was it shifting odd .. along with the no reverse? I think i may have the same issue

Hey Corey this worked for my car too! Has you had further issues with the TCM since?

Temp fix

Wow!!! Really???? I have a '14 and first and second were slipping

That's a temporary fix for your case. You will need to get your transmission checked by a professional. Maybe the actuators jammed (very common until 2015 due to rust).

work?

I can’t get it to work

Not working for me , ford grand c max

It worked man , my car was shifting so bad, I thought the TCM had to be changed I did this then took my car for a drive and it worked so thank you .

@@LuisFlores-ji7vw your very much welcome it worked for me as well

Dose your car not driving forward and reverse

How was the 90 miles drive? Did it fix the problem?

Smart guy😜

😍😍😍

How long did it work ?

@@josephsaj8930 this method is temporary? please reply

Marci Sprouse is it still working

Just worked today hahah amazing

Do you know where the grounds are?

@@saucedavictor664 one is to the right of the battery box, 2 are underneath the air filter box.

@@RemedialGore Thank You !

@T. Stew there is another trick taught to me by a Ford mechanic. It's called scrubbing the clutch. You need to find a nice strip of pavement with no traffic. Come to a stop (it works well at night getting on a highway on ramp for me) and then floor it and let the car run through all 6 gears which means you'll be at like 70MPH once you get into the last gear (6th). It's best to do it at least twice and then you'll notice the car begins to shift a million times better than before. I don't really understand why it works, he explained it to me but I didn't understand, lol. But it definitely works!

By fixed, do you mean removing the paint off of the contact points for those ground wires?

Any updates ?

Temporary?

I'm gonna do this and drain out the transmission fluid and replace with new. I don't wanna spend $2,500 but I only have 74K miles on it and I love the car. I'm gonna see how this goes first

How you solve?

Mine goes into reveres but dosnt move the car. Will this fix it????

Try again

Exactly same issue I'm facing ill try it 2mo

@@dashtyATG mine hasn’t fixed it, I am having to sell the car as repairs cost 800 - 1800 pounds

What year do you have?

@@aidenthompson4998 2014

What issues were you having by chance my shutters at take off and slightly going into 3rd I don't want to do the reset and it make the car immobile

@@kingqupa4508 replace transmission oil with OEM, clear ground rust. Use manual Shift mode when bumper to bumper.

Did it stay fixed?

I have the same car, and it just started having problems with it shifting into a higher gear when accelerating. I too am curious if your car stayed fixed

I thought the TCM had to be reprogrammed at the dealer? How did you replace the TCM yourself?

I am so glad you got your car working and you are right Scumbags dealers Electronics have been made easy for them to swindle the public But this design is manufactured by the manufacturer What did you do and what was your prior problem with your automatic.?

You changed your TCM but did it have to be reprogrammed with a ford scan tool.

@@jasonashley9853cause this reset and clears out the previous vin in the TCM from the junkyard one

@@MixedButterflynope this resets the TCM without a tool Ford does this and acts like they use a computer

Search for Ford Focus ground problems. I saw another video where the person was having the same problem, and it was related to paint on the grounding lugs.

@@briankirkpatrick8734 temp fix

Hi..I have a 2013 ford focus as well..I can't understand what he is saying to do?? Can you please explain what you did? Please??

@@franceshaynesdevinelife6874 Turn on the car (don't start engine, just turn on the key) shift the gear to N, then turn off the car, wait 15 seconds. Shift the gear to P, turn on the car (don't start, just turn on the key), wait 15 seconds, then turn off the key and turn on the gear again on N. The vehicle will give you a Transmission Ready message.

@@anttoha Wow..Thank you so much!! Haven't tried yet, and I just got your response..Thank you so much for responding😇👏 Yeah, took it to dealer they said it wasn't the TCM!! Conveniently the warranty states 7 years or 100, 000 miles, I didn't qualify, so upset!😡 And then quoted 2,500.00 for new transmission!! Like I have 2, 500.00..I been praying for God to show me what to do, fix, sell, or trade-in?? Yeah but Thank you so much!! Will update!💖🙏👍

@@franceshaynesdevinelife6874 You are welcome 👍

Nouamane El Bakkali could you not reverse with power and also was it driving with no transmission power as in not moving

👍🏻

what problem you had ?

