрын
Yes, very annoying!
@janeblogs324 4 жыл бұрын
No one listens. This is top comment on almost every channel
@jamesblanton9364 4 жыл бұрын
"SBT" Scotty Barra Taylor, haha, ya'll gave me a giggle when you lifted the thingimy bob off and up came the hand with the adjustable shifter. I love this long standing adjustable shifter joke, keep up the awesome and entertaining work you blokes, coz we all are loving it. Oh have you met Billy Bob Budget who helps out the haulass garage boys occasionally ?
@klg2440 4 жыл бұрын
I watch your vids whilst on my exercise bike and it makes the time fly. Keep em coming Scotty it's my Corona excitement
@fisherengineering6947 4 жыл бұрын
For people doing this at home, one mistake he made which caused him some trouble was the screws on the oil pump gears, your best to get an impact are a driver and tap the screw whilst winding out, also when turning the cams to put timing chain back on don't turn them with the bolts on the front, use the correct size spanner on the big casting bosses on the front of the vct mechanisms to ensure you don't snap or overtighten the bolts.
@DeL8r Жыл бұрын
cheers
@asjmpickle 4 жыл бұрын
love the work scotty so glad streetmachine let you take this and run with it.
@xe0ngd2 2 жыл бұрын
"i reckon three uggah duggahs should do it" youve just solved the metric vs imperial argument.
@lukeya1983 4 жыл бұрын
I enjoy watching your weekly videos Keep it up They are great 👍scotty
@cars3800 4 жыл бұрын
Good job guys, keep em comming!!
@gavinb9627 4 жыл бұрын
Once again we tip our hat to super skilled craftsmen at Max
@jamiegreenwood7996 4 жыл бұрын
cant wait to see the green top installed into mazda up and running .........good effort scotty
@HenryDarr 4 жыл бұрын
Keep it coming #barratheworld Stay blessed brother 🤙🏾🤙🏾
@Benjay1975 4 жыл бұрын
another amazing video, outstanding Scotty!
@travisboorman8084 4 жыл бұрын
Loving it keep them coming Scottie.
@doogey2001 4 жыл бұрын
Great video mate I’ll look forward to the next one 👍🏼
@leonardwalters154 4 жыл бұрын
Good job, looks like you are shaving down the project load and getting closer to play time
@Paul-qq7mh 4 жыл бұрын
Very informative Thanks Scotty.
@zuno555 4 жыл бұрын
Great 2 part video and great channel, love it!
@baikal4784 4 жыл бұрын
Scotty is the Barra King....
@RAYtheram 4 жыл бұрын
I'm an ls fan but can't wait to see the old girl going Choo choo! Looking most forward to the majestic vn up and running!
@manitoublack 4 жыл бұрын
Finally a you tube engine build video where the head studs are put in after the head is laid in place. Makes life so much easier. Good work Scotty. Though why you wouldn't put in bigger bump sticks in while playing in the weeds still suprises me ;)
@STREETMACHINETV 4 жыл бұрын
Budget
@gavinb9627 4 жыл бұрын
@@STREETMACHINETV Dem bloody bean counters again ehh
@pauljohns8215 4 жыл бұрын
Another great video keep on the good work
@plumbs7199 4 жыл бұрын
Great vid !!
@cliffharrington6500 3 жыл бұрын
Brilliant, best video I have seen for illustrating timing chain set up, showing the crank trigger wheel removed really helped me set my timing chain up properly after changing a blown head gasket. I still have to find out why the twin fans only work when the air con is on, I'm picking the CHT (cylinder head temperature) sensor may be faulty, but the temperature gauge operates so I'm not sure. May be the something else.
@habertone 3 жыл бұрын
Mate, really good video, I'm doing my Territory just following you, hopefully will work. Cheers
@someyoungguy6990 4 жыл бұрын
You guys crack me up with your random Nut F#@kers. Keep up the great work!!
@MrVnssbt1 4 жыл бұрын
Not afraid to admit of a mistake awesome mate keep up all the hard work we all make small mistakes
@STREETMACHINETV 4 жыл бұрын
People don't learn from success
@DodgyBrothersEngineering 4 жыл бұрын
lol you nearly have gave me a heart attack. Whizzing down the head studs... Phew thank goodness he back them off.
