Step by step instructions on how to remove and replace the driver's side motor mount on a 2014 Chevy Suburban.
Пікірлер: 19
@drew599210 ай бұрын
30-45 min job God hear you because I’m about to do this job soon and I’m dreading it. Lol
@txangler Жыл бұрын
Ok, I did it this way. 6 hours, two bleeding arms and a new motor mount with NO heat shield is the end result. I don't know how you got the new one in with the heat shield, but kudos to you.
@tothepoint42408 ай бұрын
Yo, thank you for this. This clip had all the answers I had questions about. 🙏
@gabrieltrevino79446 ай бұрын
Thank you 🙏🏽
@coleshannon83657 ай бұрын
Great video! do you have a video for the passenger side mount?
@showmemechanics7 ай бұрын
No but if you remove the starter and the dipstick tube, it'll slide out the same way.
@tonyanderson84974 ай бұрын
Another option is dropping the front diff which takes 20 minutes then you got tons of room underneath
@stevenfree29882 ай бұрын
Do you get the new engine mount in without cussing and throwing tools? Getting it out was the easy part
@DSNCB919 Жыл бұрын
Yeah i told dealer to hold up before i let them do it.. then i watched this.. it was easier on my 2010 cadillac dts.. they can have at it 😂
@farmermiyagi13389 ай бұрын
So much easier if you yank the inner fender well. 5 minutes and you can see everything you're working on.
@albertoanaya16694 ай бұрын
Is this a 4x4? About to.do mine but does not look this easy
@showmemechanics4 ай бұрын
Yes, same concept.
@blackhouse7646 Жыл бұрын
What is the torque spec for everything? Also, is the passenger as hard?
@showmemechanics Жыл бұрын
Engine mount to engine bolts are 37 ft lbs. Engine mount to frame bolts are 48 ft lbs. And for the passenger side the exhaust manifold has to come off.
@pabloescobar7802 Жыл бұрын
I keep thinking one day they will make motor mounts that actually do what they are supposed to do .. mount the motor ...
@showmemechanics Жыл бұрын
Agreed
@napieraustin Жыл бұрын
Well, you can’t just bolt straight to the frame. They have to have the rubber in there to dampen the vibration , which is what fails. What do you expect?
@showmemechanics Жыл бұрын
Agreed, even worse are the new oil charged ones. Garbage