Push button start?

What was your car doing? My started shifting extremely hard and sporadic today

@@CodyHinson-pm6hu but dint work for that long as overall focus are shit models

What code a 7555.0 mean

For ford.focus 2010means

Trade in

👍👍👍

10-15 mins but it doesn’t work everytime

Do it work if your car say transmission fault service now ?

Ford dealer just lied to me that I need a new clutch fork plus labour over $3800 Australia currency. In many youtube showed problem with TCM & clutch actuators (also called clutch fork). They must lie to me. I knew it. How to access traction control?

i got a 2016 ford focus wont go in reverse ? any help

@@garrieparsons2265 replace bottom clutch actuator. It's easy job.

@@quantumofsolace872 thanks buddy 👍

It will say ready after being in the on position for awhile?

@@rayzelito like 10 seconds or so or until you start it and put it in gear. Key in on position, wait for dinging to stop, put it into neutral and the message should appear.

Just want to say this worked for my 2014 Focus that was having the same issue. The check transmission light is still on, but the car is shifting correctly now without bumpiness.

@@mikeconstanza temp fix

the run position means not to start the car, right?

Did u ever try it?

@@JavierLopez-zd3gl yes I tried it didn’t work for me. Found out it was a common defect and Ford knew about the crap transmission design. They have a voluntary recall if the car is under 150,000 miles for the transmission control module. I ended up getting one from a junk yard and putting it in. It wasn’t hard at all. The one I pulled wasn’t tuned with my car and had to go on a computer. I drove it to a dealer and got out of it. Was a good car on MPG wish I had it still because I got a truck. But the worse part is the Ford engineers knew it was a junk design and still released it 2012-2016 I believe is the years it for focus and fiesta I believe. I think it over heats and over time the TCM stops working Good luck if you can I would advise get rid of it. The worse part of mine is I just got brand new tires, breaks and rotors, rear shocks and new sway bar bushings put on close to $2k in work on it and a month later had those issues started and sank anoth $400 till I figured out the issue. I Got a good trade in deal only took a $500 hit on it. But now paying out the arse for Ga$ because of This clown show called The Biden Administration. Good Luck if your having issues

I think you have transmission issue . Better go to garage

Clutch is on its way out. Go to the dealership, if you’re under 150k, they’ll put a new TCM in free of charge.

Lydia Nevins if you aren’t under warranty, you’re probably looking at around $1100 for parts and labor. I grabbed one out of a junkyard car and put it in myself, it wasn’t too difficult. I haven’t had it programmed by Ford, but I did do the battery jumper pcm reset, and its been running great. I just drove 1600 miles without an issue.

@@RKCorinth trade it in

Yes, 2nd.

No

Did it work for you?

No

Yes of course it will fix the issue

what is the clutch relearn process

This will not fix your Tcm , if tcm is bad is bad. Will continue to have drive ability problems

Ready to trade in

What this 'procedure' is to reset the 'home position' of the clutch pak, temporary fix. Will probably have to do EVERY 6mo OR until you park that shiny new TOYOTA in your garage!

Check your tcm

It is fixed ?

How it is now ???

yes i think you can clear the jerking

Try pushing the gas a little harder on the start. This car doesn't like to be driven easy...it likes it rough.

Ur clutch need to be clean or changed Mines was the same and yust bought one and works no shakes or nothing

@@dacingduck603 Yes bro. The clutch is the problem!

Renault?

Get a scanner and see codes and erase codes

Claim tcm warrenty You can claim till 150k

Transmission speed sensor glitch, just reset pcm by using obd2 device.

I need to know this too. If you found out please reply

@@nikkimichelle2451 just press start wihtout pushing on the brakes

Sorry It will not work with your model, New video is coming Soon you can do it with Mobile app

Joseph Saj Ok thanks for the info

It'd be the same steps but you don't hit the brake when pushing the start button, it'll be in the run position, blower fan working but engine not running is the correct on position. Otherwise same procedure.

It's a ......Fix-Or-Replace-Daily!

@@TheOzthewiz although it's quite reasonable at 150k kms, ford is common man's BMW