Fitting / Removing Links from an Omega Speedmaster / Seamaster Wrist Watch

Рет қаралды 203,276

ARCHIELUXURY

12 жыл бұрын

Пікірлер: 192

@roro0465 9 ай бұрын

absolutely didn’t see this commentary coming it’s HILARIOUS

@RichardDavisPhoto 3 жыл бұрын

Perhaps the most honest video I've seen this year if not ever. Thanks for telling it straight.

@odawgbrazy14 4 жыл бұрын

Oh my god this narration is hysterical I cannot stop laughing cheers mate

@Randyolsson 3 жыл бұрын

I love how this is like the only video on how to adjust an older Omega bracelet.

@TomFoolery9001 5 күн бұрын

First one I came across for my style and I am NOT disappointed.

@geo321100 10 жыл бұрын

Very fucking helpful. I was able to fix my old fucking Seamaster and will wear it with fucking pride knowing I fixed it myself. You are the Fucking Man Archie!

@kurtmarucci5933 4 жыл бұрын

I have four fucking pins on my fucking Seamaster Pro that I need to fucking replace. I don't fucking know if I should bring it to my fucking Watchmaker, or buy the fucking proper tool and do it my fucking self.

@Hofology 2 жыл бұрын

Ten years later the Pontiff still dropping knowledge

@BR5428 4 жыл бұрын

He's correct. It is a damn tough job removing pins from Omega Seamaster bracelets.

@kurtmarucci5933 4 жыл бұрын

No, it's a fucking tough job, Dick.

@pretty_taurus11-11 3 жыл бұрын

😂👍🏼

@kevincarroll28 3 жыл бұрын

Fucking nightmare...broke and bent 2

@Disputin 9 жыл бұрын

Was not expecting all those "f bombs" hahaha

@MrMarcelomachado1981 4 ай бұрын

The way you describe it couldn't be any more accurate... but I finally made it. Thank you! ❤😂

@thomasmatthew7759 Жыл бұрын

Everything about this video screams luxury. Love it, thanks.

@Adarkane325xi 2 ай бұрын

Archie Luxury - who swears like a sailor! Love it, lol. 🤣

@papapatriarchy 4 жыл бұрын

I wanna buy this guy some drinks and hear his stories!

@rlawrencemills 7 жыл бұрын

finally, a video for the common man! language and all

@369369nighthawk 3 жыл бұрын

Common men are not degenerates like this fella

@icemantree 7 ай бұрын

every few years i have to re-watch when servicing the bracelet, this is the only video i ever needed. thanks m8

@devii1992 2 жыл бұрын

I can't stop laughing at how funny this video is! 😂

@atway70 3 жыл бұрын

This is the best instructional video I've seen in a couple years. Well done.

@scdharley 12 жыл бұрын

Great info, thanks Archie! What makes it a bit easier for removing those pins is that device you can get with the watch toolkits that you can screw in the one end and it pushes the pins through the other side. These work great and you won't have to worry about your hand slipping and scratching the bracelet.

@michaelmillard6249 2 жыл бұрын

@SofiAnabelle Жыл бұрын

Mine broke trying to get these out

@SofiAnabelle Жыл бұрын

Had to go it by hand

@tommyjakks Жыл бұрын

Thank you. Most straight up no nonsense video I’ve seen in a while

@jrishel23 11 ай бұрын

Best watch maintenance video ever. Tells it like it is.

@Ace101Boss 3 жыл бұрын

Watched this in 2021, it really helped a lot.. those little tubes piss me the hell off lmao

@jasonwongzero 9 жыл бұрын

Damn awesome. Make more videos please.

@Ls1opSS 4 жыл бұрын

Oh that was great. Just made my day better. Thank you. Seamaster Aqua Terra mk1 in stainless. Best buy right now.

@kevinheath5046 Жыл бұрын

This was actually really helpful. Thanks Arch!

@kirkguerrero8958 9 жыл бұрын

Hahaha I love the swearing mate! can't stop laughing. Nice watches you have.

@Dunkaroos248 12 жыл бұрын

My Oris has this exact same setup and it is a little difficult. I used pliers as well and a small hammer to carefully tap it back in.

@NCF80M3 3 ай бұрын

Hahahahahahha wow did not expect this to be so funny! It’s usually some rich snob with a perfect lexicon making watch videos. I’ll take this guy all day hahaha

@graemethelaw 7 жыл бұрын

Ten seconds in I was like "this is going to be dull"... "IT'S A FUCKING BITCH!" Love you.

