GoPro Karma Drone Pairing Issue

GoPro Karma Drone Pairing Issue - TRY THIS FIX!

Рет қаралды 51,933

3 жыл бұрын

For the most update to date video on this topic (June 2022) please watch this video: • GoPro Karma Pairing Is...
___________________________________________
Please please please comment below and tell everyone if this works for you. There are thousands of people searching for a solution, and we all need to know if this works for you!
Whether it does or not, please sign this form to be included in a letter we are sending to GoPro asking (demanding) them to resolve this problem.
forms.gle/gyc7tuf4Moy6Ka5S9
For more information about the letter, see this previous video:
• Dear GoPro, Please Res...
If this solution works for most people, I will post a much higher quality video....I'm just too excited to wait and I want to share with all of you ASAP.
STEP BY STEP INSTRUCTIONS:
My process for resolving the Karma Controller and drone Pairing issue, as demonstrate in video:
1. Remove harness from drone and remove camera from harness.
2. Turn controller on. Let it sit until much later.
3. Hold power button on drone for 8 seconds to enter pairing mode where lights flash and blue power lights flash. Let it sit until it turns itself off.
4. Press Power button to turn drone on. Wait for error lights on power button (flashing red light).
5. Insert the harness into the drone and lock it in. The camera is NOT in the harness at this point. After ~20 seconds the harness will activate.
6. Wait ~1 minute for the harness to deactivate and turn itself off.
7. Power off the drone by holding the power button.
8. Insert the gopro camera into the harness and snap the harness closed.
9. Power on the drone by pressing the power button. The harness should activate with the camera inside.
(you can also try this option: turn the drone on to pairing mode by holding the power button for 8 seconds).
10. If your controller and drone are not paired, Go the the pairing mode on the controller and turn off the drone to turn it back on into pairing mode.
Throughout this process I was very careful NOT to download any updates or available maps. However, I do not know if updating will ruin anything.

Пікірлер: 327

@1percentG 3 жыл бұрын

UDATE MAY 2021: I was able to get a replacement drone from GoPro. Please view my newest update on this issue here: kzfaq.info/get/bejne/ipyWo8mBuZ-1lI0.html

@ChadwickRider 2 жыл бұрын

I purchased two additional batteries for it when they were on sale, spent like $200 additional for those... went to turn on the drone and out of nowhere it wouldn't pair. I didn't do anything, no updates, nothing, it just wouldn't pair. I've maybe flown it 3 times, total, pristine new condition. Contacted GoPro and they told me they don't support the drone anymore and that I'm shit outta luck. Offered me a 25% off coupon that was valid for 14 days... and told me to suck the $1200 I spent on the drone as a loss. Never again will I deal with their BS, worst customer service system on the planet.

@Angus-Ghoul 2 жыл бұрын

They send me a new drone and i have the same issue, what can I do :(

@ColdSnapCarl 8 ай бұрын

It is a drone issue not a controller issue. You can find connecting drones for about 200. Do not replace the controllers

@tha1mastery 3 жыл бұрын

Im trying to follow this steps today as I just find out my drone is having the same issue. I haven’t use my karma in a few months and of all my drones, this is by far my favorite. We need to let gopro know that there are several of people who still love the karma and we would like to see them not giving up on such amazing device! ✌🏽

@ColdSnapCarl 8 ай бұрын

Bluetooth module failure :(😢

@anthonycase9923 3 жыл бұрын

Tried with no luck. Drone will not power off from pairing mode without removing battery. Hopefully this will be the beginning of a fix for everyone....

@siala2 3 жыл бұрын

I got same think,

@JayBearjaysbigadventure 2 жыл бұрын

Did you ever fix this? I'm in the same boat.

@Gattonerealestate 2 жыл бұрын

Any updates

@A61CORDE 2 жыл бұрын

hello, i have the same problem, any comments will help. thanks

@albertoponce2421 2 жыл бұрын

I barely receive my karma replacement from gopro and still does same thing I have to pull out the battery cause don't turn off

@EXTRAMUSIC 3 жыл бұрын

I had the same issue yesterday: drone wasn‘t able to control the gimble, could not be turned off and would not connect to the controller. The last time I used the drone was half a year ago, in between I used the camera and the gimble without the drone (which seems to be part of the problem). Today I did the exact things shown in the video and - magically - I was able to reconnect drone and controller and I was able to fly as if nothing ever happened. So in my opinion it’s definitely a software bug and no problem with the hardware. Many thanks to Gavin - you saved my holidays!!!