@STREETMACHINETV 4 жыл бұрын
I always back them off half a turn
@DodgyBrothersEngineering 4 жыл бұрын
@@STREETMACHINETV surprising how many people don't read instructions and know you need to.
@andrewtaylor9615 4 жыл бұрын
Loctite on the head studs?
@raycorcoran6179 4 жыл бұрын
Really helpful video would love to see you do a ls one as well. as I have plans to buy a ls1 from the wreckers pull it apart and put it back together with better parts to put in my hq. And I also want to do the same with a Barra
@allthingsexterior5245 4 жыл бұрын
cut the music. pure voice is relaxing and soothing lol
@gregwah 4 жыл бұрын
Yeah can't really hear the talk when the music is going
@Fortnite87463 4 жыл бұрын
Good video, keen for more valiant wagon videos
@STREETMACHINETV 4 жыл бұрын
I'm working on it today
@1953fords 4 жыл бұрын
Once again Scotty simply perfect! I am so pumped. Can’t wait to see this rip. Gives me hopes on my build. From real world experience how much can a 2010 FG stock bottom end handle? Thanks for your wealth of knowledge. Cheers
@braydontaheny4982 4 жыл бұрын
Must admit, you had me for a bit there when you gave the head studs just 3 Ugga Duggas 😳
@timruiter5460 4 жыл бұрын
I'm in Michigan, USA and I really want to buy and build one of these Barra engines!
@MrVnssbt1 4 жыл бұрын
Good video mate
@petejones961 4 жыл бұрын
Thanks for the tip when torquing down, i always thought it was for eg. 8 NM first then 12 NM last, so they mean there abouts not under not over
@STREETMACHINETV 4 жыл бұрын
That's an interesting theory
@RICHOWASP 4 жыл бұрын
your pretty cluey there Scotty 👍
@UTPP 2 жыл бұрын
Good video, thank you. What would an upgrade like this cost?
@Dave-id6sj 3 жыл бұрын
Did you leave the timing chain on its correct position on the crank sprocket or did I miss something and you lined up any dots on the bottom as well as the top markers?
@MafiaboysWorld 4 жыл бұрын
Scotty flossing on me with the Gasket Remover 3000 while I'm stuck with the Gasket Remover 2000 (aka a wire wheel on a hammer drill. 😂🤣). This rebuild has been awesome Scotty. It's given me an idea for a cheap (but stupid) project build in the future. 👍
@wobblysauce 4 жыл бұрын
3000 is great, tho just like the 2000 is happy to take a finger.
@MafiaboysWorld 4 жыл бұрын
@@wobblysauce That's what you call a MAN-icure. 😂👍
@gavinb9627 4 жыл бұрын
As long as you hurt no one, there is no such thing as a stupid project
@MafiaboysWorld 4 жыл бұрын
@@gavinb9627 Only person I would have hurt would have been myself. My worst one was my engine swapped Mazda 121 bubble with well over 200hp and ZERO brake and suspension upgrades. 😳😬 Sort of a blessing in disguise it was written off by a drunk driver while parked mid project. 🤔 Stupid me wants to do it again though as I never got to take it down the strip...🤷😂
@mikeymasi 4 жыл бұрын
nice job scotty
@STREETMACHINETV 4 жыл бұрын
Thanks dude, a little appreciation goes a long way
@marktaylor1498 4 жыл бұрын
Have you increased ring gap? Being gas engine it have minimal ringgap as it wasn't intended for turbo application. Number 1 cause for making windows in engine block
@mattjones7174 3 жыл бұрын
What thickness mls did you use? Do you need to consider the compression ratio for the e-gas engine? Do you need to re gap piston rings for the e-gas? I am getting a lot of different answers from people who have not built an engine.
@ulrik1982 4 жыл бұрын
Great video. The music was a little to high.
@STREETMACHINETV 4 жыл бұрын
Noted, the new editor has been informed
@nickwil493 3 жыл бұрын
Nawww u sook
@dylanenricholeroux7163 3 жыл бұрын
Can you use this engine in a petrol car as well? And how much rear kw does it make? Also do you just switch your intake? Really enjoyed this video
@Danielg-wv7hw 4 жыл бұрын
What thickness cometic head gasket is used I need to know as I'm going to build one of these
@greggee5695 4 жыл бұрын
Well done Scotty , just a note not sure if you did it off camera, but i always rotate engine by hand after doing valve timing and recheck it.
