ELEGOO NEPTUNE 4 WITH KLIPPER

ELEGOO NEPTUNE 4 WITH KLIPPER - FOR ONLY $259

Рет қаралды 18,742

Күн бұрын

#elegoo #3dprinting #pcbway
PCBWay: www.pcbway.com/
To Purchase - shareasale.com/r.cfm?b=168032...
Is this the best budget Klipper 3D Printer? It is only $259 at the release of this video! What do you get for the price?
Profit 3D Filament -
www.profit3d.com/?AffId=2
IPHONE HOLDER -
/ posts
Clearance and Tolerance 3D Printer Gauge -
www.makersmuse.com/clearance-...
Boring Calibration Cube -
thangs.com/designer/tripodsga...
The ‪@ElegooOfficial‬ Neptune 4 #cheap3dprinter #3dprinter
Comes pre-installed with Klipper firmware, with an ARM 64-bit 1.5G main frequency quad-core processor for faster command processing and execution, enabling it to print at an impressive speed of up to 500mm/s for higher efficiency. 8G RAM provides ample storage space for fast printing.
Additionally, the printer supports advanced features such as input shaping, which reduces mechanical vibrations in the printer's motion system and artifacts such as ringing, rippling, ghosting, or echoing on the printed model surface. The pressure advance function adjusts material flow according to printing speed, ensuring consistent pressure in the nozzle and reducing filament ooze or blobbing.
ELEGOO Neptune 4 FDM 3D Printer with Up to 500mm/s High-Speed, 121-Point Auto Bed Leveling, 300℃ Dual-Gear Direct Extruder, Printing Size of 225x225x265mm³ /8.85x8.85x10.43 Inches
Pre-installed Klipper Firmware】With a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core high-performance processor, ELEGOO Neptune 4 can achieve printing speed of up to 500mm/s (recommended 250mm/s), allowing you to produce your models faster than ever before, support input shaping and pressure advance function to improve the print quality of models.
【Dual-Gear Direct Extruder】The new self-developed dual-gear direct drive extruder with a 5.2:1 reduction ratio ensures powerful extrusion and smoother filament feeding. Paired with copper-titanium all-metal throat pipe and unique air duct design to effectively improve the heat dissipation of the throat pipe and reduce nozzle blockage risk.
【300°C High-temp Nozzle】With a 300°C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon.
【Auto Bed Leveling】The 121 (11x11) points auto bed leveling ensures quick and accurate leveling of the build platform. For perfect first-layer printing, you can also use the hand-twist knobs under the build platform for auxiliary leveling. In addition, the PEI magnetic platform allows for the easy printed models removal with just a slight bend.
【Efficient & Instant Cooling】The 2 thickened double-sided 4015 model cooling fans with strong wind for more comprehensive and efficient heat dissipation, along with the 4x4020 ball bearing blower fans behind the print head to quickly cool down the newly deposited model, ensuring good print quality even at very fast printing speed.
【Removable Capacitive Touchscreen】The 4.3-inch removable capacitive touchscreen can be operated by hand-held or fixed on the base, and features a model preview function and pause printing function for added convenience. The gantry's LED light strip with 30 beads and a hood, combined with an LED light on the nozzle for observing the model printing in a dark environment.
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
/ tripodsgarage
/ tripodsgarage
/ tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, @Creality3D silent board, silent board, BIRGTREETECH, SKR CR6V1.0, #Artillery Hornet, Artillery Genius, #Kywoo Tycoon Slim, #Ender5Plus #CR6SE, #FLSUN #SR #Superracer, Bondtech #FOKOOS #ODIN-5-f3 #3DPrinter #3DPrinting longerlk5pro longer3dprinter #LK5PRO 3D Printer Ender 3 Max, Creality Ender 3 Max Neo, Sovol SV01 Pro, #creality #Neptune4 #budget3DPrinter

Пікірлер: 109

@B1GJano Жыл бұрын

great video! Love the thorough explanation of the prints and specs! Keep up the great work!