@christripp7607 Жыл бұрын

This worked for me! The controller and Drone were paired. 1. Turn everything off. 2. Remove stabilizer / camera and remove camera from stabilizer 3. Turn on controller 4. Turn on drone 5. Wait for error to insert stabilizer. Insert ONLY the stabilizer 6. Wait for error to insert camera. Insert camera into stabilizer. 7. Drone will beep, blink and recognize 8. Wait for Drone to recalibrate stabilizer 9. Go fly!

@duncs001 2 жыл бұрын

It's working perfectly now- not sure why- After spending two days trying various things to get it to pair, including the steps above twice, I submitted a few requests to GoPro for support. They tried contacting me several times, and I couldn't hear them on the other end. That was a few days ago. I again requested them to call me again today, explained the issue, exactly the same pairing issue as described in 30 different KZfaq videos, and they called me today and asked me to send them a video of the issue. So I set up the drone on the dining table, mounted the phone on a tripod and hit record. As soon as I started the controller and it asked to pair with the drone, I turned on the drone and it worked perfectly. The stabiliser activated, the drone paired, and the camera is recognised. I'll fly it this afternoon and get back to you. I must have requested support via the GoPro hub ten times, and it works as soon as they get in touch with me. Last week I did download the GoPro app and register the drone, stabiliser, and GoPro, etc, on the app, first time I have ever done it, and perhaps that had something to do with it???? I don't know, but it seems to work perfectly now...

@juans4085 3 жыл бұрын

Sadly my drone doesn't stop trying to pair or shutdown until battery is drained. So I restarted your steps and didn't work that way either. 😞 Though grateful to people like you for putting in the effort to help others. Still get a thumbs up from me.

@andinson01 Жыл бұрын

@Simo5000 10 ай бұрын

@user-uc8ff7od5s 8 ай бұрын

@tylerdannhaus8063 4 ай бұрын

@dfortunati 3 ай бұрын

@joserobles3800 2 жыл бұрын

WOW! Thank you soooo much brotherI did as you suggested and was able to get my Karma drone and controller replaced by Gopro and YES they waived the "One Time Fee" Again Thank you for all your hard work and dedication to "taking it to the man" when everyone knows they were not right. Cant wait to fly my drone! You ROCK!!!

@billymontz 2 жыл бұрын

Thank you, all for this information, especially Gavin! I will go over it more carefully. Here's a weird one. Trying to salvage what I could, I removed the gimbal/camera, which was not swinging into position at start up and inserted it into a charged, hand-held stabilizer, thinking I could use it on my bicycles, etc. It worked fine. It also worked fine when I plugged the assembly back into the drone and the second time. Time will tell. If any good has come of this, at all, it's the purchase of an Autel. Thanks again!

@tylert2126 3 жыл бұрын

Just found these videos after trying to fly my drone out of storage. It will not pair with controller, and it’s doesn’t turn off automatically using this guide. Keep up the fight! I’ll sign up! Thanks! PNW

@MikesManCave Жыл бұрын

Tried this several times, did not work, the harness never activated. GoPro does not give a crap. Great to see it worked for you, but I think you just got lucky. I will put her back into storage now. 😭

@bradalves1152 3 жыл бұрын

Hi Gavin, thanks for your awesome effort to rectify this issue, obviously looks like GoPro just want karma to go away, I tried your method but same problem as everyone else, looks like going to the dark side and will buy a dji 🤘🤘

@moontech2545 Жыл бұрын

Man, thank you for this. It works perfectly. Also, I recommend doing the part where you plug the camera case with the drone turned off and it works anyways. It's better to do it this way, I didn't try it with the drone turned on because of short circuit risk. But, thank you very much for the video. Awesomely made it.

@JourneyWithDavaoJack 3 жыл бұрын

I bought my KARMA DRONE from a co-worker almost three years ago. He found it his neighbor's tree and the neighbor allowed him to have it. He brought it to work and eventually I bought it with the camera very cheap. I eventually replaced the broken propellers and got a charger and a controller but the battery would not charge. It sat in the closet until yesterday when my new battery arrived and proceeded to the pairing process which brought me here. I followed all the steps up to a point when I noticed that the controller had a couple of updates and after the that it all connected just fine. I took it out on the back porch for quick mini test and crashed it. I got it up and running again and took it out for a better test run and it worked great until the battery ran down. I'm happy.

@meanmariboi 3 жыл бұрын

I wish this worked but my drone won't turn off while pairing it just keeps flashing. However I am intrigue by your discovery and think I might try different combinations to see what might work for me. I suggest everyone should play around with different methods as it could be different for some of us. This is better than packing it away again waiting for a miracle to happen besides I got nothing to lose. Cheers for the video and so glad you got yours to work again.

@BennyMr7000 Жыл бұрын

Hi, mine drone has the same problem as you. Did you find a solution?