@STREETMACHINETV 4 жыл бұрын
Trouble is that to check it on these you have to rotate the engine 36 times - true story
@davidvincent2838 4 жыл бұрын
3 Ugga Duggas on the head studs......... Love the Haul Ass reference
@theranga3364 2 жыл бұрын
Bro said 3 ugga duggas and i lost my shit
@GIDO74 3 жыл бұрын
Please tell me why the sump was changed/modified so much? Was it for clearance on the car it is getting fitted to?
@withinb7268 6 ай бұрын
Hey mate what is the 3m wheel you guys are using to remove gaskets what’s it called exactly thanks
@blissgaming7559 3 жыл бұрын
Are they green too Barra rocker covers painted green in the inside
@lindsaymccullock1176 4 жыл бұрын
You need to pre lube your cams dude. Bit rough going in dry. Hopfully you have assembly lube in hand for the 3800 there pretty rough to begin with
@michaelcstephens2783 4 жыл бұрын
Bring on the dyno video !!! Great work mate. What ECU are guys using?
@STREETMACHINETV 4 жыл бұрын
We have a factory FG NA ECU in there but we are swapping to an FG Turbo ECU soon to give us better boost control.
@adamvirgulti 4 жыл бұрын
How many adverts did you jam in? Not including ryobi
@HEKTIC458 4 жыл бұрын
The music is too loud scotty :)
@davidjohnson8474 4 жыл бұрын
Scotty this is way cool engine! Too bad they didn't bring them to the states!
@STREETMACHINETV 4 жыл бұрын
They are a great engine and once you get your head around the hi tech features they are remarkably simple and easy to work on. In wish the US had got them as well.
@davidjohnson8474 4 жыл бұрын
@@STREETMACHINETV ya I know. We have a sick 6cyl here called the 3.5 EcoBoost V6 and with a little bigger turbos on it easily make 600hp+! I'm really thinking of putting one in my 70 mach 1 mustang! But if I had access to a barra I'd put one in!
@jmyd83 4 жыл бұрын
Mazda 6 rotor 👍🏻
@remirichardson4301 Жыл бұрын
Oem timing chain with aftermarket springs?
@CoreysCompound 4 жыл бұрын
No sealing issues using mls gasket without decking the head/block Scotty ?
@STREETMACHINETV 4 жыл бұрын
Never had an issue before
@lachlancheney7303 4 жыл бұрын
Hey Scotty I’ve turbo converted a dedicated gas Barra engine and just wondering do you use the turbo ecu or the gas one? thanks.
@STREETMACHINETV 4 жыл бұрын
We used an FG Petrol ecu to start off with. The LPG ECU doesn't have injector drivers
@keyzerdos134 4 жыл бұрын
Love that Scotty slaps an MLS gasket on an un-machined block.... Well it wouldn't be carnage if he didn't learn the hard way 😂
@STREETMACHINETV 4 жыл бұрын
Done it plenty of times
@justanotherguy9664 4 жыл бұрын
@@STREETMACHINETV For some reason, there are people that are so myopic that anyone who does not fit "all-new" parts, and machine every surface is not doing the job properly. As Scotty would know - machining a gasket surface not only lessens the chance of future rebuilds due to material removal, but it also can introduce far more work (and suffering) when tolerances are out of specifications. Ask the guys that get "all the machine work" done on an old V8. And then the inlet manifold doesn't fit. And rocker angles are wrong. And push rods don't fit. And they need to get their pistons relieved. Etc, etc, etc. Sure, Scotty doesn't have all those issues on a Barra, but he is showing what your "average Joe" can do in his garage with minimal effort and time. He isn't changing cams nor tolerances, therefore he can throw it all back together without too much drama - as can some girl or guy at home who has never worked on an engine before.