@TripodsGarage Жыл бұрын

Thanks Jano! Much appreciated 👍

@CoolestUserEver 11 ай бұрын

Nice review, thanks. I got mine still in the box, can't wait to unpack it. From other tests, I've seen that the usb should accommodate a multi usb dongle and allow both a camera and wifi to be plugged at the same time. Something worth mentioning is that the pro has a drawback that even Elegoo forgot to mention, the metal rods need to be cleaned and greased regularly to avoid quality loss or unexpected wear. I guess this might be even a bigger issue for casual users since the printer is likely to stay unused and collect dust for longer periods of time. Glad I went for the regular since that's my profile!

@buildersmark Жыл бұрын

Great review!! The tolerance test is impressive. You can see that the 0.1 is very close & could release.

@TripodsGarage Жыл бұрын

The tolerance is impressive! I close to breaking the 0.1, so I left it 😆

@stevenpoole1968 Жыл бұрын

another great review , also love the new look of the garage

@TripodsGarage Жыл бұрын

Thanks Steven! The garage still needs some work, and a lot of cleanup 😉

@alw1981 Жыл бұрын

Excellent review! I really enjoy the new format.

@TripodsGarage Жыл бұрын

Great to hear the feedback. I had some terrible acid reflux during that taping 😂. Not used to being on camera that long.

@thelightspeed3d712 Жыл бұрын

The best review yet John. Seriously

@TripodsGarage Жыл бұрын

Many thanks Steve! I really appreciate it

@3DPUK-TECH-CHANNEL Жыл бұрын

Great review

@TripodsGarage Жыл бұрын

Many thanks bud!

@stldenise Жыл бұрын

Excellent point on the giant fan! Seems like there's no perfect place for these things.

@TripodsGarage Жыл бұрын

Unfortunately if you want the faster printing, you are going to need more fans. Compared to the SV07, the curtain fan on the Neptune 4 is a welcoming site 👍

@XxStolliexX 8 ай бұрын

I dig it - as I delve deeper into this I'm thinking about a second printer already lol - higher print speeds would be nice. I like my instant gratification lol

@TheMarkobocvarov 8 ай бұрын

Bought this printer im having some issues with the z axys left side botom wheel is super lose no matter how much i twist the centrical nut doesn't do much anyone know how i can properly setup the z axys with the 4 screws ty.

@lucase764 Жыл бұрын

Keep up the good work!

@TripodsGarage Жыл бұрын

Thanks! Will do 👍

@PeterAgostiniJdcap26 9 ай бұрын

Can you use this printer with out loading all that software ? Just put sliced files on a usb and print? Ty

@Firstleaker Жыл бұрын

Wow! You didn’t skip a beat! Was worried that you were going to do what Future Tripod mentioned 😂. Had a good flow, and very detailed, unlike others that just crank out videos. Well done 👍. Oh, perfectly timed with the first KZfaq card 😂😂

@TripodsGarage Жыл бұрын

There are still more changes to come!

@papapowertoday Жыл бұрын

Mr. Tripod. Nice honest review.. .

@hamradiohack 4 ай бұрын

Very tempted to buy this. I dont know if its going to be better than my ender 3 v3 se ? Seems like speeds over 200 are kinda bad on machines without the triangle support. My ender shakes and wobbles 😮😂 the ke a 500, forget it. No way, you would need input shaping.

@evilbanaan 10 ай бұрын

I have never worked with 3D printers, but would like to buy one to make router templates for my woodshop. How precise are prints? What terminology should I look for? Tolerance? Thanks in advance!

@Doile911 10 ай бұрын

I have a neptune 4 pro, so far i am satisfied, altough, if you print large prints (for ex 200mm dia) then the dual bed heater really messes u up, you cant print higher than 150mm/s without finetuning

@blutadlerx 11 ай бұрын

Got Mine today. Paniced, when the Nozzle was alreday cloged when I tried to Run fillament through it and wondered wtf is Happening hahaha Other than that, its super awesome. And extremely quiet without the big fan

@jasim.mu7 8 ай бұрын

Elegoo Neptune 4 pro vs Ender 3 S1 pro. Which one to go for a beginner?