@jha0375 Жыл бұрын

@@BennyMr7000 guess not :/

@Kujbor Жыл бұрын

@@BennyMr7000I found that if you connect to the camera via a mobile quick and change the gimbal to a grip, then sometimes the gimbal then starts working in the drone, but the drone flashes red very quickly and does not react at all, after a reboot it does not connect again as usual. I also once managed to somehow get everything to pair and work, but in the end I flew only one evening and the next day it did not work again)

@MrCarloptor Жыл бұрын

2 años esperando soluciones y ya pierde uno la esperanza. El cardan no funcionaba nunca al encender dron. El emparejamiento siempre sin éxito. Encontré este video y me animé a probar. Cuando modo emparejar no se apaga solo. Si enciendo alguna vez parpadea en rojo y si acoplo cardan se activa. Bravo!!! vuelvo a verlo moverse en el dron. Cuando apago y coloco Hero 6 black y enciendo no ocurre nada, no se mueve cardan ni enciende cámara. Por el contrario si acoplo sin apagar enciende cámara y reconoce está en el dron por el símbolo en pantalla. Finalmente apagas y de nuevo se queda igual no responde cardan. He conseguido incluso en diversas pruebas luz encendido de color amarillo latente, no sé qué significa. Una batería ya no funciona cuando cargo, la otra sí. Gracias de todas formas por intentar resucitar el dron. Nunca compraré ni recomendaré nada que diga GOPRO es una basura y una empresa apestosa.

@drakemclemore7964 Жыл бұрын

Thanks Gavin! Your method worked for me today. You got my bricked drone up in time to capture the fireworks!

@thestorytellers314 3 жыл бұрын

JUST FIXED MY KARMA! You have to make sure each piece has the latest update. My controller updated on it's own and then it wouldn't pair. So after hours of trying I decided to update my camera and Karma stabilizer gimbal through quick app on my phone via bluetooth. After I did that I was able to pair but the drone wouldn't update and it kicked me back out so i went to my GoPro account / devices and pulled up Karma controlled and deleted the serial number. Once I re-entered the serial number and reset the entire controller everything was basically rebooted and up to date. I paired right up and automatically updated the drone. I'll upload video to my page.

@mrblack2090 2 жыл бұрын

Thank you so much this finally worked for me. I just want to say I’m starting to think GoPro has something to do with this issue and they can resolve it on there end. I’ve tried this probably 25 or 30 times with no success. I’ve even tried different things I’ve saw on other videos and nothing has worked. So yesterday I finally contacted GoPro and the was very helpful well I should say as helpful as he could be. He walked through all these different things to try to get the drone to connect to no avail. So he opened up a ticket and told me to create a video put it on KZfaq then send them the URL. So I did that last night. Now today for some reason don’t ask me why I said let me just try one more time. So I watched your video like I’ve done about 30 times before and followed it step by step. But this time when I put the harness in it activated. Every other time I’d put the harness in and nothing would happen. But now after opening a ticket with a GoPro tech and doing a video and posting it on KZfaq. It all of a sudden worked. It might sound crazy but I think it’s something on there end. I did give him the serial number on my drone and the serial number from the remote and now today it just comes to life. It’s either a real coincidence or something is up.

@1percentG 3 жыл бұрын

UPDATE: THIS ONLY WORKED FOR A COUPLE DAYS. NOW ITS BACK TO NOT PAIRING. We will be sending the letter within a week as soon as I am back into a city where I can print and ship it out!

@johnbacon3944 3 жыл бұрын

Sadly this does not work for me either!

@FreddieBatista 3 жыл бұрын

I signed up for the subscription for $4.99 a month and called GoPro and they waived my $126 fee and replaced my drone with a new one. Why submit a letter just call and get it replaced. The new updated messed up the core of the drone.

@FreddieBatista 3 жыл бұрын

@@johnbacon3944 just call GoPro and get it replaced.

@mmmaazzuurr 3 жыл бұрын

Where should I call customer service?

@mmmaazzuurr 3 жыл бұрын

@@FreddieBatista so I need to make this subscription and then called them

@ksolomon43 3 жыл бұрын

Thanks for your support bro congratulations on getting yours to fly. I repaired mine differently though. First off I had two thing wrong with mine. I was getting a error for landing leg not fully extended and no matter what I did I couldn’t get it to go away. So I bought a broken non pairing drone and switched out the circuit board on both sides of the drone that has the micro switches on them that tell the main board that the drone is is in the ready position. Second thing I did was change the complete main board out with the one that was supposedly not pairing and after one attempt it paired and it now works perfectly. I’m stoked. What I did see on my old board was some heat blueing from heat on one if the components I believe it was related to one of the pairing process. Total cost was 50.00 someone basically sold me their drone without controller gimble or camera. It was just for parts. Hope this helps. Figured that the drone is the drone sends the pairing signal so the issue must be with it. I also visually inspected every tape wire connection on the board and two of them had begun to turn color from corrosion I cleaned waterproofed and electrical glued them in place so they wouldn’t vibrate loose.