@anthonycavalliotis8736 Жыл бұрын
I just reinstalled cylinder head of my BA falcon lpg ute with 500,000 km's which needed new exhaust valves. I just took the time to polished the block with emery cloth until it was nice and smooth, have had no problem. How much extra work & cost would it have been to do what you say and remove whole engine and machine block?? It is made of thick steel, so how could it deform??? Cylinder Head is alloy.
@Ricks408 4 жыл бұрын
Those old plugs 😑 I've never seen a fresh set of plugs help a fresh build before anyway 😂 least she's buttoned up and good to go nice work 🖒
@STREETMACHINETV 4 жыл бұрын
They let us down on the dyno, it was a dumb move. New plugs made a massive difference
@xeftones 4 жыл бұрын
@@STREETMACHINETV 😂 Love the honesty
@genarosanchez758 3 жыл бұрын
Good video Where can I gate engine Barre
@STREETCARCULTURE 4 жыл бұрын
👌🏾
@captain1334 4 жыл бұрын
oh and scotty my xb barra swap may also be doins 8.9 secs in 1/4 mile
@kenkaese1271 2 жыл бұрын
What is the procedure with the head studs ? Are the torqued aswell ?
@STREETMACHINETV 2 жыл бұрын
Studs are just screwed in by hand
@kenkaese1271 2 жыл бұрын
Thanks. For sharing love it cheers mate
@lilylulu7208 4 жыл бұрын
Love what you’re doing, but just got 1 complaint. What with the background music Scotty? Can hardly hear you talking. Some idiots might be interested in what you’re saying.
@stoneshrink 4 жыл бұрын
3 ugga dugga torque spec.... priceless :-)
@jasonwest368 4 жыл бұрын
some free advice in a high compression engine the rings need to be gapped.this the most likley why nothing stays together for long.
@123chrispapa 4 жыл бұрын
thats one way to snap a camshaft :P
@STREETMACHINETV 4 жыл бұрын
Snap. A. Camshaft. okay then.
@MrWilliam.Stewart 4 жыл бұрын
Hello Barry
@denisjovanovic7781 4 жыл бұрын
@streetmachinetv do you guys have a online shop?
@STREETMACHINETV 4 жыл бұрын
we do, Check out the Street Machine Website
@IJ-E36 4 жыл бұрын
Turn the music volume down a bit please...
@abccba3903 4 жыл бұрын
Music is too loud,. We want to hear the dialogue, not the crappy music selection.
@MrDOHC1JZ 4 жыл бұрын
Watching you do those cam caps gave me anxiety. Was waiting for one to snap
@STREETMACHINETV 4 жыл бұрын
Haven't hurt one yet
@MrDOHC1JZ 4 жыл бұрын
@@STREETMACHINETV cools, i'm a JZ guy, you can snap a cam or cam-cap real fast doing that
@ThePenguin360 4 жыл бұрын
Can you put the back ground voices down when the music is playing? cheers Scotty.
@vipxj1 4 жыл бұрын
So what's the difference between normal redtop barra and the greentop???????????
@STREETMACHINETV 4 жыл бұрын
Depends on the year model
@Eugene_Crow 3 жыл бұрын
How this engine send to Russia? How mutch it cost, and how muth shiping costs?
@brycebullman2270 4 жыл бұрын
What book are you reading from for the torque specs? I badly need this information
@STREETMACHINETV 4 жыл бұрын
Workshop manual. I agree that its hard to find this info online
@brycebullman2270 4 жыл бұрын
STREETMACHINETV thanks champion 👍
@darrenjones3159 Жыл бұрын
@@STREETMACHINETV 8:12
@LsMaloo 4 жыл бұрын
Just out of curiosity,how much oil does the modified sump hold?
@STREETMACHINETV 4 жыл бұрын
It doesn't change the oil capacity
@LsMaloo 4 жыл бұрын
There you go, you learn something new everyday.
@STREETMACHINETV 4 жыл бұрын
The whole sump isn't full of oil
@LsMaloo 4 жыл бұрын
I know bugger all about these Barra engines I will admit that. So where does all the oil sit if it’s not all in the sump like most other engines are? I’m curious I’ve never opened one of these up.