@deciver5 9 ай бұрын

I wanted to order one but it was unavailable in EU all the time... So I have decided to go for Sovol 07plus which was available on premiere day. And it was a very good decision. Printing all the time with PETG and no problems at all and the prints look awesome. And it was only 309$ for early birds for a plus size printer (304x304x350). And it has a wifi which runs smootly without any problems out of the box. There are some cons of course - it goes with old custom cura 5.0 and You need to export the profiles by hand to prusa or new cura,the rolls on Y axis wear quite fast if printing/traveling on 250mm/s + speeds and fan is super loud but I use it on 15% on Petg so it does not bother me at all . Haven't try elegoos Neptune4 ( I use their mars series printers and they are awesome) but sovol might be quite a competitor for a printer of the year title.

@woodwaker1 Жыл бұрын

John, Off topic but I think a great video would be combining 3D printing and laser cutting. I have been slowly learning Lighburn, and am surprised how easy it is to take some of the objects to be cut on the laser and import them to Tinkercad and then export as a STL, or even slightly modify them and then 3D print. I know you are big in both areas - would be a great combination.

@TripodsGarage Жыл бұрын

That would make a great video! Thanks for the suggestion 👍

@kennedysamarakody4925 9 ай бұрын

Would this be a ideal printer for making cosplay props? Like helmets? Etc

@s.leegooding1827 10 ай бұрын

What is the max acceleration it can handle?

@beav1962 4 ай бұрын

It's $229 now on the Elegoo site, with free shipping. I would probably have fun with it for a while but I wonder for how long.

@rabbitrampage 11 ай бұрын

Have you had any issues with the z axis? A good few printers seem to have developed faulty z's where it doesnt raise the nozzle and drives it into the bed, or into prints mid-print.

@TripodsGarage 11 ай бұрын

So far no issues. And I hate bed crashes and ghost printing 😂

@leeball4 10 ай бұрын

I keep hearing KZfaqrs placing fan noise as a 'Con' on reviews of high speed printers and I don't understand it. It's not a 'Con" as in it's poor product design it's really just a fact of life. There are trade-offs when it comes to engineering a product, in the case of 3D printers you trade sound levels for speed. It's a really good trade to make in this case because you get a very significant bump in speed for a less significant bump in sound with excellent resultant quality. It's kind of like complaining about the rain.

@TripodsGarage 10 ай бұрын

Yep! You cannot have it both ways. It is only worth noting if people need a more silent printer. However, it can be silent, just print slower so the curtain blower is needed.

@chrismba777 6 ай бұрын

For Wi-Fi, just buy a $30 Wi-Fi range extender with an Ethernet port attached. I do so for my Sony TV in my living room, which has an ethernet port (and a crappy WI-FI adapter), works great to connect directly to the home network at much faster and consistent speeds.

@3DHP Жыл бұрын

Great video Tripod

@TripodsGarage Жыл бұрын

Thanks Jerry!

@goboyz8016 8 ай бұрын

NOTICE your Z lead screw mounts (where the lead screw goes through the mount) are loose which will cause print issues (At exactly 4:33 in video) The lock screws are almost off and I bet the screws themselves are loose). You will need a 5.5 flex nut driver to tighten them easily. I found this and once I tightened them and cleaned the rails my Neptune PRO 4 is rock solid and prints like a dream. I love this printer. The pre shipment inspection sucks as I found many loose screws and once everything was tight I found this printer to be AWESOME. I bet these loose screws are the cause of MOST problems.