@DavidYarafaisou Жыл бұрын

From far in the pacific. Just saw your video and I'm going to try it. My drone been sitting in my closet for about a year. Thank you...

@HeinrichHB 3 жыл бұрын

Today I put the camera out and this worked many thanks for your help and I hope you will have yours back soon

@WL_26 3 жыл бұрын

This 100% worked for me! It took me about 4 attempts and the drone was still acting weird (would turn on with solid lights but was non responsive - would only turn off by pulling the battery) but it eventually paired! I wasnt sure it had worked as all the pairing screeen did was change to say - turn drone off when lights blink green. The lights werent blinking green but i turned it off anyway and it came up on the controller saying paired. The drone seems to still be acting weird and it takes me 3-4 attempts to turn it on and connect but the main thing is the controller is now paired! My advice for anyone trying this would be - If you get to a stage and it isnt behaving the same as described in the video just keep pulling the battery and leave the drone for a minute or so before trying again. I only did the first step once and repeated the later steps until it worked. Thanks Gavin! ETA - The missing step - Once the drone is functioning with the gimbal in place you need to turn it off using the power button before then pressing it to enter pairing mode. Theres no way of entering pairing mode while the drone is switched on.

@WL_26 3 жыл бұрын

UPDATE - my drone also stopped working after a few days... :-(

@billymcdonald8189 2 жыл бұрын

Thanks man! That did it for me. I thought it sounded a bit crazy but it worked beautifully.

@tuggokaydin5061 3 жыл бұрын

Unfortunately, my Karma is not shutting off unless I remove the battery. Yes, I do have the GroPro subscription but I am not sure what GoPro will do at this point. How strange for hundreds of people to experience the same issue. Gavin - Appreciate your efforts but I think you should send that letter!!!

@StephenStormLog 3 жыл бұрын

I'm another Karma user with the same pairing issue. My drone was purchased back in 2017, and I couldn't get past step 3 where the pairing mode turns itself off. After exhausting these and some other attempts, I contacted Gopro and am getting a new core. So while it sucks to have the issue, it was a pretty painless customer service interaction to get an RMA initiated - can't fault GoPro for its willingness to send a new drone.

@telecuteco123 3 жыл бұрын

I’m definitely going to try. Thank you for the tip.

@Tomasz.Nowacki 3 жыл бұрын

thanks for the heads up i will save this video and share with whoever needs help with Karma

@bozmanx Жыл бұрын

The drone powers off as it reaches the hardware failure timeout limit. There appears to be a couple of pairing issues, there appear to be a lot of people that cant put the drone into pairing mode because the operating system fails to load on the drone. Your operating system is loading hence you can put it into pairing mode and you can actually power the unit off with the power button.

@vck069 3 жыл бұрын

Its been 4 months since I contacted Gopro and two replacements later still doesn't work. I will be trying this out. Thanks for the tip.

@RhettLego 3 жыл бұрын

A thought. Do you think you were able to get a GPS signal inside the house where you resolved the problem. Do you think being able (or not) to access a GPS signal might alter outcomes?

@murraysanders7779 2 жыл бұрын

Brilliant man, just bought a second hand Karma , haven't tried to fly it yet , will let you know

@nzwoody 5 ай бұрын

hi, i've only just learned of all of this after trying to use my drone the other day, been sitting in the cupboard for a while. i tried your video, appreciate it. didn't work for me mine just stays in pairing mode. power button has no respone on drone and have to actually pull the battery out to turn it off. be lucky if i've flown it half a dozen times from new. guess i have a $2k brick. i'm in new zealand and going by this i'll never buy another gopro product in my life. was looking at a new action camera, won't be a gopro now!. appreciated your video and pleased you got your one repaired/replaced

@brynwilliams6770 2 жыл бұрын

Gavin, I tried your steps. Pairing mode keeps flashing. But I did do the update...Maybe that is why. Pairing mode has been flashing for 13 minutes now. After reading some your comments, I realize it best I just pull the battery to shut it off. Thank you for your video. I did email and I out my name on your class action suit list. Best Regards

@franscoisprinsloo3403 3 жыл бұрын

I am trying it now, will let you know how it goes. Thanks for staying on top of this.

@franscoisprinsloo3403 3 жыл бұрын

The drone I have does not auto shut down after entering pairing mode, been waiting for one hour now, no luck so far.