@bethevoice-rawreviews902 5 жыл бұрын

Screws are obviously best :) I thought the arrow was to demonstrate which direction you put the pins back into the bracelet ? I may be wrong , I am open to re education .

@GarrettGrimm 10 жыл бұрын

3:35 That's all you need

@timickan 11 жыл бұрын

nice video. I've just flicked my current 1998/849 bracelet, and replaced it with the 1171/1 bracelet. Got it from Watchco in Melbourne, and it looks superb. None of the flashy polished shit that makes the band look like it's off a lady's Longines. Just hollow links with heaps of adjustment, and makes the watch look like a sports watch, not some half assed dress watch band.

@Duncan_Rennie 12 жыл бұрын

The latest models do use screws. The Bond type Seamaster bracelet is even worse because there are 2 small inner tubes and you gotta worry a whole lot more about aligning the buggers.

@huzcer 4 жыл бұрын

what happens if you don't put those tubes back in?

@ChrisEvers1976 2 жыл бұрын

Best instructions and commentating out there!

@vagabond-yj8pn 9 жыл бұрын

Thanks for the tip Archie very helpful.

@Mataz007 4 жыл бұрын

Holy fuck I had a good laugh watching this. Thanks.

@ECCOSunroomAwning 4 жыл бұрын

Love it!

@MrMrfrankward 9 жыл бұрын

This video cheered me up no end on a day I needed it most. Thank you :)

@drewpd7 6 жыл бұрын

HOLY FUCK I did not see this coming. My new favorite video.

@alancornes8916 3 жыл бұрын

I had just started to attempt to add another link to my Seamaster bracelet when I came across this video. Thanks for the headsup Archie I think I’ll take it back to the Omega store and let them tear their hair out instead.👍

@markpicotti2610 4 жыл бұрын

Sir you are the real thing 💯

@aaronkilleen813 7 ай бұрын

OMG this is the best tutorial I have ever watched 😝

@Hutch118000 11 жыл бұрын

Hey Archie you describe this perfectly. Ive owned my Seamaster for years and its a fucking nightmare when the pins break with amazing regularity. its a fucking bitch !!!!!!!!

@Sykes1932 10 жыл бұрын

Thanks! :)

@NagisaShiota11 Жыл бұрын

Truer words cannot be said. I clicked on this video to figure out if there was a secret to getting the pins all the way out, and I found the secret. I went to a local jewelry store where they did it for me. I won't be trying that again myself

@mrbacchus6127 2 жыл бұрын

At least those collars are pretty big. Try Seiko and their damn microscopic collars.

@adamcurpier 9 ай бұрын

Great video, honestly straight forward 😅

@sharvav Ай бұрын

Fantastic

@stevewillonms 5 ай бұрын

Thanks Archie very helpful

@CarlotheAverageGamer 11 жыл бұрын

My favorite channel ever! F*k yeah!

@dennischen8887 5 ай бұрын

I damn near destroyed 4 of my pins on my 1861 speedmaster bracelet. The watch was used when I bought it and had decades of caked in dirty inside the pin holes so it’s impossible not to destroy the pins just to remove it. And I hate this bracelet. Ordered a flat link with screws and current using my marine master 300 rubber strap until that one comes in the mail.

@eddiethomaz 6 ай бұрын

Amazing info and absolutely hilarious

@M3au 10 жыл бұрын

best fuckin' watch related tutorial on the fuckin' interweb!

@jeffwise8398 Жыл бұрын

This is awesome!

@Grayback666 7 жыл бұрын

hey how much is a 2nd hand speedmaster worth?

@hamidmustafa6649 5 жыл бұрын

It depends on the type of the speedomaster. You can say 1500 euro to maybe 20 thousand or more, I don't know and Most important it hath to have documents.

@333maddoxtj333 Жыл бұрын

Got to love the honesty

@eastakho 14 күн бұрын

hahaha i love this commentary!!!!

@AttyTude53 7 ай бұрын

Thank you. I am of an age where fighting with tiny parts is impossible. Why would any company make something so impossible to size.

@allanharriman4693 Ай бұрын

You are right. Strong design, but a bitch to do.

@dfiled_ 9 жыл бұрын

I love this guy. Keep it up.