@Ojref1 8 ай бұрын

Got a Neptune 4 Pro from Elegoo direct. Its a refurbished unit, they occasionally get a few back that they resell for a bit less. I thought of it as a good way to learn Klipper on something that is already set up and running, as I'm looking to deploy about 6 Vorons next year and Klipperize a few old deltas. Its definitely an Ender 3/V2 replacement. Don't upgrade the Ender. I recommend the pro version because of the linear rods and metal vslot wheels. You will never come out on upgrading the ender because the Elegoo comes with all the goodies for the same base price. Now, if they can get a little better with slicer profile support and not worry about repackaging an old version of Cura, they'll take that marketshare from Creality.

@woodwaker1 Жыл бұрын

John - agree with the lack of Wifi, but for the price it looks like a great entry level printer. Any option to load files other than a micro SD card is a big plus

@TripodsGarage Жыл бұрын

I was struggling to find anything negative for its price! You simply cannot have it all for only $259. I believe this is a perfect starter printer.

@edenassos 11 ай бұрын

@@TripodsGarage Don't get the big deal, just get a wifi extender, connect to your wifi with it and then connect the extender to the printer via LAN cable. Works as easy as abc.

@K3NnY_G Жыл бұрын

Thinking of replacing my Sidewinder X1 I've done a bunch of work on with one of these; you think this is a viable replacement to do less tinkering?

@TripodsGarage 11 ай бұрын

Overall I believe the Neptune 4 is a better machine. However, it does have a smaller build volume than the X1

@K3NnY_G 11 ай бұрын

@@TripodsGarage I'm not really concerned about the smaller build plate, got my X1 just because the price was right; I don't do any real models, mostly RC parts or household stuff so quality and speed, along with being able to print slightly higher temp material reliably is kinda what I'm hoping for. It was also kinda a battle getting octopi working reliably, never had Klipper before but apparently that whole side of things usually just works.

@phoebus00 11 ай бұрын

Hi! Great informative vid. I’m dying to pull the trigger on buying this. Can you please tell me what the footprint of the printer is without the display and the holder? I have a small bedside table and want to make sure it fits on it.

@TripodsGarage 11 ай бұрын

The base is 13.25sq. However, depth is 17.5 from belt tensioner to stepper motor. With the bed all the way forward and back you are looking at about 19 inches needed for clearance

@phoebus00 11 ай бұрын

Thank you! Seems I'm might have to wait for a mini :( @@TripodsGarage

@Gryfang451 11 ай бұрын

Thanks for an honest review of both the Neptune 4 and the SV07. I have an old Sovol SV01 that I've modded out of necessity (fixing issues and improving where possible), and was considering the SV07. After your video for the Neptune 4, I'm looking at the 4 Pro as it's only $299 on pre-order.

@TripodsGarage 11 ай бұрын

Hello, even all reviews aside with the SV07. I just believe that the Neptune 4 just beats the SV07 in almost every category. There are three things that the SV07 has that the Neptune doesn't, a Kl;ipper Screen, WiFi, and independent Z's (off the top of my head). The Neptune 4 just seems more refined, and actually worked for me. Thanks for watching and commenting! Much appreciated!

@Gryfang451 11 ай бұрын

@@TripodsGarage The old SV01 has dual Z as well. Unfortunately they're connected to the same place on the board. Still, it seems to work ok. The only worry about the Neptune 4 I have is no accelerometer. Maybe you could answer that question though by plugging in the one for the SV07 into the Neptune or looking through the menu screen or Klipper to see if it has a section for it. I haven't dove into Klipper in anything yet

@rabbitrampage 11 ай бұрын

@@TripodsGarageThe SV07 also comes with an accelerometer for tuning input shaping, 12db quieter, Meanwell PSU, slightly larger volcano style hotend, and more nozzles on the market (none besides 0.4mm out for the Neptune 4 yet). I'm stuck between them myself at the moment. They're the same price and I'm tempted by the 07 as it's quieter, has better UI, WiFi out of the box, and less complaints about the firmware, although the Neptune seems to print faster and better, along with better customer support. The main thing keeping me away from elegoo besides the noise (my printer is on my desk with my pc), is the PSU quality. I got an elegoo robot kit years ago and it came with dodgy fake 18650 cells so I don't know how much I can trust their power supplies.