@sharathj188 3 жыл бұрын

kzfaq.info/get/bejne/pdOTms-hytbDias.html I too have the same problem, please try the above fix. The slow blinking red light didn't appear either.

@1percentG 3 жыл бұрын

@@franscoisprinsloo3403 does the power button light eventually change? (pairing mode means alternating red and green navigation lights with a flashing blue power button) Even if the drone doesnt shut down, eventually, does the blue light change?

@franscoisprinsloo3403 3 жыл бұрын

@@1percentG When you put it in pairing mode, it never shuts down. Normally turning it on the red light never starts flashing.

@caraudiocentral 3 жыл бұрын

@@franscoisprinsloo3403 Same as mine, it goes into pairing mode, the lights alternate blinking, but never shuts down.

@dl4085 3 жыл бұрын

Does not work for me. Mine stays in pairing mode what appears to be indefinitely. Also, my controller says it has an update availble, installs it, says it is successful, and then says again there is an update available. I've installed the update 3-4 times now..

@hugomariscal2598 2 жыл бұрын

Thank you 🙏🏽 works for me 🙌🏼

@MMonio 3 жыл бұрын

My Drone just stopped working today. I not used it for last 4 months. Before everything was good. I tried to do what you showed on the video but still is not working. I registered my name on your list. I hope GoPro will fix it! Best to you!

@telecuteco123 3 жыл бұрын

It didn’t work for me, the drone stay on and doesn’t shut down.

@FreddieBatista 3 жыл бұрын

Pay the $4.99 a month subscription and call support and they swap it out for you.

@arunkala3264 3 жыл бұрын

Does not work for me unfortunately, it continues to keep blinking during the first part when you want us to let it die on it's own.

@andrejlondon695 3 жыл бұрын

Same, it never swishing off

@juliemorin3789 3 жыл бұрын

me too

@Ricks2Cents 2 жыл бұрын

Same…

@brucechurch7840 2 жыл бұрын

Hi, I'm getting a Compass interference message - move to a new location or recalibrate the compass. Any advice welcomed how to recalibtrate the compass, please. Thanks

@lilltarmen 2 жыл бұрын

Hi Garvin, I tried but Drone will not power off from pairing mode. So I am now trying to get a replacement drone from GoPro who (believe it or not) pretend like they never heard about this problem before.

@hornpoutclout Жыл бұрын

OMGawwwd brother I love you more than life right now and after like 5 years of sorrow missing my karma which I only got like a dozen flights it has been horrible I’m sure you get it ❤❤❤❤ I love you man

@kyleconger6544 Ай бұрын

Its 2024 and this still works. Still have issues with GPS and calibration every now and then but i can still fly it.

@roryj60 Жыл бұрын

Great to see your karma working similar issues I can get mine to pair and but comes up with fully extend the landing gear which I replaced with a new one still no change any ideas ?

@edwardsehnert3311 3 жыл бұрын

I tried your fix and others and nothing. Some how I got it to pair. Just by trying different things. I'm not sure if it is a fluke or not. Going to try to see what I different and I will share with you all.

@chariselee4047 Жыл бұрын

Hi Gavin! I know this is an old video but I found you but pulling out my Karma last week and trying way too many time YET AGAIN to get it to pair. What would you recommend I do at this point….contact GoPro?

@orvillehendrik7475 3 жыл бұрын

I had the same problem Karma send me a replacement drone. I try to pair it and it did the same. I followed your steps the drone went from slow flashing to fast flashing and it showed the red error button. The button changed from blue to red. Let it sit for a while but it did not shutoff. I pushed the button to shut it off. followed the rest of the steps but it never activated the camera kimble. Any more suggestions. I appreciate your video . I will try it a couple more times. Thanks.

@doncooper3165 Жыл бұрын

Did not work for me, never shutdown at the first step of the drone by itself.

@allancox4694 3 жыл бұрын

Wow, I'm shocked and disappointed that GoPro have just announced they are pulling the plug. I'm intrigued to know what the problem was, software or hardware, that grounded the Karma. Great Cameras, would have been great to use it in the air. Maybe another brand will develop the concept.... R I P Karma.

@netoargentino 2 жыл бұрын

god one! its help me today! happy new yer bro!!