@STREETMACHINETV 4 жыл бұрын
@@LsMaloo We haven't changed the capacity of the area where the oil sits
@brentonk461 4 жыл бұрын
"Hand Grenade Green"
@JosephcallsmeNolan 4 жыл бұрын
I have a really dumb question. I am not a qualified mechanic.. But dabble. What is the rationale behind torquing bolts etc? To me if it's tight and doesn't split or break seals, gaskets.. Should be good enough. Please advise.. Thanks
@nordic5490 4 жыл бұрын
Alloy (and iron) parts deform when torqued, the design engineers allow for this deformation, so that every thing is aligned just right at a certain torque.
@STREETMACHINETV 4 жыл бұрын
Torquing bolts to the right setting actually stitches the bolt slightly and they stretch gives the right amount of clamping force. Too much and the bolt integrity is compromised, too little and the item may come loose with vibrations and so forth.
@JosephcallsmeNolan 4 жыл бұрын
Thanks guys.. Got it
@johnlawton5534 4 жыл бұрын
Scotty, what happened to continuity, Episode 1 of the Barra rebuild your Valiant wagon was on the hoist. Yet today (episode 2) it's gone! I thought you took it home some weeks ago, yes??????
@STREETMACHINETV 4 жыл бұрын
Shit takes time to do
@nickslayer4368 3 жыл бұрын
It would be very rare to get an embolism by just blowing compressed air on your skin, however if you have a cut opening in the skin it could be a danger. The biggest hazard is with people cleaning things using compressed air, small bits of particles or metal shavings can blow back into your face and eyes at a pretty hefty rate.
@1977jelliott 2 жыл бұрын
You only need a tiny cut to get air under your skin, trust me, I once had a finger blown up like a balloon while blowing off a handful of bolts.
@howey1975 4 жыл бұрын
I'm struggling with the old plugs. I just think it's false economy. All it needs is one to play up and you'll be chasing a gremlin for an hour or more. Especially using untried coils on an untried, used motor.
@STREETMACHINETV 4 жыл бұрын
Yeah, it turned out to be a dumb move
@justanotherguy9664 4 жыл бұрын
@@STREETMACHINETV What happened...? Did it toast a coil, or was it misfiring...?
@jimclarke1108 4 жыл бұрын
Come on Scotty be honest. You have done it before ))
@gavinb9627 4 жыл бұрын
Maybe once or twice but that's all he swears
@jimclarke1108 4 жыл бұрын
@@gavinb9627 He swears alot ))
@xbenxwilsonxhighlights7879 4 жыл бұрын
If someone asks about the gasket remover 3000 in the comments I guna lose my shit
@DodgyBrothersEngineering 4 жыл бұрын
Sump mod looks much better than V1.
@deveous_dave 4 жыл бұрын
No assembly lube, going in dry Scotty?
@STREETMACHINETV 4 жыл бұрын
There was lube involved, the editor skipped a couple bits
@mangomcpoo475 4 жыл бұрын
Again with the bloody music!
@dzl_trq9362 4 жыл бұрын
Where do you buy the midget that hands you tools through the part your working on? 🤔 like the one in your sump 😂
@clint.garage.6092 4 жыл бұрын
Can anyone hand off max performance ?
@STREETMACHINETV 4 жыл бұрын
??
@RICHOWASP 4 жыл бұрын
is this going in the taxi ?
@STREETMACHINETV 4 жыл бұрын
MX5 but we're doing an almost identical one for the Taxi
@5UPRAH 4 жыл бұрын
Oh god - please don't use an uggadugga on the cam cap bolts!
@STREETMACHINETV 4 жыл бұрын
We didn't ugga them, we just ised the little gun to wind them down
@janeblogs324 4 жыл бұрын
3:20 oi shutup, I can't hear the music... Said no one ever
@MichealAEdwards 4 жыл бұрын
Any chance you could reload this video with the music set at an appropriate level, or better still no music its a car vid not a disco
@justanotherguy9664 4 жыл бұрын
am sure you are sick of the music comments. But, umm, yeah....
@STREETMACHINETV 4 жыл бұрын
The editor has been publicly flogged and has taken the comments on board
STREETMACHINETV
Рет қаралды 53 М.
Erdes Cars
Рет қаралды 9 МЛН
Thoy Chomnan
Рет қаралды 12 МЛН