DIY How to fix ram

Рет қаралды 102,288

6 жыл бұрын

Motherboard Test Card Diagnostic Cards : goo.gl/Lzp5E4
music 1 : goo.gl/6Rfb3T
2 : goo.gl/xv9h31
If you have any questions leave it in the comment I will try to answer it
My Second Channel : bit.ly/3ec14vD
FaceBook : bit.ly/2WSnrxw
Instagram : / hardwareboy0
For Business Only : hardwareboy0@gmail.com

Пікірлер: 45

@rich6245 3 жыл бұрын

The way you're handling and storing your ram modules I'm not surprised you have so many broken modules. I'm surprised any work for you. If you just inspect them with a magnifier x30 (jewellers loop) you will probably find you have knocked off or cracked some of the critical tiny surface mount devices. Others will have just been zapped by static as I can't see you taking any anti-static precautions.

@Okhan97 Ай бұрын

Static won't kill your ram bro, check the video of linus with electroboom

@abderraoufazzouz7226 6 жыл бұрын

Really interesting video, Hope see more videos from you. Good luck.

@raul.moisee 4 жыл бұрын

i just cleaned the stick cip and it worked! thank’s man!

@5dful 4 жыл бұрын

what was the temperature used?

@hn1512 3 жыл бұрын

crap my ram blasted like popcorn

@joshuanzala7542 5 жыл бұрын

what is the device (blinker) you are using to check the ram sticks

@soundermax8091 5 жыл бұрын

Look at description

@Kyle-ye4nj 5 жыл бұрын

It makes sense to put flux and heat up the boards indeed, but it is unlikely to fix any board.

@sagarsanodiya6576 3 жыл бұрын

4863NG mosfet nhi mil rha h to aap koi substitute bta sakte h iska??

@tuxnoel 3 жыл бұрын

What was the contraption with 18650 you made ?

@SerenoOunce Жыл бұрын

He attached a phone vibrator to the PCB holder. The micro-vibrations simulate bumping the IC with tweezers during the reflow.

@kawswhlyakawshlya4245 4 жыл бұрын

nice GOB

@tossancuyota7848 Жыл бұрын

now inject a direct voltage them broken ram to see which one is shorted

@kamsok6132 2 жыл бұрын

cleaning and reflowing solder joints how often does it succeed?

@SerenoOunce Жыл бұрын

RAM modules generate very little heat, and heatsinks are really just for aesthetics. Reflowing a RAM IC is a waste of time and very likely to just make things worse. This would work on the old XBOX 360's bc RAM was directly on the mainboard, thermal stress would crack the solder joints. Not an issue for a RAM module.

@shiftctrlhack 4 ай бұрын

@SerenoOunce - He is correct. This is a waste of time and don't attempt this on a actual new stick's that are worth money. Send them to a professional to diagnose the problem instead of cooking all the memory ic's and rendering the entire stick junk when it could be as simple and 1 capacitor shorted to ground heating up that can be seen on a thermal cam, I just repaired 1 stick of CORSAIR 32GB DDR5 6400MHZ PLAT and if the customer did this crap before bringing it to me the whole thing would be destroyed and wasted.

@thetalentsupporter7436 5 жыл бұрын

What did u apply on the chips before heating, where can I get it from??

@princeantony7200 5 жыл бұрын

That is "flex" you can buy from local electronic Shop

@stopthemadness5477 5 жыл бұрын

Don't confuse him, it's liquid flux for SMD re-work - used with hot air re-work station for removing and re-mounting surface mounted components

@Kyle-ye4nj 5 жыл бұрын

It's flux, make sure you don't get a flux made with "acid" (those may damage the connections over time).

@bennybouken 5 жыл бұрын

You can also use your clothing iron I've tried with my broken 4gb stick and it worked I did the same method with my broken GTX 460

@daniellee6912 5 жыл бұрын

it's only a temporary fix though, you need to reball the gpu chip

@Kyle-ye4nj 5 жыл бұрын

@@daniellee6912 Wait, why temporary? Won't it be a permanent fix as long as the GPU doesn't heat up too much?

@shubhambhanot5547 4 жыл бұрын

Can u plz tell me how sis u use clothing iron

@saifulali3236 Жыл бұрын

Menginspirasi

@SameerContentHub Жыл бұрын

nice prank!!!!!!!!

@sumday32 5 жыл бұрын

may be there is short capasitor

@j-man6001 5 жыл бұрын

yeah thats what I think the culprit is on both my DDR3 PCL-12800 sticks, they get super hot, leading me to a short somewhere

@SevenDeMagnus 3 жыл бұрын

Hi. Thanks. How many Celsius is the heat? Thanks. God bless, Rev. 21:4

@hussssshie 5 жыл бұрын

Completely neglected to follow any temperature profile... Any fix won't last.

@frpme4847 4 жыл бұрын

Hello can u give me diagnostic error codes guide or something ?

@abhiabhi8075 4 жыл бұрын

Leave all 4 + 3=7 in safe Place and Extract gold from rest of them🤣😋

@kandisantoshkumar663 4 жыл бұрын

U have DDR2 ram bro

@subhan1641 4 жыл бұрын

why does my ram not work anymore after a power outage?

@tu_pai Жыл бұрын

u need avr. got to do with power surge or something

@doodleydude7833 4 жыл бұрын

click bait

@user-fi9jb8md8y 2 жыл бұрын

That was a big wasting of time