@terryjones5339 2 жыл бұрын

Thanks man. I was wondering what the fuck I was doing wrong. 👍

@stathap 3 жыл бұрын

Probably the least useful but most entertaining vid on sizing a Moonwatch bracelet yet

@Corksy 2 жыл бұрын

Well, as I was trying to size my bracelet and had a very hard fucking time doing it, I am really happy that I stumbled upon this. I then knew I only had to push much harder and then it worked.

@daniellees7873 8 жыл бұрын

Does anyone have any idea what tool is required for removing the Omega Planet Ocean 45.5mm bracelet? Been trying with some crap springbar tool for 2 days and getting pretty over it. Would take it to the jeweller but dont want to do that every fcking time i change the strap. Any tips fukkkers???

@michaelferguson7771 4 ай бұрын

Hilarious and informative.

@guesswho2140 8 жыл бұрын

hahaha some people might think your language is offensive but fuck man, thats some funny shit, well my speedmaster finally fits so cheers hahaha

@Shepard-Thomas 5 жыл бұрын

Absolutely hilarious. I laugh every time I watch.

@Dax67 11 жыл бұрын

I absolutely love this video!!! I'm rolling on the floor laughing my ass off. Well done!

@cdiclerico 5 жыл бұрын

Fucking hilarious and informative. Perfect.

@richardtwyning 11 жыл бұрын

Sir, you are a gentleman. I feared the amount of pressure was applying was too excessive, but after seeing your video it did the trick. I agree sir, it is a F*** Bitch!

@niteriderband4713 4 жыл бұрын

He is right and I agree with his language. I am trying to adjust my seamaster bracelet now and it is a bitch!

@jarkkokettunen6156 3 жыл бұрын

I bought a used speedmaster and tried to size the bracelet today 😅 ended up with 2 bent screwdrivers trying to remove the pins... I took the bitch to a jewler after that.

@jacquesrondeau5388 6 жыл бұрын

Love this guys demeanor!

@solidus1995 4 жыл бұрын

Took my 9541 to some shithead shoemaker around the block and he was hammering away at my watch then snapped the remaining pin in three different parts and lost a tube and pin from the extra link. Decided not to charge me and somehow the watch wasnt scratched. Anyway now I have to go to an actual watchmaker and let him scalp me to replace the damaged pin so my seamaster doesnt explode when I'm walking around like a fuckhead.

@chumleyk 12 жыл бұрын

Use screws? They'd only make off with your watch...

@rlr05091987 6 жыл бұрын

Fucking great video. Will take my fucking watch to the fucking jeweler. If you are ever in Philadelphia I will buy you a fucking beer. Later!

@ilunghi 9 жыл бұрын

ok quite useful video except for the ham sandwich, but why not get proper link removal pliers?

@brucelee9941 4 жыл бұрын

Now if I can find something thin enough lol

@johndickey3824 7 жыл бұрын

love it!

@ruedwyer8510 5 жыл бұрын

I imagine 80% of the views on this vid are due to the extreme use of 'sentence enhancers'. Good on ya mate!! Hilarious... 4 stars (out of 3)!

@AirPowered Жыл бұрын

Just tried this the day… nearly went from a Seamaster to an Airmaster (oot the windae)!

@steveziv 11 жыл бұрын

A $5 thumb screw style pin pusher makes this job somewhat less of a f**king b*+ch.

@stretford_ender 7 жыл бұрын

Fucking bitch of a job but this video nailed it! Fucking cheers mate

@aquaticcentral 5 жыл бұрын

fuckin loved it

@IHATEYANKS41 5 жыл бұрын

Fucking ace mate love it

@cb35x 11 жыл бұрын

seriously funniest thing I've heard in a while - made my night

@whereRbearsTeeth Жыл бұрын

Classic AC3

@dvdordie 10 жыл бұрын

this is a fuckin' great tutorial to bitch out the pins on my omega constellation. thanks 4 a fuckin' awesome tut!

@cebruthius Жыл бұрын

2:17 Nice bend, fuckarooney!

@1drummer2 11 жыл бұрын

Archie great thank you all sorted with a smile great vid !!

@pretty_taurus11-11 3 жыл бұрын

Great fucking Video!!🦾😂💗

@CryptoSeven7 3 жыл бұрын

Haha brilliant

@marcd303 8 жыл бұрын

Fuck this mate. Got half through and shit it. I'll take it to simpsons, timpsons whatever. ive got a seamaster 120M and can I fuck get the pins to move. Does this vid apply to older Omega bracelets?