Thanks!

No calibration, just install back and work.

@@therealxander01 merci pour l info 👍

hi, no just turn down the starter key.

​@@therealxander01thank you

Hello, What you want to check? Easiest If you wanna see the valve working just pop up the plastic cover and start the engine, and you can see the valve moving or not.

Hello, What you want to check? Easiest If you wanna see the valve working just pop up the plastic cover and start the engine and you can see the valve moving or not.

It's a how to video, to show you how... doesn't mean the car needed it, just needed a car to show you how.

Hi, i do not know because my car not include the b60 valve.

Hi, sorry but I dont have OM 651 engine car, but w202 has om611 engine similar OM 646

@@therealxander01 you have the better engine

@@therealxander01 keep your car as long as you can

Hi, I make maintenance cleaning once a year. Avoid future problem.

I did it to my Mercedes’ that couldn’t pass the smog check for problems with the catalytic code p0420 I cleaned the valve internally It was full of carbon also I added it a CRC brand carburetor and intake cleaner to the opening where the EGR valve is installed let it soak for 30 minutes then I turned on the engine rev about 5 times and guest what : a lot a lot of carbon came off then I reassemble the valve and the check engine turned off by itself car runs super smooth finally I passed the smog check. Note: I did it twice because I have 2 EGR valves in my Mercedes’. The EGR valve is easy to tested if it good or not using a vacuum gauge that you can rent it in any auto parts

Yes

Yes

nous apprendre à la supprimer mécaniquement SVP

@@victorwiaderek2827 hi, what?

@@THEXANDERMUSIC i am french an engeneer why cleaning the best is to remove it

show us how to remove it that is best instead of cleaning a baby can make this

i can show you if you cannot

What do you mean ?

@therealxander01 What is the product called you used to clean the EGR?

@@mohamedanbi5013 hi, just brake cleaner, nothing special.

Hi, heat up the engine, use hand glove and try turn the egr left and right.

Mine is Stuck but moved slightly to the left when I gave it a knock , will try again with some more effort , put a sling round it and prise it up to release it.

Loosen the bolts a few turns and hit the gas, it will pop out eventually 👍

@@ScreaminOwl Didn't work had to chisel it until it stated turning and had to keep hitting it back and forth until it eventually came loose. Had to get a new one.

Keep the bolts connected slightly, before removing turn engine and and give some revs will release the pressure then. This is what I did first time and worked.