@jesseliddle8537 Жыл бұрын

I have tried to do this with my one but it won’t auto shut off when put in pairing mode, stayed on till the battery died 😢

@pierremauricemuller1017 3 жыл бұрын

I succeed to pair and making fly the drone. I can also calibrate the "boussole" and "accéléromètre". The camera was taking vidéos and moving well. But next time I try to switch on the drone : Nothing appened. The bug start again. I don't understand what happened. This make sure that the hardware is OK ? Or can it be a deficient electric contact ? In this case why does the button on/off stop working ? I have not any answer and I wrote to Gopro in France and in States that they give me a solution. Thank Gavin for your help and action. Pierre

@UbayLanas 3 жыл бұрын

I tried to follow your process but it is in pairing mode but never shut down. I still have an unresolved issue.

@JayBearjaysbigadventure 2 жыл бұрын

Thanks for the great video! My drone doesn't shut itself off when in pairing mode. What would you do next? Thanks so much for your help. I want to fly this for my car and motorcycle channel, so any help would be greatly appreciated!

@A61CORDE 2 жыл бұрын

i have the same problem, did you have any luck.?

@mackm1962 Жыл бұрын

THANK YOU, I DID EVERYTHING HE SAID AND IT WORKS 100%. THANKS MY DRONE WPRKS PREFECT

@MrCarloptor Жыл бұрын

🤔

@ikawtubo47 2 жыл бұрын

HI Gavin I'm so sorry for having this problem unresolve. I am from Canada, and I was away for about 2yrs. now and I did not bring my drone with me while vacationing in the Philippine. Due to Covid wasn't able to go back to Canada because of restriction . Now I'm start to worrying knowing when I get back I won't be able to fly my drone. I hope by the time I get back everything will be back to normal and fix the problem. Thanks in advance.

@nathanrank 3 жыл бұрын

Any updates on getting my drone back in the air I am on my way to the house to try this I really hope it works ..!! Shouldn’t GoPro take responsibility for this problem considering people paid good money for there drones and now they can’t fly?? VERY VERY FRUSTRATING!! We should not have to pay to fix there problem

@RhettLego 3 жыл бұрын

So I’ve followed what you did. Mine does not power down at all. And the Power button flashes only Blue during this attempt. No harness is in the drone. Others here seem to have the same symptoms.

@richardsupertramp4885 3 жыл бұрын

Hey guys, thanks for all your recommendations, especially Gavin. My Karma NOW got connected again. Heres what I did: I did all the steps, but I tried to install the update from the controller at the point before I put my GoPro (6) in it again. Then I updated the drone first. Then I began at the step where the empty gimbal is in it and put the GoPro into the gimbal. First without battery. Then with the battery and then I updated the GoPro. (In my case it always tried to update the camera first - before the drone itself) Now I could connect the drone- its didnt get a GPS signal first, but when I went outside I could fly it-perfectly. Thank you so much for sharing Gavin and good luck with all your Karmas. Cheers, Richard

@wrigna1 2 жыл бұрын

When I go to put my GoPro Karma in pairing mode (as instructions show at 2:30) I'm definitely not getting any green or red lights under the propellors at all. Does anyone know of a possible solution for this issue? Thanks in advance!

@bnuuuz4135 2 жыл бұрын

Thanks!! My drone is working again🙏🏼

@A61CORDE 2 жыл бұрын

mine is working too

@hakanfranzen8234 2 жыл бұрын

Hi Gavin, Thanks for your effort to try to solve our problem with pairing our Karmas. I have tried to pair my Karma according to your video, but it didn't work. So, I'm another person, now also from Sweden, looking for the solution to get my Karma to fly again. Please, let me know if you find the right solution. Thanks in advance

@prasadbuggaram7665 3 жыл бұрын

Thank you sir 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻I’m reallly happy

@alial-janabi2526 3 жыл бұрын

I'm not 100% (dont have access to the drone atm) but I've read somewhere that GoPro updated their GPS data which was causing the issue. Something about the Real Time Clock sync with satellites. Wish I was of more help. Good luck team.

@jaimegutierrez122 3 жыл бұрын

I also have a drone, the problem is with the camera. NO CAMERA FOUND? What I can do?

@sylverview Жыл бұрын

Hi Gavin, I performed step by step the procedure and it woks, however after I shutt off the drone and then put it on again. The problem was still there it meance the gimbal and the camera don't pairing with the drone and the controller shows not karma find at the screen. Then I tryed to do it againg uncesfully

@ShootingStars321 6 күн бұрын

What up dude, I’m so stoked for you because I’m suffering the same go pro karma drama, however my drama is slightly different, mine says that it is already paired when I check under pairing, then I try to press start to get is hummin’, yet I either get to a red warning on the upper screen of the remote while that tells me I have a “connection” issue and to try again later 🤷🏻‍♂️. Bat in hand, I’m about to go office space on this thing if it doesn’t show me a sign of life soon, please let me know if you have any suggestions other than what worked for you here, but fyi I’m going to use your video right now to see if this magically helps mine resuscitate too, why not

@hn1260 3 жыл бұрын

I will do it tonight and I will let you know thank you so much .

