You actually sounded out PRNDL. That made my day.

Great info Brian, hope your doing well my friend !

Really enjoyed this info. Very helpful... btw: I recently programmed a Nissan pcm. What a headache to say the least 🥴🥴

I just get the U101 Imma try this and see . Nice video man

Awesome job!

Thanks for sharing... Cheers.

Hi, are these TCM modules repairable? Is it possible to program them on the bench? Thanks

Please some help.. 2011 fiesta need new tcm, but can't find one to match my partt no. Can i program any other part number to my vehicle?

Hi Mr.Brian I want to ask a question about my Ford Focus.I live in TURKEY. It’s 2015 model , 1.5 tdci powershift. Recently I had a warning on the screen as ‘’ Battery shut downed the system to keep itself’’.I called service and they offered to replace the battery because it was low or overed. We replaced it with a new battery, after that I had another 3 more faults. 1-Engine fault 2-AutoHold is not used 3-Transmission is in limited mod. But nearly for 20 days these faults havent been apparead again.Authorized local mechanics of Ford advise to change TCM and test again, İt may be need to be replaced all transmission unit . Fault code is P2855. What do you you advise us ? Can it be solved by reprogramming the TCM by computer ? , İ hope to hear from you worriedly

Buenas días , estaría la posibilidad de hacerlo o traducirlo al español gracias

When i get touch point numbers that far off from each other normally thst tcm seems to drive like crap. Have you noticed that?

Also if you use same tcm part number you can skip pass progrmaing and just do a relearn. Found that out after losing $50 everytime I would program a bad tcm. Very hard to find used good ones.

The clutch adaptive failed on me twice before finally passing the third time on a used module. I was shook being my first PMi just a couple days ago. I thought I messed up somehow. But all came together and everything worked out great.

Hi Brian,i have a question regarding buying a laptop for GM flashing with a drew technology pass through,is surface pro suitable for this matter? thanks.

Very informative. What program do I need to buy and what cable etc is required for me to perform these functions? Best regards, Doug

Hello, How about fault code p287a. My car focus from 2012 with a powershift transmission has big problem when I stop and want drive mis the transmission and also reserve not work till in off the ignition for 5 min. After work everything till in stop with drive en it begins the same problem.

Good day, I would like to know what model programming tool did you use? And also if you know about any cheap programer that I can purchase?

Hi, excuse me I have the VIM II for but my IDS doesn’t have the option of Module Programing! Is there a Way that I can get in touch with you? Thanks

How can I do the learning using OBDSTAR X300 DP scan tool?

I have a 2013 focus se 2.0l won’t start after i drive it. I checked battery was good, put new starter, new relays on starter and Ignition relay and new negative battery cable. I also used the other key. Also it seems when it warms up and gets driven it don’t start. But when it cools it seems to start again. I’m stumped! Any pointers?? Thanks in advance Great video!!! Fords sucks! Junk boxes

Very good

Do you know if a new TCM will fix codes P2767 and P0720? I replaced both sensors, but no fix yet.

What happens if I do not have a new TCM programmed? Will it not work at all? Will it shift weird?

I have ford foucs 2012. When I drive for an hour, the reverse didn't not work and the transmission jump from 1 to 3. After the car get cold for long hours it can drive normaly. Is that Tcm error and need to change to a new one?

Replaced the clutch kit on 2018 ford focus and still having shifting issues and also replaced actuators but it’s still having issues do you have any recommendations?

HI there, I saw your video on youtube about TCM programming . So i got a few ford fiesta tcm and mazda 3 tcm. How can I test if they are programmed properly and if they need any programming how can i do it. I can buy the hardware and softwares needed. My biggest concern is how do I diagnose/ program the tcm without fitting the tcm to the car. I saw a lot of videos on youtube where they plug the J-box to the car to diagnose/ program. I would be happy if you could help me out. Thank you Fernando

Where can I buy a computer like the one you use,. all the equipment you used in that program?

Hey buddy what program you are using?? On the computer for ford?

Can this programing work with Ford figo 2016 model?

where can I get the program that you are using

Clutch B motor not working, what could be the cause bro? Motor is fine swapped and tested.

i put a new tcm in my 2011 fiesta and it keeps saying wont communicate well trying to program any ideas

Can I use this software with out license activation?

Hello, I just got a new TCM and it blows fuse F2 (50a) every time I reconnect the battery so its impossible to even program. Any Ideas why this keeps happening? I have a junkyard and original unit as well and neither of these blows the fuse, and it doesn't blow the fuse with the new module disconnected either. Any help would be appreciated! Thank you!

Hi, How aboaut this code on Ford fiesta P0700-00-2F,

Worst transmission ever built. Wife has one which is now broke for the second time in 24 thousand miles....Great video though man.

i have two 2016 ford focus that not going in to reverse when hot

Brian plz help shudders at lights engine code U3003:16 2012 titanium

Can an autel 906bt program it?

Is there a way to reprogram a used one ?

Great video. Just subbed. That software your using has an irritating sound...

Hello boss good day, I need your help

Sometimes you gotta get up to speed faster and it's fixed

My car Ford Focus 1.6 L 2013 automatic has a transmission issue. When the engine becomes warm after driving for more than one hour, the dashboard shows transmission error and gear shifts improperly. The local garage couldn't find the exact reason. Error codes are P0606 and P06B8. Could you please tell me what would be the reason?

Unfortunately these cars require gas too, not just a good battery. That tank is empty almost dry. It wouldn’t be nice, if the car stop running while you’re programming….

I`d like to have 5 minutes alone in a room with the guy that invented this mess of a transmission.

Electronics are destroying humanity

I left my battery unhooked and it programmed itself thru the pump. NO updates but it works. Shifts good and everything. No check engine light so I saved the 130 bucks. Plus ford said they can't get the reman tcm to program but they might not know what you and know.