@yoyofargo 9 ай бұрын

I expect these to get even cheaper as the motherboard manufacturers integrate risc-v chips instead of arm.

@Dr.slender Жыл бұрын

hello friend , could you please recommend me the neptune 4 or the kobra 2?

@TripodsGarage Жыл бұрын

Hello, I would pick the Neptune for over the Kobra 2. I believe the Neptune 4 is a much better machine. Thanks

@Dr.slender Жыл бұрын

@@TripodsGarage thanks 😊

@soukronfpv 11 ай бұрын

@@TripodsGarage I wish I could have seen your review before buying the kobra 2. I will receive it tomorrow and will probably return it even before trying it.

@westinspace9286 Жыл бұрын

You can connect the LAN cable to a WiFi extender. The extender is connected wirelessly to the router and the 3d printer is connected with the cable to the extender. That works, I have done it because I had a similar problem.

@TripodsGarage Жыл бұрын

Absolutely! I definitely need some wifi extenders. However, I will most likely replace my router first, it is over 5yr old. For the review I just shared the wifi to the Ethernet port on my laptop.

@westinspace9286 Жыл бұрын

@@TripodsGarage That makes sense I just though I would let you know it works.

@TripodsGarage Жыл бұрын

@@westinspace9286 I totally appreciate your input! Thanks!

@YouTube_Nr.1 Жыл бұрын

You can also just use a usb wifi dongle and plug it into the usb port. If you need the usb port, just use a small usb hub. A lot of wifi dongles work with it.

@westinspace9286 Жыл бұрын

@@KZfaq_Nr.1 I saw someone having a lot of problems with that though. Rhey were only able to get a certain one to work even though the others should have been compatible. The extender is easier. But you definitely can do that.

@danjmc35 9 ай бұрын

Should I get this or the a1 mini

@TripodsGarage 9 ай бұрын

I don’t have the A1, yet I would probably go with the A1 over this printer

@everlastingmedia Жыл бұрын

Nice review!

@TripodsGarage Жыл бұрын

Thanks bud!

@gabeplays9441 9 ай бұрын

Does it come with klipper pre installed?

@davedempsey5282 8 ай бұрын

Yes, it's a printer that has klipper ingegrated. No Marlin.

@asw912608 Жыл бұрын

Would you buy this over the svol7?

@TripodsGarage Жыл бұрын

100% I would buy this over the SV07. My last 3D Printer review was the SV07 - kzfaq.info/get/bejne/d6lol9Vqr9mrpI0.htmlsi=S5uvUh_9hMJS7Ck9

@asw912608 Жыл бұрын

Sorry i went back on your videos and seen the last review. I understand the assignment lol

@TripodsGarage Жыл бұрын

@@asw912608 - Hey! No worries at all! I am not the biggest name out there, I don’t expect everyone to watch my videos. I appreciate your questions 👍

@asw912608 Жыл бұрын

@@TripodsGarage i just found your channel looking for reviews the fact you answered so fast i subscribed for ya... Thank you

@TripodsGarage Жыл бұрын

@@asw912608 - Thanks for the sun bud! I truly appreciate it! I try to respond to everyone when I can. Happy printing!

@TheZolon Жыл бұрын

And from a company that has been around for more than a year. Sadly, what I felt was the best budget starting printer, the company is falling apart. I might try to get my hands on one of these.

@YouTube_Nr.1 Жыл бұрын

Are you talking about Sovol?

@TheZolon Жыл бұрын

@@KZfaq_Nr.1 no. Starts with an F.