@bmxbebolol1 3 жыл бұрын

what happened?

@hn1260 3 жыл бұрын

@@bmxbebolol1 Nothing happened

@ColdSnapCarl 8 ай бұрын

lol the truth is about the Karma is that many have blue tooth modules failure. It sucks if this happens to you. I have had mine for years and have no problems tho. Glad this worked for you but for most it will not. GoPro really screwed the pouch on this drone as far as that goes. Other than that it’s a great mean drone.

@nickross3944 2 жыл бұрын

I have tried your process several times. My drone just stays in pairing mode until the battery dies. I haven’t been able to fly it for almost two years now. Every time an update came down I’d have issues with it. When it works I really like it though.

@ChadwickRider 2 жыл бұрын

Exact same as you, mine doesn't shut down automatically. I've flown this thing like 3 times I think. Never again.

@FredyTorresProducer 3 жыл бұрын

awesome man ! mine here in Brazil wont work either ! trying the best but it doesnt work for me at all ! wont turn it off on pair mode ever ! hehe thanks anyway for the videos

@alexandres.m.322 3 жыл бұрын

O meu esta aqui no Brasil também. O que vc vai fazer com o seu?

@cidomar 3 жыл бұрын

mais um triste brasileiro com o mesmo problema aqui. vcs conseguiram resolver?

@alexandres.m.322 3 жыл бұрын

@@cidomar Até agora não. Isso foi sacanagem demais. Para nao precisarem atualizar as restrições do espaço aéreo simplesmente fizeram um firmware malicioso que deixou inútil o equipamento? Se foi isso é uma solução muito desonesta.

@charlesadderley1215 3 жыл бұрын

I tried both methods nothing seems to work.. so I’m basically stuck at step one. When I put my drone in pairing mode the power button just keeps blinking red and won’t shut down. I also tried putting in the harness while the power light is blinking red no activity..

@danielrendon3197 3 жыл бұрын

I’m trying this fix but nothing happens, I’m so stressed out about this problem... thanks for trying to help...

@ChevelleLife 2 жыл бұрын

Have you tried to calibrate your compass? Mine keeps failing the vertical test and I can still fly but no GPS. I doubt I have 30 hours of flight time because I’m always afraid to fly it with all the issues it’s had. Help.

@PartenaviaNV Жыл бұрын

I just acquired some that didn't get the Jan.2020 update that fixed the compass calibration issue, and now all updates are unavailable. Did you find anything that worked?

@eivarjavier4654 Жыл бұрын

Thank you for the video Gavin. I did the process but the Karma Drone never turn off when pressed the button for pairing mode. Had to remove the battery. Need more help please.

@martinberky5987 4 ай бұрын

did you solve it? ... ive the same

@nadeemkasmani Жыл бұрын

So this is my understanding - I did a firmware update on the controller and my hero6blk- but I cant seem to be able to update the gimbal, which updates the stabilizer - in order for the drone to work all three need an update and the gimbal gets updated with the QUIK app which my gimbal just wont connect to.

@jdsrealisticreviewsrants4482 2 жыл бұрын

Do You have to go through this every time you want to fly it

@Amerinka 3 жыл бұрын

Didnt work for me, drone dosent turn off when in paring mode. :/ waiting for some news

@mmmaazzuurr 3 жыл бұрын

Any other ideas I didn’t use a drone for couple months

@deepbluefantasea 2 жыл бұрын

I am was a little confused about the process I have six karmas and they haven’t been flown in over a year I had them all updated when they had a crash a year and a half or two years ago and I spent a whole day and got them all going at that time. I flew them that summer and they were sitting for well over a year maybe a year and a half I pulled them out two of them and I got the same message on my screen Karmin not found. I wrote a few things One been to turn off the Wi-Fi so the Wi-Fi I did turn off I did not try to repair the two do I need at any point to turn on the pairing mode on the controller that’s where I’m confused. As I said these did work fine a year and a half ago. I didn’t see you put the controller into pairing mode at any point am I doing something wrong with that.

@johnjacob290 Жыл бұрын

Smartest drone owner

@wartelmanvega8860 26 күн бұрын

I did the go pro costumer service using the go pro service video service and unfortunately they said, they can not help. I explain to them that once I updated the drone it stop working. they are awere of this and decided they can not help. so sad.

@roysmith4563 3 жыл бұрын

I manually pair on each powerup. Works every time.

@machart9678 2 жыл бұрын

How do you manual pair

@thunderroad7289 2 жыл бұрын

How do you do that?

