Awesome, glad the video helped you out! :-D

Same this guy just saved my soul from exploding

exCt same rhing happened to me bruh appreciate this man

Awesome, glad it was helpful! :D

Glad it helped!

Thank you very much for the kind words, nice to know the video still holds up after a couple of years :-D

Always happy when someone's helped by my videos :-)

Many thanks for your thanks! :-D Always makes me happy when my videos help someone!

Great, happy the video helped you out :-)

Noice :-D

No problem :)

Thanks for the feedback man. Glad you got help from it. I am pretty pleased with the way I was able to put the hammer housing back together :D

Thank you very much. If I had 100% free time and $1,000,000,000 USD I would buy all GBB guns/rifles and do videos all day :-p Sadly, I don't have a billion dollars :-(

@@CJAwesome83 I think we all wish to have that haha. Atleast youre doing a great job with the stuff you have right now :)

Awesome, always makes me happy when my videos help someone out! I have heard about "airsoft" in Australia and I really feel for you man, no access to real fire arms or even decent looking and functioning replicas :-| That's rough!

@@CJAwesome83 Thank you too. I buy a lottery ticket a few times each year and if I ever won my intention is to pack up and move to Arizona which has a lot going for it (especially good laws in favour of Sporting Shooters).

Cool, glad you found the video helpful :)

Thank you for the kind comment :-)

Thanks! Glad you got helped by the video :-)

Glad it helped!

Thanks for the comment! Always happy when my videos are helpful :-)

Awesome! Glad you were helped by the video :-)

Awesome, glad to hear it. Always happy to help :-)

Always happy to help :-)

Awesome, always happy when this helps someone :)

Thanks for the feedback man! Make sure to share this video so other's don't have to suffer like you did ;-)

Thank you :-)

Awesome, glad the video helped you out! :-)

Yeah the Stark is a little bit different actually. Perhaps I should do a video like this for my stock SA Glock 19 before I sell it :-D

Maybe you should. I might be interested in purchasing it from you.

Ah. Yah know what the problem is shipping, handling and customs which makes it very difficult to give you a decent price on it so I prefer domestic sales as my first route. But if you really want it I am open for that as well.

Glad it helped!

No problem man! Glad you found the video helpful! :-D

How good is the action hammer bearing? Doesn't have any issues til now?

You're welcome!

Glad it helped :-)

+Tony Jespersen Glad you found it useful :D

You're welcome! :D

You're welcome. Glad you found it useful :D

You're welcome :)

You're welcome :-)

Thanks :D

Thanks man. Glad you got help from the video :)

No problem!

:D

No problem man! :D

Awesome! :D

For WE OEM parts check out KY Airsoft: www.kyairsoft.com/ Direct replacement part: www.kyairsoft.com/parts/we-pistols-gbbp/g-series/g-g-22-semi-gbbp.html

Yes, that is an issue. The valve reset knocker resets the valve knocker and closes the gas flow when the slide blows back. You need to replace it!

Could be that your valve knocker is worn or broken and not striking the magazine valve fully which would explain why an upgraded hammer spring did not solve the issue.

No.

@@CJAwesome83 maybe the umarex will fit

Yes they can

Hrmmm. Not too good with those specific issues but yeah, sounds like you should try a softer hammer spring in it. Because when the pistol fires and it blows back, if it does not have enough force to blow the slide all the way back it will not trip the valve reset knocker which will leave the magazine valve open and vent all the gas. You could also possibly try a weaker recoil spring but that will impact the overall feel and snappiness of the pistol so that would be my second choice.

the spring won't stay in place

Sorry, I don't have an M&P at the moment.

What you are asking for is covered in the video you made this comment on :p

Don't think you can test that theory without extra parts. However, one other thing it could be is a worn magazine catch, meaning the magazine is not seating fully up against the nozzle, meaning too much gas escapes when firing, and not being powerful enough to cycle the slide fully. Try gently pushing the magazine up in the frame when firing and see if that helps, if yes, you need a new magazine catch button.

@@CJAwesome83 I finally found my issue, I use a aps nozzle with the DP light weight bbu because its looser inside the bbu removing a point of wear that used to mess up my cycling for a long time when I had a GA nozzle and it works perfect with the Poseidon ice pix ice breaker piston head and flute valve setup I have but there’s one thing, it uses a single pin to hold the flute valve in rather then the regular nozzle setup. I ended up finding it have become loose and the flute valve no longer fully closed. I glued it with a tiny drop of jbweld and it all worked again!! Also yes the mag is seating nicely for now but thanks for the heads up when it will happen! Glad my Glock works!

No. The WE magazines are not cut on the right hand side to allow for a reversed magazine release to work.

If you just assembled the frame and not put the slide on, press down on the two tabs on each side of the trigger housing to reset the trigger/hammer. I.e. push down the trigger bar tab and the valve reset knocker tab.

+Generation Nuke No problem man! Glad it was helpful! Do you mean the spring between the trigger bar and the inside frame, or which spring?

Yes that one, so i can feel more resistance and it snaps back faster. got the WE G17 Force so trigger travel is already short but the reset is not that great. Sometimes i have to help it (user error on the spring caused this)

+Generation Nuke I see. Then the answer is No-ish... :p There are "reinforced" spring kits for the TM/WE Glocks that have that spring but I doubt they will give you what you are looking for. Sorry.

+Non Existent no-ish... guess that means modification time

You're welcome :D

Take a break, step away from the parts. Do something else and come back to it and try it again :-)

+Zhehan Xiong Actually it is. I got it with full markings from KIC Taiwan. It's the "HK3P" version of the WE Glock 19, with full markings.

Thanks for the info, I totally forgot about this info. Just another quick question. For your Stark Arms G19, Do u have the problem that the slide doesn't lock back for empty chamber when using WE mags? Love your videos, keep up the good work!

+Zhehan Xiong Haven't tried my WE Glock 19 magazines in the stark very much to be honest. I have plently Stark Glock 19 magazines for my Stark :p

没问题 :-D

Thanks man! :D Yep, I recommend Rainbow8 for upgrades for KJW Glocks : www.rainbow8.com/

Sorry I do not understand :(

Sorry to hear that man. I have the opposite as you can tell, multiple commenters have referred to me as "bitch hands" :-p Take your time and go slow.

@@CJAwesome83 yeh I had finally found a very unconventional way of doing this step by putting it on a table at a certain angle and forcing it in with body wait. I remember it was a painful ordeal.

Awesome! :-D

@@CJAwesome83 oh dude, that was a painful experience, I think because my block is new , the spring was very tight and the part is a tiny bit different. I just couldn’t hold it there under pressure with my fat fingers. So I finally worked out that if I got it kind of in place then flip it up side down on a table and put a screw driver on top of that part, I could then push down on it with more pressure. I was so happy once I had it in there. Thanks for your tutorial mate, it helped a lot and would have been impossible if I had to include that center part at the same time.