@YouTube_Nr.1 Жыл бұрын

@@TheZolon Ohh the mystery 😂

@TripodsGarage 11 ай бұрын

The company “folded” 😉

@jan9221 10 ай бұрын

Mmh poti for the big blower

@digiscream Жыл бұрын

See...if you'd asked me a week ago, I'd have agreed with you. I've had mine for four weeks, and I had three weeks of fantastic quality, ridiculously fast prints - I was over the moon. Then it developed a fault with the extruder and now it can't even get past the first couple of layers (throwing an obscure Klipper error that doesn't even exist in Google's index). The response from Elegoo? Complete radio silence. I've got loads of stuff that needs printing _soon_ so I've had to order a P1S, and this thing's just going to the shed.

@TripodsGarage Жыл бұрын

I would suggest returning it.

@OldCurmudgeon3DP Жыл бұрын

1st

@TripodsGarage Жыл бұрын

I 2nd your first 🤔. Many thanks 👍

@mez9300 Жыл бұрын

Am i the only one who has to use 100% volume on youtube AND my headphones to somewhat hear what he's saying?

@TripodsGarage Жыл бұрын

Just checked, odd that everything seems good on my Mac. Then switching to headphones on my phone, yeah I had to crank up the audio. I did audio balancing during editing like I always do. However, I am using a new AnkerWork wireless mic in this video. Looks like I will need to work more on the audio for the next video, my apologies.

@mez9300 Жыл бұрын

@@TripodsGarage All good man, im just leaving feedback incase no-one else tells you about it and I was watching on my PC via headphones

@stephenvieira7765 10 ай бұрын

Nope. Sounds the same as any other video to me.

@IbnBahtuta 9 ай бұрын

The fact that they are too cheap to add fully automatic bed leveling when Creality can include it on their sub £200 ender makes me inclined to ignore this one despite its speed. They are not the only 3d printer that can go to 500. They need to up their game.

@TripodsGarage 9 ай бұрын

At 2:30 into the video I do mention it has mesh bed leveling

@IbnBahtuta 9 ай бұрын

@@TripodsGaragefacepalm

@ThantiK Жыл бұрын

For $300 you can get an Artillery Sidewinder X2 with volcano, direct drive, 110v heated bed, dual belted Zs, oldham couplers on Zs, and a 310x310 build volume. About the only thing this has over it is the PEI sheet. Additionally, the Sidewinder uses an edge card connector on their XZ frame, and all of this stuff gets connected when you place it on top of the base of the machine. It's sad to see everyone jump all over "oh it's got klipper oh klipper klipper klipper". Klipper is just another firmware. Most of the people watching this either already have klipper on a better machine, or have no real idea what the hell Klipper is for. Most people just assume Klipper = FAST...but, let's be real here, at the speeds that bed slingers are running, Marlin isn't going to be any slower. So unless you LIKE diving into Linux, and futzing around with firmware, and trying new things, and staying on the super cutting edge and breaking things just to fix them over and over again, Klipper really doesn't do shit for anyone other than make manufacturers include a whole linux computer with their 3D printer to make it work. Oh, that on-board storage? It can corrupt. Firmware doesn't do that, and Klipper is Firmware mixed with a control system on the board. None of you people pushing klipper klipper klipper ever explain these nuances to your viewers and I suspect it's going to cause a lot of frustration for people who aren't interested in 3D printing as a hobby, but just want to use the printer to print things.

@YouTube_Nr.1 Жыл бұрын

The web interface of Klipper is something everybody can make use of. And the more you know, the more possibilities you have, but as you can still use the standard touchscreen, you don’t need to, if you don’t want to. I will still give the printer you mentioned a look 😊.