@hazefilms8995 3 жыл бұрын

@gavin gene where u live ? I bring u my gopro karma drone and u will fix this ?

@ruebenwillis3639 Жыл бұрын

Hi Gavin,great job and great video, I have a question for you, is your Karma drone still flying, I need help

@christopherkolb8951 3 жыл бұрын

No luck, the only way I can turn off my Karma is to take the battery out. I just keep getting the fast blinking lights. Thanks for putting this out there and getting the letter together. Not even the Nintendo slap will work......

@caraudiocentral 3 жыл бұрын

Same here :(

@gamberride9780 3 ай бұрын

Going on 6 minutes of the drone trying to pair. Not pairing and not shutting down by itself. Damn GoPro!

@mannykaras7278 3 жыл бұрын

Hi, my karma currently flies but the controllers say an update is available. I am scared if I up date it then it might not fly. What do you think I should do? Thanks

@1percentG 3 жыл бұрын

never update anything ever. lol its up to you man but honestly I dont suggest it

@ksolomon43 3 жыл бұрын

I agree

@XYDogAustria 2 жыл бұрын

Ich habe das Problem auch vor 2 Tagen angefangen mit Support gesprochen haben mir anleitung geschick wo garnix bringt. Habe es genau auch so gemacht wie auf deinem Video. wo ich nach 1std gekommen bin hat die immer noch Grün und Rot geblinkt nervig das ganze.Wenn die Drohne wenigstens mal abschalten würde Nein macht sie nicht. Mein Problem ist das sie davor immer Top geflogen ist. und nach 3 bis 4 Wochen wollte ich sie mal Testen Fliegen, aber beim einschalten ist gekommen Kopplung nicht möglich ich also entkoppelt in der anahme ich kann wieder Kopplen falsch gedacht. Wenn ich die Gopro Karma Starten Power Knopf schaltet sie normal ein Problem Gimbal null Reaktion mit der Gopro6.habe auch schon versucht den Controller auf Werkseinstellung zurück zu stellen alles neu gestarten nix keine Kopplung möglich.Das beste wer wenn es irgendwie eine möglichkeit gibt die GoPro Karma komplett zurück zu stellen Software Firmware ??? geht das irgendwie finde leider keine Hilfe dazu.Lg Tom aus Austria Vorarlberg. ich habe auch die Dji Mini 2 Top ding ich finde aber die Karma ist auch gut wenn sie nicht ohne Grund aufeinmal diesen fehler hätte?? Meine Drohne ist wie neu kein absturz gehabt oder sonst was in der Art deshalb Wundert es mich warum die aufeinmal so einen Spinner hat.

@Ricks2Cents 2 жыл бұрын

It’s not recognizing my harness. My dies not time out after leaving attempting to sync.

@ldgoto 3 жыл бұрын

my drone is not turning off by itself , but very good the tip I will do it several times

@kevinlieb 3 жыл бұрын

This didn't work for me. I tried 15 times or so. I suspect the firmware on the drone is just corrupt or broken. Anyone found a way to update firmware hard-wired to the drone? Via USB or jtag or serial or something??

@joellmarcio Ай бұрын

Olá. Tentei estes procedimentos. Mas já no primeiro passo, o drone não desliga sozinho. Então, não consegui continuar os outros passos. Tenho dificuldade em desligar o drone pelo botão. Para desligar, tenho que tirar a bateria. Tem alguma sugestão?

@visionunlimited7128 3 жыл бұрын

Trying this now, although it sounds like it didn't work for most people. I'd like to add my name to this GOPRO letter. Please let me know how.

@user-gp9kb7tv3u 8 ай бұрын

ضلت تعطي ضوء احمر واخضر ولم تنطفئ على العموم شكراً لمجهودك 🇰🇼👋

@PlayzLife 2 жыл бұрын

My Karma does not shut off after 3 minutes and beyond, and then when I turn it on without the harness and gopro inserted the flashing red/yellow lights never happen. I don’t know what to do and I have also tried resetting the controller.

@clarice-clubedaarea6680 Жыл бұрын

Hi Gavin, in step 3, the drone does not turn off by itself, which prevents you from following the other steps. Do you know how to solve this too?

@Kujbor Жыл бұрын

Same fail for me. Did you end up finding a solution?

@A61CORDE 2 жыл бұрын

Hello, i just wanted to use my drone , and I have found that my has the same problem you had, also it does not turn off unless i remove the battery. very extrange issue . i have use my drone for months . i will follow and see if it works for me. Thanks for the video.

@A61CORDE 2 жыл бұрын

Believer or not, today after I have give up with my drone. I decided to try again and guess what. The pairing has work. Blue light flashing and green to conected My drone is now flying, tested