CNC Chucker Lathe Demonstration
Рет қаралды 12,221
6 жыл бұрынwww.sherlineipd.com/chucker_l...
This video features our CNC Chucker Lathe with ball screws. The materials being turned are 1/2" diameter 12L14 Steel and 7/16" diameter 303 Stainless Steel.
@sriramkumar9577 3 жыл бұрын
Very very impressive. Let the lock down, and the bad times, disappear like bad dreams. I will definitely place my hands on this.
@gwheyduke 2 жыл бұрын
I need to get one of those!
@nigelft 5 жыл бұрын
Dumb question is dumb, but how did you attach the accordion protection over the screw ...?
@SherlineProducts 5 жыл бұрын
Here is a link to our Accordion Way Cover Installation video: kzfaq.info/get/bejne/j9F6YNOT0Ju2iHk.html
@nigelft 5 жыл бұрын
Sherline Products Many thanks 😊
@PanamaSticks 3 жыл бұрын
Am I correct in assuming that ecause the turret shifts left and right, instead of rotating to the next tool, you are very limited in the size of the work you can do?.
@SherlineProducts 3 жыл бұрын
The part size is dictated first and foremost by the swing over the crosslide, which is 1.875" (47.6mm). If you would like more details about the capabilities and size of materials you can use with the chucker lathe, contact us at marketing@sherline.com.
@mmpiforall5913 3 жыл бұрын
If you plan the order of operation, tool sizes and extension from holders correctly, you can turn larger parts. For example, in job I ran a while back, I set up 2 cut-off tools, one short to start and one long to finish and part off 3" parts on MY modified machine.
@andreanderson426 6 жыл бұрын
What Cnc program is that? doesnt look like Mach3
@SherlineProducts 6 жыл бұрын
Metal Dawg is correct. It is LinuxCNC.
@jasondevault5066 4 жыл бұрын
5:52 you'd better get some oil on it!
@jarisipilainen3875 5 жыл бұрын
8:45 those price tools should be included. i could buy cheapest models and do my own machine lol
@rajivchudasama3402 4 жыл бұрын
Repeed wary slow
HFC Shorts
Рет қаралды 19 МЛН
Alva Welding
Рет қаралды 339 М.
Клуб DNS
Рет қаралды 485 М.
FISPECKT
Рет қаралды 210 М.