@TripodsGarage Жыл бұрын

I don't mind a troll or rant. I have the Artillery Sidewinder X2, and it is a good machine. It has a 300x300x400 build volume advertised, not 310. I like my SX2. However, the ribbon cables have failed on me twice, and having the permanent glass bed is an issue. Yes, Klipper is just another firmware. Both Marlin and Klipper have their positives and negatives I am not here to have say which is better. However, you failed to mention, to get any of the features that Klipper has on a machine running Marlin, you will need to get something like Octoprint running on a PI or another computer. I never said Klipper was cutting edge. I compared it to the Neptune 3, and what made it different. Where am I pushing Klipper? I mention that it is running Kipper. I never say that Klipper is better than Marlin. As mentioned in the video, people can use this basically as a Neptune 3. Slice the file, save to USB or SD card and hit print off the display. Do you use onboard storage with computers? Can they get corrupt? I bet you have a cell phone with onboard storage, running an OS? Where is that in your comment? What Marlin and Klipper does, it gives people a choice. Clearly your choice isn't Klipper. As for me, I run both. I bet if I watch other videos, and read the comments, your comment will not be there. Yet, you pass this judgement on me. Most people want choices, and with choices it drives innovation.

@YouTube_Nr.1 Жыл бұрын

@@TripodsGarage Also, from what I have heard Elegoo works quite well out of the box. The artillery x2 not so much (plastic feeding parts for filament) and is a bit old. It’s normal that newer models are better. But of course of one needs the bigger build volume, it seems like a good choice. Helmets are usually a problem on the standard 225x225, not so on the artillery

@TripodsGarage Жыл бұрын

@@KZfaq_Nr.1 - Yes, with Elegoo machines, most have a very positive experience out of the box. There have been complaints of stripped gears in the extruder. This happened on my Artillery Hornet. The X2 is about 2 years old, and Artillery hasn't released any new printers since. I would like to see a Plus and Max version of the Neptune 4, like they did with the Neptune 3. Then the consumer has the option to pick a Marlin or Klipper machine with almost identical footprints. The way this rant went, you would think the title of my video was "Why I love Klipper over Marlin" or "Never buy another 3D Printer with Marlin". I simply said the comparisons between the Neptune 3 and the Neptune 4. That the Neptune 4 has a curtain fan, more inputs, ethernet jack, and a higher spec'd board running Klipper. I proceeded to say that the Elegoo Neptune 4 is far better than the last Klipper bed slinger I tested. I never once said that Klipper was better than Marlin in this video. His claims of me pushing Klipper in this video is laughable. However, as a 3D printer OS, Klipper is superior in many ways. Plus can be just a simple to use as a Marlin based machine, just like the Neptune 4. It has been bad enough for printer manufactures to provide updated Marlin firmware. Who are the manufactures are selling Marlin input shaping and pressure advance?

@liquidsleep 11 ай бұрын

@@TripodsGarage I waiting for the neptune 4 plus as my first printer what I worry about is those complex printer head including the extruder and how difficult it is to dismantle them when there is problem. Something I'd like to hear more in the reviews. I wish they made easy dismantling a feature. Nice review BTW !

@randogame4438 10 ай бұрын

So this Elegoo, Cura, Klipper, Moonraker...wtf, so confusing. And that doesn't even include a slicer? I'm so confused and your video is obviously not made for a newbie in this game. You flapped through that like a goldfish who'd jumped out of his bowl.

@TripodsGarage 10 ай бұрын

Oh! I didn’t know that this was a Cura, Klipper, Moonraker exclusive instructional video. Let me go change the title really quick! Oh! Guess I didn’t mention that the software (Cura) was included on the included USB at 6:50 into the video. I must have flapped outside my fish bowl…. When watching car review videos, you must want driving lessons as well 👍. Looking forward to seeing your exact comment on other review videos as well!

@randogame4438 10 ай бұрын

@@TripodsGarage I didn't know my comment was going to trigger you so efficiently! After finally getting my 4 pro setup I discovered that the Cura (supplied with the USB) was the slicer that removed 2 of my questions. But that's neither here nor there. Fact is your video left a lot to be desired, as well as your follow up response. Could've said "you may be right, I'll post a more indepth video later, stay tuned!" I won't be staying tuned for any of your vids in the future. Peace out Goldie!

@TripodsGarage 10 ай бұрын

@@randogame4438- You will be alright, I know listening can tough for you. No need to shed your emotions here, I am not a licensed therapist.